[SOLVED] schemeCS 450 Homework 6

This assignment consists of reading, understanding, and modifying the metacircular evaluator in Chapter 4 of Abelson and Sussman. The assignment has lots of pieces. Be sure you start early. Moreover, some of the things you need to do are more subtle than you may first think.

Copy file ~offner/cs450/hw6/s450.scm to your hw6subdirectory. That file contains all the relevant code from A&S, with small changes so that it runs in UMB Scheme. The name of the evaluator has been changed to s450. The invoking function is now (s450), not (driver-loop). This is the file we have been discussing in class.

You will create two files (which I will collect):

• s450.scm This will be the (commented) scheme code that you write. It will be an edited version of the original s450.scm .
• notes.txt This is for more discursive comments and discussion about the decisions you made in implementing the code for these problems, how you tested the code, and anything else that might be relevant.

1. (You should have already done this.) Play with the s450 evaluator:

   % scheme s450.scm==> (s450)s450==> ...

   or

   % scheme==> (load "s450.scm")==> (s450) s450==> ...

   See how much of real Scheme is there. Write (in notes.txt) about what you found.

2. Rewrite xeval so that the handling of special forms is data directed. (This is Exercise 4.3 on page 374.) For each special form ( lambda , set! , cond , define , quote , ) there is an appropriate semantic actiona scheme procedure A&S have already written. If you put those actions in a lookup table keyed by the symbol representing the special form then the cond in xeval will be much shorter, with a single table lookup for almost all the cases now listed separately. And you will be able to add special forms to s450 without editing xeval , which will now look something like this (in pseudocode):

    let action = (lookup-action (type-of expression)) if lookup succeededinvoke action, passing it the expression and the environmentelse cond ... ;; check for a few other types of expressions

   You should write scheme functions like lookup-actionand type-ofto hide the lookup table implementation. (There are various ways to build a lookup table. You might want to review Section 3.3.3 (pages 266271) for some ideas.) And for clarity below, we will sometimes refer to this lookup table as the special form table, since that really is what it is.

   Theres nothing fancy going on here. And type-ofis an extremely simple procedure that just takes the expression and tells you what special form it represents. Its that simple.

   Please note that this lookup table for special forms is not part of the environment. Its completely separate. The only thing that is managed by the environment is variables, and a special form name is not a variable.

   To insert a new special form in the special form table, write the procedure install-special-formand call it this way (for example):

    ==> (install-special-form 'set! (lambda (exp env) ... ) )

   Since install-special-formis not itself a special form in scheme, its first argument will be evaluated, and therefore generally needs to be quoted, as in the example above, to prevent this. (Indeed, it is possible to call install-special-formwith the first argument being an unquoted expression that evaluates to the symbol for the form you are installing.) The second parameter, action, should be a lambda expression (or something that evaluates to a lambda expression) that takes twoparameters, expand env. xevalin s450 will arrange to pass those parameters when action is called. Since install-special-formis not a special form, that lambda expression will be evaluated in the environment in which install-special-formis called before being passed to the body of install-special-form.

   Since install-special-formis called only for its side effect, it returns no useful information. However, to avoid generating garbage, have it return the name of the special form being installed.

   Your implementation should ensure that a new special form cannot be installed using the name of a variable that is already defined.

   Similarly, a special form (that is already in the special-form table) cannot be reinstalled using install-special-form.

   Once you have written install-special-formyou can save yourself lots of time typing at the s450==>prompt to test your code by installing loadas a special form. The code you need is in ~offner/cs450/hw6/load.s450.

   If you do this, pleaseinclude the text of load.s450in your file s450.scm. Dont (load "load.s450").

3. Clean up the way primitive procedures are installed in s450: write a procedure install-primitive-procedure that can be called like this:

   (install-primitive-procedure <name> <action>)

   For instance,

    (install-primitive-procedure 'car car)

   This procedure should insert the definition of the primitive procedure directly in the global environment. Make sure that it is impossible to reuse the name of a special form for the name of a primitive procedure.

