[SOLVED] Csc369 assignment 1: system calls

Step 0: Log into MarkUs (https://markus.teach.cs.toronto.edu/csc369­2018­09/) using your UTORID and
your teach.cs password.
In this assignment, you will achieve the goal of hijacking (intercepting) system calls by writing and installing
a very basic kernel module to the Linux kernel.Here is what “hijacking (intercepting) a system call” means. You will implement a new system call named
my_syscall , which will allow you to send commands from userspace, to intercept another pre­existing
system call (like read, write, open, etc.).After a system call is intercepted, the intercepted system call logs a
message first before continuing performing what it was supposed to do.For example, if we call my_syscall with command REQUEST_SYSCALL_INTERCEPT and target system call number
__NR_mkdir (which is the macro representing the system call mkdir ) as parameters, then, when another
process calls mkdir , mkdir would log some message (e.g., “muhahaha”) first, then perform what it was
supposed to do (i.e., make a directory).But wait, that’s not the whole story yet. We only want mkdir to log a message when a certain set of
processes (PIDs) are calling mkdir . In other words, we want to monitor a set of PIDs for the system call
mkdir . Therefore, you will need to keep track, for each intercepted system call, of the list of monitored PIDs.Our new system call will support two additional commands to add/remove PIDs to/from the list.
When we want to stop hijacking a system call (let’s say mkdir but it can be any of the previously hijacked
system calls), we can invoke the interceptor ( my_syscall ), with a REQUEST_SYSCALL_RELEASE command as an
argument and the system call number that we want to release.This will stop intercepting the target system
call mkdir , and the behaviour of mkdir should go back to normal like nothing happened.Checklist
First of all, DO NOT MANUALLY CREATE A NEW DIRECTORY ‘A1’ IN YOUR REPOSITORY! An empty
directory called ‘A1’ should be created for you automatically when you log into MarkUs and go on your A1
link.Next, you should see the newly­created ‘A1’ directory in your repository. Please make sure in advance
that you can access your A1 directory, to avoid last­minute surprises.Here is a checklist that should help get you started, and to make sure that you won’t forget the important
things:1. Find your GIT repository on MarkUs (see “Submission”), and make sure you can access it. The starter
code files can be found on the teaching lab machines (either the servers or workstations), under
https://q.utoronto.ca/courses/51193/assignments/40242 2/10
/u/csc369h/fall/pub/a1­starter/starter_code.tgz2. Test that you have access to the VM in the teaching labs (instructions below).
3. Download the disk image for the virtual machine here (gzipped)
(http://www.cs.toronto.edu/~bogdan/stuff/UbuntuServer­CSC369­A1VM­student.zip) .
On the host computer (your laptop or a lab computer), use a virtual machine software (VirtualBox
(https://www.virtualbox.org) or VMware) to create a virtual machine using the the disk image you
downloaded (instructions to follow below).4. Read and understand the existing code in the starter code. This is an important step of this assignment,
and you should not start writing your own code before you have a good understanding of the starter
code.5. Implement the new kernel module by completing source file “interceptor.c”. Sections that need to be
completed are marked with the TODO tag). Do NOT modify the header file “interceptor.h”.
6. Make sure to test as you go. You should first make sure that the commands to intercept and de­intercept
work well, before attempting to implement the monitoring commands.7. Testing and debugging (must be done in the virtual machine):
a. Check out your code inside the virtual machine.
b. Type make to compile your kernel module. Make sure there is no error or warning.
c. Implement the intercept and release commands.
d. Compile the test_intercept.c program using gcc.e. Test your code using sudo ./test_intercept , and make sure that all tests pass.
f. Implement the monitoring/un­monitoring commands.
g. Compile the test_full.c program using gcc.
h. Test your code using sudo ./test_full , and make sure that all tests pass.8. Submit your code on time. See “Submission” for more details.9. Congratulations! You now have some great hands­on experience with the Linux kernel! You can now be
proud of having programmed a Linux kernel module. You know what else are commonly implemented as
kernel modules? Device drivers! Although they are more complex, you now technically have the basis to
try to write one. Isn’t that cool?The goal of this assignment is to learn more about system calls and to use synchronization mechanisms.
