[Solved] CS3013 Project 4- Scheduling Policies

$25

File Name: CS3013_Project_4-_Scheduling_Policies.zip
File Size: 348.54 KB

SKU: [Solved] CS3013 Project 4- Scheduling Policies Category: Tag:
5/5 - (1 vote)

5/5 – (1 vote)

Scheduling policies play an important role in operating systems by deciding what gets resources and when. In this project, you will gain hands-on experience in how dierent scheduling algorithms work and their re- spective pros and cons under various workloads. At the high level, you will be implementing three scheduling policies: first-in-first-out (FIFO), shortest job first (SJF), and round robin. All of the policies should be implemented in scheduler.c and should be compiled to an executable named scheduler.

This project is divided into two phases:

  1. Scheduler Implementation: The scheduler should implement the FIFO, SJF, and round robin policies. The scheduler takes three command line arguments: policy name, job trace, and time slice. For example, your implementation should support calling in the following format ./scheduler FIFO tests/1.in 0 for using the FIFO policy to schedule the jobs from the file tests/1.in.
  2. Policy Analysis: The scheduler should output information necessary for analyzing the performance of the policies. This analysis should focus on three metrics: response time, turnaround time, and wait time. You will also develop five novel workloads that satisfy a given set of constraints.

All coding is to be done in the C programming language without using any non-standard libraries. The TAs will grade the project using a 64-bit Ubuntu 20.04 virtual machine. Projects that do not compile or run correctly on the TAs virtual machines will be penalized.

We now describe each project phase in greater detail, along with how to leverage the testing framework to verify the schedulers behavior.

Phase 1: Scheduler Implementation

Students will implement a simulated workload scheduler. It must accept three command line arguments:

1. the name of scheduling policy, either FIFO, SJF, or RR;2. the name of the workload file, described below; and3. the timeslice duration, which is only applicable to the round-robin policy.

In short, the scheduler will take as input a set of jobs that need to be simulated. This job set is called a workload. The scheduler will be responsible for determining the order in which the jobs are scheduled and the duration for which they scheduled. The order depends on the scheduling policy. You will be responsible for implementing three scheduling policies: first-in first-out (FIFO), shortest job first (SJF), and round robin (RR). Note that all jobs are simulated, so the simulator does not need to perform any real work.

Each workload is defined in a workload file. Each line of the workload file represents a dierent job in the workload and the provided number is the total amount of simulated time that job needs to run. For example the workload file 2.in contains the following:

$ cat tests/2.in

3 10

16

1 2 3 4

1

15

15 9

17 11

2 10

5 6 7 8 9

10 11

1 2 3 4 5 6 7 8 9

10 11 12 13

Listing 1: An example input file

In this workload, there are a total of 10 jobs. The jobs are listed in the order of their arrival, so the job on the first line arrives first and has a run time of 3 units. Similarly, the second line corresponds to the job that arrives second and has a run time of 10 units.

The scheduler then uses the job file to initialize a job list data structure. In this list, each job should be assigned an id based on the line number in the workload file. For the above example, the job on the first line should be assigned an id of 0; the job on the second line should be assigned an id of 1; and so on.

More specifically, the job list should be implemented as a linked list of structs. Each struct should resemble the following:

struct job { int id;

int length;// other meta data

struct job *next; };

1 2 3 4 5 6

After initialization, the scheduler will simulate the execution and scheduling of these jobs using the appropriate policy and printing output similar to the examples shown in this specification.

Policy Implementation: FIFO

The FIFO policy is one of the simplest scheduling policies, which makes it a good starting point. The FIFO policy states that jobs are scheduled in order of their arrival. Further, each job runs to completion. In other words, there is no preemption for this FIFO policy.

For example, the schedulers output when using the FIFO policy with workload 2.in should be:

$ ./scheduler FIFO tests/2.in 0

Execution trace with FIFO: Job 0 ran for: 3

Job 1 ran for: 10 Job 2 ran for: 16

Job 3 ran for: 15 Job 4 ran for: 15

Job 5 ran for: 9 Job 6 ran for: 17

Job 7 ran for: 11 Job 8 ran for: 2

Job 9 ran for: 10End of execution with FIFO.

Listing 2: Expected output when using the FIFO policy

Policy Implementation: SJF

The shortest job first (SJF) policy requires that the scheduler always pick the job with the shortest runtime to run next. Just like the FIFO policy, we again assume that all jobs will run to completion before the next job is started.