   Note that as before, since install-primitive-procedure is not a special form, the name generally needs to be quoted.

   As in the case of install-special-form, this procedure is called purely for its side effect, so it does not return a useful value. However, to avoid generating a lot of garbage, have it return the name of the primitive procedure being installed.

   This is important! After you have done this, change the startup code so that all the primitive procedures are created by calls to install-primitive-procedure . And then be sure to delete the original code that defined the primitive procedures. So in particular, you should not have the variables

    primitive-procedures primitive-procedure-names primitive-procedure-objects

   in your code. Please make sure they are no longer in your code; Im going to check for that.If you dont understand what I mean here, please get in touch with me. This is a small thing you need to do, but if you dont do it, my tests just wont work.

   Then install +and some other scheme procedures of your choice as primitive procedures in s450. Note that a primitive procedure in s450 does not have to be primitive in the underlying scheme.

4. In s450 now, entering the name of a special form at the prompt causes a crash. Fix things so that instead a message is generated, like this:

   s450==> ifSpecial form:if

5. Fix things so that the name of a special form cannot be redefined or assigned to. That is, we should not be able to get away with typing

   s450==> (define if 3)

   or

   s450==> (set! if 3)

6. Write and install the following new special forms:
   
   

   (defined? <symbol>)	returns #tiff the <symbol>is defined in the current environment.
   (locally-defined? <symbol>)	returns #tiff the <symbol>is defined in the first frame of the current environment.
   (make-unbound! <symbol>)	removes the <symbol>binding(s) from every frame in the current environment.
   (locally-make-unbound! <symbol>)	remove the <symbol>binding from the first frame of the current environment.

   (These last two special forms constitute Exercise 4.13 on p. 380 with the issue raised there resolved.)

   locally-make-unbound!should not report an error if the <symbol>is not locally bound to begin with. There is just nothing to do in that case.

   Design a way to test these four new special forms. Hint: in order to create a situation in which the local and global versions of your new special forms should behave differently, you will have to build some environments with more than one frame. The only way to do that from the s450 prompt is by applying a procedure. (And see the note above about loading s450 test files.) For instance, you might try defining something like this within s450:

    (define f(lambda (a b)(display (locally-defined? a))(display (locally-defined? b))(locally-make-unbound! a)(locally-make-unbound! b)(display (locally-defined? a))(display (locally-defined? b)))) 

   and then executing (f 3 4). What should happen? And there are more complex expressions you could create. You should do that as well. And you should write about this in notes.txt, of course.

• My testing script relies heavily on install-special-form and install-primitive-procedure . So you have to make sure that you have implemented them. If you havent, I wont be able to test your code. This is important. I dont care how good the rest of your code is. If these two procedures dont work, nothing else will make sense.If you need help, ask me for it, and please ask early.
• You will be making extensive changes to the file s450.scm ; please make frequent backups, and make sure your code is clean and understandable. This is by no means a trivial matter of last-minute cleanups: you will probably end up moving large amounts of code from one part of the file to another, and introducing whole new sections of code. Your code (and your notes.txt file) has to be written so that
  • You can understand it now.
  • I can understand it now.
  • You will be able to understand it in six months. (And dont kid yourself: this is a stringent test.)

  You will be using your code as the starting code for the next assignment (Yes! I really meant that!), so it has to be absolutely clearly written.

  And to say again something Ive said before: when you write this code (and these notes), dont imagine that you are the student and I am the teacher. Instead, imagine that you are a senior programmer in some company who has developed this code, and that you are about to move on to a different project. Imagine that I am a junior programmer who has just been hired to take over your code. I dont understand very much about it (or anything else) at all, and the only thing I have to go by is the notes and comments that you have written, as well as the code itself, which therefore also has to be clear and well-formatted.

• Finally, one thing I have noticed in the past: Some people seem to think that because we are storing the actions for special forms in a special forms table, then we must also be storing the actions for primitive procedures in a primitive procedures table. This is absolutely false! Where are primitive procedures stored? Make sure you know the answer to that question.