1 Introduction

The purpose of this assignment is to become more familiar with bit-level representations of integers (and floating point) numbers. Youll do this by solving a series of programming puzzles. Many of these puzzles are quite artificial, but youll find yourself thinking much more about bits in working your way through them.

2 Logistics

All handins are electronic. Clarifications and corrections will be posted on the course Moodle page. Grading will be done through interviews.

3 Handout Instructions

Start by copying datalab-handout.tar to a (protected) directory on a Linux machine in which you plan to do your work. We recommend the desktop or home directory of your virtual machine. Then give the command

unix> tar xvf datalab-handout.tar.

This will cause a number of files to be unpacked in the directory. The only file you will be modifying and turning in is bits.c.

The bits.c file contains a skeleton for each of the programming puzzles. Your assignment is to complete each function skeleton using only straightline (no if/while/etc) code for the integer puzzles (i.e., no loops or conditionals) and a limited number of C arithmetic and logical operators. Specifically, you are only allowed to use the following eight operators:

! & | + << >>

A few of the functions further restrict this list. Also, you are not allowed to use any constants longer than 8 bits, but you can construct larger constants using 8 bit constants and operators. See the comments in bits.c for detailed rules and a discussion of the desired coding style.

4 The Puzzles

This section describes the puzzles that you will be solving in bits.c.

Some of the puzzle are bit manipulations (treating the data as a vector of bits), some are focused on twos complement artihmetic, teaching bits as numbers. There are some extra credit problems that treat the bits as floating point numbers.

Each problem has a Difficulty Rating and maximum number of operations. The Rating field gives the difficulty rating (the number of points) for the puzzle, and the Max ops field gives the maximum number of operators you are allowed to use to implement each function. See the comments in bits.c for more details on the desired behavior of the functions each one describes the intended semantics, the rating and the allowed number of operations. You may also refer to the test functions in tests.c. These are used as reference functions to express the correct behavior of your functions, although they dont satisfy the coding rules for your functions.

4.1 Floating-Point Operations

For Extra Credit, you can implement some common single-precision floating-point operations. In this section, you are allowed to use standard control structures (conditionals, loops), and you may use both int and unsigned data types, including arbitrary unsigned and integer constants. You may not use any unions, structs, or arrays. Most significantly, you may not use any floating point data types, operations, or constants. Instead, any floating-point operand will be passed to the function as having type unsigned, and any returned floating-point value will be of type unsigned. Your code should perform the bit manipulations that implement the specified floating point operations.

Table 1 describes a set of functions that operate on the bit-level representations of floating-point numbers. Refer to the comments in bits.c and the reference versions in tests.c for more information.

Name	Description	Rating	Max Ops
float_abs(uf)	Compute |f|	2	10
float_f2i(f)	Compute (int) f	4	30
float_half(uf)	Compute f/2	4	30

Table 1: Floating-Point Functions. Value f is the floating-point number having the same bit representation as the unsigned integer uf.

Functions float_abs and float_half must handle the full range of possible argument values, including not-a-number (NaN) and infinity. The IEEE standard does not specify precisely how to handle NaNs, and the IA32 behavior is a bit obscure. We will follow a convention that for any function returning a NaN value, it will return the one with bit representation 0x7FC00000.

The included program fshow helps you understand the structure of floating point numbers. To compile fshow, switch to the handout directory and type:

unix> make

You can use fshow to see what an arbitrary pattern represents as a floating-point number:

unix> ./fshow 2080374784

Floating point value 2.658455992e+36

Bit Representation 0x7c000000, sign = 0, exponent = f8, fraction = 000000 Normalized. 1.0000000000 X 2(121)

You can also give fshow hexadecimal and floating point values, and it will decipher their bit structure.

5 Evaluation

This section only includes evaluation for the standard section, not the extra credit.

The assignment is scored in two parts you will receive 40 percent of the overall score for having correctly functioning functions handed in on time and 60 percent for being able to correctly explain how your functions work in your interview grading section.