For example, the schedulers output when using the SJF policy with workload 2.in should be:

2

$ ./scheduler SJF tests/2.in 0

Execution trace with SJF: Job 8 ran for: 2

Job 0 ran for: 3 Job 5 ran for: 9

Job 1 ran for: 10 Job 9 ran for: 10

Job 7 ran for: 11 Job 3 ran for: 15

Job 4 ran for: 15 Job 2 ran for: 16

Job 6 ran for: 17End of execution with SJF.

1 2 3 4 5 6 7 8 9

10 11 12 13

Listing 3: Expected output for using the SJF policy

If two jobs need the same amount of time to execute, e.g., Job 1 and Job 9, the SJF policy breaks the tie by favoring the job that arrived earlier. In the above example, the SJF policy will first run Job 1 and then Job 9.

Policy Implementation: Round Robin

Like FIFO, the round robin policy schedules jobs in the order of arrival. Unlike FIFO, the round robin policy (RR) dictates that each job will only be run for a fixed duration of time, called a time slice, before another job is scheduled. If the remaining duration of job exceeds the length of the time slice, than that job must be preempted. This use of preemption distinguishes the round robin policy from the FIFO and SJF, both of which run jobs to completion once started.

The length of the time slice is passed to the scheduler as a command line argument. For example, the schedulers output when using the RR policy with workload 2.in and a timeslice of 9 units should be:

$ ./scheduler RR tests/2.in 9 Execution trace with RR:

Job 0 ran for: 3 Job 1 ran for: 9

Job 2 ran for: 9 Job 3 ran for: 9

Job 4 ran for: 9 Job 5 ran for: 9

Job 6 ran for: 9 Job 7 ran for: 9

Job 8 ran for: 2 Job 9 ran for: 9

Job 1 ran for: 1 Job 2 ran for: 7

Job 3 ran for: 6 Job 4 ran for: 6

Job 6 ran for: 8 Job 7 ran for: 2

Job 9 ran for: 1End of execution with RR.

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20

Listing 4: Expected output for using the Round Robin policy (time slice is 9)

Phase 2: Policy Analysis

In this second phase of this project, students will add code to their scheduler to help them evaluate the performance of the previously implemented policies using three metrics: response time, turnaround time, and wait time. Without loss of generality, we assume that all jobs arrived at the system at the same time T = 0.

3

If a job starts and completes its execution at time Ts and Tc respectively, this jobs response time can be calculated as Ts T and its turnaround time can be calculated as Tc T . The wait time describes the time the job spent waiting instead of running after its arrival. For the FIFO and SJF policies, wait time and response time are the same. For RR policy, wait time also records to time that jobs spend waiting for their next time slice.

The modified scheduler should output both the per-job and the average performance for the workload. For example, the scheduler should output the following when running the FIFO policy with workload 2.in:

$ ./scheduler FIFO tests/2.in 0

Execution trace with FIFO: Job 0 ran for: 3

Job 1 ran for: 10 Job 2 ran for: 16

Job 3 ran for: 15 Job 4 ran for: 15

Job 5 ran for: 9 Job 6 ran for: 17

Job 7 ran for: 11 Job 8 ran for: 2

Job 9 ran for: 10End of execution with FIFO.

Begin analyzing FIFO:Job 0 Response time: 0 Turnaround: 3 Wait: 0

Job 1 Response time: 3 Turnaround: 13 Wait: 3 Job 2 Response time: 13 Turnaround: 29 Wait: 13

Job 3 Response time: 29 Turnaround: 44 Wait: 29 Job 4 Response time: 44 Turnaround: 59 Wait: 44

Job 5 Response time: 59 Turnaround: 68 Wait: 59 Job 6 Response time: 68 Turnaround: 85 Wait: 68

Job 7 Response time: 85 Turnaround: 96 Wait: 85 Job 8 Response time: 96 Turnaround: 98 Wait: 96

Job 9 Response time: 98 Turnaround: 108 Wait: 98 Average Response: 49.50 Turnaround 60.30 Wait 49.50

End analyzing FIFO.

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

1

The scheduler should output the following when running the SJF policy with workload 2.in:

$ ./scheduler SJF tests/2.in 0

Execution trace with SJF: Job 8 ran for: 2

Job 0 ran for: 3 Job 5 ran for: 9

Job 1 ran for: 10 Job 9 ran for: 10

Job 7 ran for: 11 Job 3 ran for: 15

Job 4 ran for: 15 Job 2 ran for: 16

Job 6 ran for: 17End of execution with SJF.

