[SOLVED] Csci 5103 project 3: file systems

In this project, you will add features to an existing file system simulator. The file system simulator shows
the inner workings of a UNIX V7 file system. The simulator reads or creates a file which represents the
disk image, and keeps track of allocated and free blocks using a bit map.The File System Simulator is a collection of C++ classes which simulate the file system calls available in a
typical Unix-like operating system. The “Kernel” class contains methods (functions) like “creat()”, “open()”,
“read()”, “write()”, “close()”, etc., which read and write blocks in an underlying file in much the same way
that a real file system would read and write blocks on an underlying disk device.In addition to the “Kernel” class, there are a number of underlying classes to support the implementation
of the kernel. The classes FileSystem, IndexNode, DirectoryEntry, SuperBlock, Block, BitBlock,
FileDescriptor, and Stat contain all data structures and algorithms which implement the simulated file
system.Also included are a number of sample programs which can be used to operate on a simulated file system.
The programs “ls”, “cat”, “mkdir”, “mkfs”, etc., perform file system operations to list directories, display
files, create directories, and create (initialize) file systems. These programs illustrate the various file
system calls and allow the user to carry out various read and write operations on the simulated file
system.As mentioned above, there is a backing file for our simulated file system. A “dump” program is included
with the distribution so that you can examine this file, byte-by-byte. Any dump program may be used (e.g.,
the “od” program in Unix); we include this one which is simple to use and understand, and can be used
with any operating system.There are a number of ways you can use the simulator to get a better understanding of file systems. You
can
 use the provided utility programs (mkfs, mkdir, ls, cat, etc.) to perform operations on the
simulated file system and use the dump program to examine the underlying file and observe any
changes,
 examine the sample utility programs to see how they use the system call interface to perform file
operations,
 enhance the sample utility programs to provide additional functionality,
 write your own utility programs to extend the functionality of the simulated file system, and
 modify the underlying Kernel and other implementation classes to enhance the simulatorIn the sections which follow, you will learn what you need to know to perform each of these
activities. And in this project, you will do several of these.Using mkfs
The mkfs program creates a file system backing file. It does this by creating a file whose size is specified
by the block size and number of blocks given. It writes the superblock, the free list blocks, the inode
blocks, and the data blocks for a new file system. Note that it will overwrite any existing file of the name
specified, so be careful when you use this program.This program is similar to the “mkfs” program found in Unix-like operating systems.
The general format for the mkfs command is:
./mkfs file-name block-size blocks
where
file-name is the name of the backing file to create (e.g., filesys.dat). Note that this is the name of a
real file, not a file in simulator. This is the file that the simulator uses to simulate the disk device for the
simulated file system. This may be any valid file name in your operating system environment.
block-size is the block size to be used for the file system (e.g., 256). This should be a multiple of the
index node (i-node) size (usually 64) and the directory entry size (usually 16). Modern operating systems
usually use a size of 1024, or 512 bytes. We use 128 or 256 byte block sizes in many of our examples so
that you can quickly see what happens when directories grow beyond one block. This should be a
decimal number not less than 64, but less than 32768.blocks is the number of blocks to create in the file system(e.g., 40). This number includes any blocks that
may be used for the superblock, free list management, inodes, and data blocks. We use a relatively small
number here so that you can quickly see what happens if you run out of disk space. This can be any
decimal number greater than 3, but not greater than 224 – 1 (the maximum number of blocks), although
you may not have sufficient space to create a very large file.For example, the command:
./mkfs filesys.dat 256 40
will create (or overwrite) a file “filesys.dat” so that it contains 40 256-byte blocks for a total of 10240 bytes.
The output from the command should look something like this:
block_size: 256
blocks: 40
super_blocks: 1
free_list_blocks: 1
inode_blocks: 8
data_blocks: 30
block_total: 40From the output you can see that one block is needed for the superblock, one for free list management,
eight for index nodes, and the remaining 30 are available for data blocks.
Why is there 1 block for free list management? Note that 30 blocks require 30 bits in the free list bitmap.