To compute the 40% for the correctness score, your correctness score will be computed out of a maximum of 53 points based on the following distribution:

29 of 53 points correct output

24 of 53 points not exceeding the maximum operations

Correctness points. The 12 puzzles you must solve have been given a difficulty rating between 1 and 4, such that their weighted sum totals to 29. We will evaluate your functions using the btest program, which is described in the next section. You will get full credit for a puzzle if it passes all of the tests performed by btest, and no credit otherwise.

Performance points. Our main concern at this point in the course is that you can get the right answer. However, we want to instill in you a sense of keeping things as short and simple as you can. Furthermore, some of the puzzles can be solved by brute force, but we want you to be more clever. Thus, for each function weve established a maximum number of operators that you are allowed to use for each function. This limit is very generous and is designed only to catch egregiously inefficient solutions. You will receive two points for each correct function that satisfies the operator limit.

Extra Credit

You can receive up to 10% extra credit (for the whole assignment) by completing all of the floating point problems. You will have to read ahead to learn about floating point, because were going to cover it later; however, youre going to have to learn it someday

Autograding your work

We have included some autograding tools in the handout directory btest, dlc, and driver.pl to help you check the correctness of your work.

Note that the autograding script produces a report about points this doesnt align with what weve described above (which is what holds). This happens in part because of the presence of the extra problems.

• btest: This program checks the functional correctness of the functions in bits.c. To build and use it, type the following two commands:

unix> make unix> ./btest

Notice that you must rebuild btest each time you modify your bits.c file.

Youll find it helpful to work through the functions one at a time, testing each one as you go. You can use the -f flag to instruct btest to test only a single function:

unix> ./btest -f bitOr

You can feed it specific function arguments using the option flags -1, -2, and -3:

unix> ./btest -f bitOr -1 7 -2 0xf

Check the file README for documentation on running the btest program.

• dlc: This is a modified version of an ANSI C compiler from the MIT CILK group that you can use to check for compliance with the coding rules for each puzzle. The typical usage is:

unix> ./dlc bits.c

The program runs silently unless it detects a problem, such as an illegal operator, too many operators, or non-straightline code in the integer puzzles. Running with the -e switch:

unix> ./dlc -e bits.c

causes dlc to print counts of the number of operators used by each function. Type ./dlc -help for a list of command line options.

• pl: This is a driver program that uses btest and dlc to compute the correctness and performance points for your solution. It takes no arguments:

unix> ./driver.pl

Your instructors will use driver.pl to evaluate your solution.

The default driver.pl script uses simple tests to check if your code is likely correct. A more comprehensive test is to involve driver.pl -b, which will use a BDD library to prove that your code handles all cases. This is what the TAs will use during interview grading, but this can be more time consuming. You should be fine just using driver.pl without the -b flag for testing.

6 Handin Instructions

Upload your bits.c file to the Moodle by the due date. You can upload your file multiple times, and we encourage you upload often so you dont run into problems at the last minute or lose your work.

7 Advice

• Dont include the <stdio.h> header file in your bits.c file, as it confuses dlc and results in some non-intuitive error messages. You will still be able to use printf in your bits.c file for debugging without including the <stdio.h> header, although gcc will print a warning that you can ignore.
• The dlc program enforces a stricter form of C declarations than is the case for C++ or that is enforced by gcc. In particular, any declaration must appear in a block (what you enclose in curly braces) before any statement that is not a declaration. For example, it will complain about the following code:

int foo(int x)

{

int a = x; a *= 3; /* Statement that is not a declaration */ int b = a; /* ERROR: Declaration not allowed here */ b *= a; // ERROR this comment style causes errors

}

8 The Beat the Prof Contest

For fun, were offering an optional Beat the Prof contest that allows you to compete with other students and the instructor to develop the most efficient puzzles. The goal is to solve each Data Lab puzzle using the fewest number of operators. Students who match or beat the instructors operator count for each puzzle are winners!

To submit your entry to the contest, type:

unix> ./driver.pl -u Your Nickname

Nicknames are limited to 35 characters and can contain alphanumerics, apostrophes, commas, periods, dashes, underscores, and ampersands. You can submit as often as you like. Your most recent submission will appear on a real-time scoreboard, identified only by your nickname. You can view the scoreboard by pointing your browser at

http://cs2400.cs.colorado.edu:8080