Begin analyzing SJF:Job 8 Response time: 0 Turnaround: 2 Wait: 0

Job 0 Response time: 2 Turnaround: 5 Wait: 2 Job 5 Response time: 5 Turnaround: 14 Wait: 5

Job 1 Response time: 14 Turnaround: 24 Wait: 14 Job 9 Response time: 24 Turnaround: 34 Wait: 24

Job 7 Response time: 34 Turnaround: 45 Wait: 34 Job 3 Response time: 45 Turnaround: 60 Wait: 45

Job 4 Response time: 60 Turnaround: 75 Wait: 60 Job 2 Response time: 75 Turnaround: 91 Wait: 75

Job 6 Response time: 91 Turnaround: 108 Wait: 91 Average Response: 35.00 Turnaround 45.80 Wait 35.00

End analyzing SJF.

The scheduler should output the following when running the RR policy with workload 2.in: $ ./scheduler RR tests/2.in 9

4

Execution trace with RR:

Job 0 ran for: 3 Job 1 ran for: 9

Job 2 ran for: 9 Job 3 ran for: 9

Job 4 ran for: 9 Job 5 ran for: 9

Job 6 ran for: 9 Job 7 ran for: 9

Job 8 ran for: 2 Job 9 ran for: 9

Job 1 ran for: 1 Job 2 ran for: 7

Job 3 ran for: 6 Job 4 ran for: 6

Job 6 ran for: 8 Job 7 ran for: 2

Job 9 ran for: 1End of execution with RR.

Begin analyzing RR:Job 0 Response time: 0 Turnaround: 3 Wait: 0

Job 1 Response time: 3 Turnaround: 78 Wait: 68 Job 2 Response time: 12 Turnaround: 85 Wait: 69

Job 3 Response time: 21 Turnaround: 91 Wait: 76 Job 4 Response time: 30 Turnaround: 97 Wait: 82

Job 5 Response time: 39 Turnaround: 48 Wait: 39 Job 6 Response time: 48 Turnaround: 105 Wait: 88

Job 7 Response time: 57 Turnaround: 107 Wait: 96 Job 8 Response time: 66 Turnaround: 68 Wait: 66

Job 9 Response time: 68 Turnaround: 108 Wait: 98 Average Response: 34.40 Turnaround 79.00 Wait 68.20

End analyzing RR.

2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Policy Analysis: Novel Workloads

Finally, you must design a set of workloads that meet the following conditions:

  1. Design a workload of a least 5 jobs for the RR scheduler such that the wait time is the same as the response time for all jobs. Assume a time slice of 3 time units. Save this workload into a file named workload 1.in.
  2. Design a workload of at least 5 jobs such that the average turnaround time of the FIFO scheduler is approximately 10 times that of the SJF scheduler. Save this workload into a file named workload 2.in.
  3. Design a workload of at least 5 jobs such that FIFO, SJF, and RR produce the same average response time, turnaround time, and wait time. Assume a time slice of 3 time units. Save this workload into a file named workload 3.in.
  4. Design a workload of at least 5 jobs such that RR produces an average wait time of less than 5 time units but a turnaround time greater than 100 time units. Assume a time slice of 3 time units. Save this workload into a file named workload 4.in.
  5. Design a workload of exactly 3 jobs such that FIFO produces an average response time of exactly 5 time units and an average turnaround time of exactly 13 time units. Assume that the first job has a duration of 3 time units. Save this workload into a file named workload 5.in.

Test Cases

We will provide a bash script named run tests.sh and a directory called tests that includes a selection of test workloads. You should not modify the existing files, but you are welcome to add additional test workloads if you see fit.

5

$ ./run_tests.sh -t 1

test 1: passed$ ./run_tests.sh -t 2

test 2: passed$ ./run_tests.sh -t 3

test 3: passed

1 2 3 4 5 6

1 2 3 4 5 6 7 8

Students can use the run tests.sh to test their implementation against the provided workloads. The option -t specifies the test ID to run.

Listing 5: The test cases for FIFO implementationIf a test fails, students can get more information about the specifics by passing the verbose option -v:

Listing 6: An example of getting verbose output from a failed test caseStudents may also find it useful to directly inspect the files associated with each test. Below explains

what each file is used for in the tests directory:

*.rc: Program return code (usually 0 or 1) *.out: The expected standard output from running the test *.err: The expected standard error from running the test *.run: The command line to run the test *.desc: A short description of the test *.out.tmp: A temporary file for comparing the output

Finally, students may find Unix command line utilities such as diff useful in debugging the mismatched output formats. Please consult the corresponding man pages for more information.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
[Solved] CS3013 Project 4- Scheduling Policies
$25