Since 256 bytes/block * 8 bits/byte = 2048 bits/block, clearly one bitmap block is sufficient to track block
allocation for this file system.Why are there 8 blocks for index nodes? Note that 30 blocks could result in 30 inodes if many one-block
files or directories are created. Since each inode requires 64 bytes, only 4 will fit in a block. Therefore, 8
blocks are set aside for up to 32 inodes.NOTE: The other utilities assume that filesys.dat has been initialized using mkfs and is located in
the same directory as the utility’s binary. Using the other utilities without a properly initialized
filesys.dat will result in undefined behavior.The mkdir program can be used to create new directories in our simulated file system. It does this by
creating the file specified as a directory file, and then writing the directory entries for “.” and “..” to the
newly created file. Note that all directories leading to the new directory must already exist.
This program is similar to the “mkdir” command in Unix-like and MS-DOS-related operating systems.
The general format for the mkdir command is:
./mkdir directory-path
where
directory-path is the path of the directory to be created (e.g., “/root”, or “temp”, or “../home/jon/os/filesys”).
If directory-path does not begin with a “/”, then it is appended to the path name for working directory for
the default process.For example, the command:
./mkdir /home
creates a directory called “home” as a subdirectory of the root directory of the file system.
Similarly, the command:
./mkdir /home/jon
creates a directory called “jon” as a subdirectory of the “home” directory, which is presumed to already
exist as a subdirectory of the root directory of the file system.The ls program is used to list information about files and directories in our simulated file system. For
each file or directory name given it displays information about the files named, or in the case of
directories, for each file in the directories named.
This program is similar to the “ls” command in Unix-like operating systems.The general format for the ls command is:
./ls path-name …
where
path-name is a space-separated list of one or more file or directory path names.
For example, the command:
./ls /home
lists the contents of the “/home” directory. For each file in the directory, a line is printed showing the name
of the file or subdirectory, and other pertinent information such as size.
The output from the command should look something like this:
/home:
1 48 .
0 48 ..
2 32 jon
total files: 3In this case we see that the “/home” directory contains entries for “.”, “..”, and “jon”.The tee program reads from standard input and writes whatever is read to both standard output and the
named file. You can use this program to create files in our simulated file system with content created in
the operating system environment.This program is similar to the “tee” command found in many Unix-like operating systems.
The general format for the tee command is:
./tee file-path
where
file-path is the name of a file to be created in the simulated file system. If the named file already exists, it
will be overwritten.For example:
echo “howdy, podner” | ./tee /home/jon/hello.txt
causes the single line “howdy, podner” to be written to the file “/home/jon/hello.txt”.
The output from the command is:
howdy, podner
which you should note was the same as the input sent to the tee program by the “echo” command.
Note that the “|” (pipe) is almost always used with the tee program. Users of Unix-like operating systems
will find the “echo”, and “cat” commands useful to produce input for the pipe to tee..
If you wish to simply enter text directly to a file, then you may use tee directly (i.e., without the pipe).
Users of Unix-like operating systems will need to use CTRL-D to signal the end of input.The cp program allows you to copy the contents from one file to another in our simulated file system. If
the destination file already exists, it will be overwritten.
The general format of the “cp” command is:
./cp input-file-name output-file-name
where
input-file-name is the path-name for the file to be copied (i.e., the source file, and
output-file-name is the path-name for the file to be created (i.e., the target file.
For example:
./cp /home/jon/hello.txt /home/jon/greeting.txt
creates a new file “/home/jon/greeting.txt” by copying to it the contents of file “/home/jon/hello.txt”.The cat program reads the contents of a named file and writes it to standard output. The cat program is
generally used to display the contents of a file.
The general format of the cat command line is:
./cat file-name
where
file-name is the name of the file from which data are to be read for writing to standard output.
For example:
./cat /home/jon/greeting.txt
causes the file “/home/jon/greeting.txt” to be read, the contents of which are written to standard output.
In this case, the output from the program might look something like this:
howdy, podnerWhile you are working with the file system simulator, you may wish to dump the contents of the backing
file to see if it contains what you think it contains. The dump program shows the contents of a file in the
operating environment, one byte at a time, in various formats (hexadecimal, decimal, ASCII).
Note that dump dumps the contents of a real file, not a file in our simulated file system.
The general format of the dump command line is
./dump file-name
where
file-name
is the name of the file to be dumped. This should generally be the name of the backing file for the file
system simulator (e.g., “filesys.dat”).The general format of the dump output is
addr hex dec asc
where
addr is the decimal address of the byte,
hex is the hexadecimal value of the byte,
dec is the decimal value of the byte, and
asc is the corresponding ASCII character if the value is between 33 and 127 (decimal).
Each line of dump output corresponds to a single byte in the file. To keep the listing brief, dump only
displays non-zero bytes from the input file.
For example
./dump filesys.dat | more
causes the contents of the file “filesys.dat” to be displayed, one line per byte. The “| more” causes you to
be prompted for each page of the output.The first page of the output should look something like this:
0 1 1
5 28 40 (
9 1 1
13 2 2
17 a 10
256 1f 31
512 40 64 @
515 3 3
523 30 48 0
527 ff 255
528 ff 255
529 ff 255
530 ff 255
531 ff 255
532 ff 255
533 ff 255
534 ff 255
535 ff 255
536 ff 255
537 ff 255
538 ff 255
539 ff 255
540 ff 255
541 ff 255You should notice, for example, that the first block (the super block) contains a few numeric values
corresponding to the block size (the 1 in the 0 byte means 256), number of blocks, etc. The second block
(starting at byte 256) contains a few bits that are set, indicating that the first few blocks are allocated. The
third block (starting at 512) contains a few index nodes; the FF/255 values indicate that a direct block is
unallocated. A little further down you will see “.”, and “..” for the directory entries for the root file system,
and other data blocks. Writing programs that use the File System Simulator requires the use of the Kernel class, and may
involve the use of the classes Stat and DirectoryEntry. Each file system simulator program must
call Kernel.initialize() before calling any of the other Kernel methods. If you’re writing ordinary
programs that use the standard file system calls, you should not need to reference any other classes.
These three classes are described briefly here.sets up the simulator environment and defines all the system calls. This class defines: the
method initialize(), which is used to initialize the file system simulator;
the creat(), open(),read(), write(), close(), and other methods which simulate the work of a
file system; and constants like EBADF, S_IFDIR, and O_RDONLY which are used to represent parameter
or return values for the system calls. All the methods and fields of Kernel are static; you do not instantiate
a Kernel object. For examples, see any of the sample programs (i.e., cat.cc, cp.cc, ls.cc, etc.)
Stat
is a data structure that represents information about a file or directory. This intends to faithfully represent
the Unix stat struct. You may reference fields within a stat object directly (e.g.,stat.st_ino), or using
accessor/mutator methods (e.g., stat.getIno() or stat.setIno(). Stat objects are updated by the
methods Kernel.stat() and Kernel.fstat(). For examples, see mkdir.cc.DirectoryEntry is a data structure that represents a single record in a directory file. This intends to faithfully represent a
Unix dirent struct. It contains an index node number and a file name. You may reference the fields
directly (e.g., dirent.d_ino), or using accessor/mutator methods
(e.g., dirent.getIno() or dirent.setIno()).DirectoryEntry objects are updated by the
method Kernel.readdir(). For examples, see mkdir.cc and ls.cc.
For more information about Unix system calls and the stat and dirent structs, refer to a Unix system
manual. Users of Unix-like systems may find the commands “man -S 2 creat”, “man -S 2 open”,
etc. to be helpful.All programs that use the File System Simulator should adhere to the following guidelines:
 Invoke the method Kernel.initialize() before any other File System Simulator calls.
 Use Kernel.exit() when you wish to terminate processing in your program.
 Check for errors after each system call (e.g., creat(), open(), read(), write(), etc.).
Nearly all the system calls return -1 if an error occurs.
 Use Kernel.perror() to print the message associated with an error.
 Use Kernel.getErrno() to determine which error occurred, if needed. Note that in standard Unix
programs you would reference the static process variable “errno”.
For examples, take a look at the following sample programs in the distribution:
 cat.cc
 cp.cc
 ls.cc
 mkdir.cc
 tee.cc
Collectively, these sample programs invoke all of the core methods (system calls) of the file system
simulator.The following are the internal classes for the file system simulator:
BitBlock
is a data structure that views a device block as a sequence of bits. The
methods setBit(), resetBit(), and isBitSet() are used to set, reset, or check a bit in the block.
This structure is used to implement bitmaps, and is used by the file system simulator to track allocated
and free data blocks in the file system. BitBlock extends Block.
Block
is a data structure that views a device block as a sequence of bytes. The field bytes is an array of byte,
and is directly accessible. Included are methods to read() and write() the block to
aRandomAccessFile, which simulate the action of reading or writing a device block.FileDescriptor
is a structure and collection of methods that represent an open file. It includes a number
of get and set methods for various tidbits of information about the open file, and
provides readBlock andwriteBlock() methods for reading and writing the blocks of the file.
FileSystem
is a structure and collection of methods that represent an open (mounted) file system. It includes a
few get and set methods for various fields about the file system, but more importantly, includes
methods to open() the file behind the file system, to read() and write() blocks of the device, to
manage blocks (allocateBlock() and freeBlock()) and to manage inodes
(allocateIndexNode()). In general, Kernel methods should call FileSystem methods when they
want to read or write data in the file system.IndexNode
is a structure and collection of methods for representing an index node. This is meant to reflect the exact
structure on disk for an index node. It includes get and set methods for each of the fields in the index
node. Also included are read() and write() methods which are used to copy data to and from byte
arrays (not disk files).ProcessContext
is a structure and collection of methods to represent a process. This is where the simulator stores the uid,
gid, umask, dir, and other information for the current process. It includes get and setmethods for each
of the fields in a process.
SuperBlock
is a structure and collection of methods for representing the superblock on the disk. In our
implementation, the superblock contains information about the block size, number of blocks, offsets to the
first block of the free list, inode block, and data block areas of the device. It
includes get and set methods for each of the fields in the superblock. Also included are methods
to read() and write() the superblock.Study the code and utilities to gain a basic understanding of the file system code, before adding the
features described below.1. Enhance the file system simulator to include a new method, Kernel.link(), which, given two
path names, creates the second path as a (hard) link to the first path. link() should find the
inode number for the first file, and then write a directory entry for the second path which
references the same index node. Don’t forget to increment nlink on the index node. To test your
new method, write a new program, ln.cc, which, given two path names, performs
the link() operation. Assume that creating a link to a directory is not allowed.2. Enhance the file system simulator to include a new method, Kernel.unlink(), which, given
the name of a file, removes the directory entry for that file and decrements nlink for the index
node. If nlink is decremented to zero, free all the blocks of the file. If the file is currently open by
any process, mark the file so that the blocks will be freed when the file is closed by the last
process. To test your new method, write a new program rm.cc which accept the names of files
to be unlinked. Assume that unlinking a directory is not allowed.3. Enhance the file system simulator to support indirect blocks, and double- and triple-indirect
blocks.4. Write a program called fsck.cc which checks a file system for internal consistency. It should
verify that all the inodes mentioned in directory entries have the correct number of nlinks, and that
all blocks mentioned in the inodes are marked as allocated blocks, and all blocks NOT mentioned
in the inodes are marked as free blocks. At a minimum you should list any problems to standard
out. For simplicity, you can check only direct blocks.Repair the errors during an fsck. Decide on a reasonable fix, and then ask the end-user to
authorize your repair. Also – check all blocks (at all levels of indirection).1. Repair the errors during an fsck. Decide on a reasonable fix, and then ask the end-user to
authorize your repair. Also – check all blocks (at all levels of indirection).
2. Write a program find.cc which, given a path name, checks to see if the path exists, and if so
lists that path name and all files in all directories (and sub-directories, and sub-sub-directories,
etc.) under it, one path name per line. For example, ./find /home might produce the following
output:
/home
/home/foo
/home/foo/bar.txt
/home/foo/foo.txt
/home/jon
/home/jon/homer
/home/jon/homer/odyssey.txt
/home/jon/homer/iliad.txt
/home/jon/virgil
/home/jon/virgil/aeneid.txt
/home/jon/virgil/eclogues.txt
/home/jon/virgil/georgics.txt
under the right circumstances, of course. Hint: Your program may include a recursive method or
an array for keeping track of each directory as you open it. What is the maximum directory tree
depth to which your program will work?
3. Implement symbolic links.
You must completely implement a feature to gain extra credit. Zip up/Tar your code and submit it online.
 Projects MUST include a readme.txt file in your assignment which has the following information:
o Your names;
o Your student IDs;
o How to build your program (ideally via “make” or “make all”)
o How to run your program;
 No need to submit a paper copy. Save trees instead.