For this assignment you will be writing a very basic kernel module that intercepts system calls and monitors
processes on demand.In order to be able to issue our own hijacking commands from userspace, we need a new system call that
takes as parameters the command, the system call number (to be intercepted), and (for monitoring) a pid.Instead of adding a new system call, which can be tricky, our new system call my_syscall will be installed in
place of an unused system call in the system call table. We will connect my_syscall to the entry numberhttps://q.utoronto.ca/courses/51193/assignments/40242 3/10
MY_CUSTOM_SYSCALL (in effect, entry 0 which is mostly unused). The new system call my_syscall,
defined as follows:
int my_syscall(int cmd, int syscall, int pid);will serve as an interceptor and will receive the following commands from userspace:
a. REQUEST_SYSCALL_INTERCEPT: intercept the system call syscall
b. REQUEST_SYSCALL_RELEASE: de­intercept the system call syscall
c. REQUEST_START_MONITORING: start monitoring process pid for system call syscall , i.e., add pid
to the syscall ‘s list of monitored PIDs. A special case is that if pid is 0 then all processes are
monitored for syscall , but only root has the permission to issue this command (see the comments for
my_syscall in the starter code for more details).d. REQUEST_STOP_MONITORING: stop monitoring process pid for system call syscall , i.e., remove
pid from the syscall ‘s list of monitored PIDs.Your kernel module must, upon initialization, replace the system call table entry for the
MY_CUSTOM_SYSCALL number, with the my_syscall function. When the module is released, it must
restore this system call to its original routine.As a result, when your kernel module is loaded, any subsequent invocations of the system call number
MY_CUSTOM_SYSCALL from userspace, will issue four types of commands, to intercept or release a given
system call, and to start and stop monitoring a pid for a specific syscall. You must implement the my_syscall
function accordingly.1. REQUEST_SYSCALL_INTERCEPT and REQUEST_SYSCALL_RELEASE.
When an intercept command is issued, the corresponding entry in the system call table will be replaced with
a generic interceptor function (discussed later) and the original system call will be saved. When a
REQUEST_SYSCALL_RELEASE command is issued, the original saved system call is restored in the
system call table in its corresponding position.2. REQUEST_START_MONITORING and REQUEST_STOP_MONITORING
Monitoring a process consists of the module logging into userspace some information about the process and
the system call: the system call number, the parameters of the system call, and the pid of the process.When a REQUEST_START_MONITORING command comes through our custom system call, the kernel
module must record internally that the pid passed as a parameter should be monitored for the syscall
number (passed as a parameter as well). The monitoring can be done for a specific pid, or for all pids (in
which case the pid parameter for my_syscall will be 0).Ok, but I still don’t understand, what does it mean to monitor a pid? And what does the generic interceptor
function do?Let’s start with the monitoring. We have established that once the user issues a monitoring command, the
kernel module records internally that pid should be monitored whenever it issues system call numberhttps://q.utoronto.ca/courses/51193/assignments/40242 4/10
syscall (it will be placed in a monitored list ­ see details in starter code).We have also established that the generic interceptor function is what each intercepted system call will
reach. In other words, whenever we reach the generic interceptor, we know that the system call is being
intercepted (otherwise we would not reach this). If the pid of the process issuing the system call is being
monitored, that means that we must print some information to a log. The log message will simply contain the
system call number and the arguments, as well as the calling process’s pid.We have provided you in the starter code with a log_message macro, which takes care of sending a
message to the system log. You can check the log using the dmesg command.As you might expect, regardless if a pid is monitored or not, the generic interceptor must eventually (once it’s
done logging, if applicable), call the original system call to allow normal operation of all processes in the
system.
Alright, but what if a process exits before the user can issue a system call to stop monitoring it?Good question! When your kernel module initializes, you should also hijack the exit_group system call (with
number __NR_exit_group), by replacing it in the system call table with your own custom function
my_exit_group . Of course, make sure to save the original exit_group function, and to restore it when your
kernel module is unloaded.Implementing the my_exit_group function should be simple: all you have to do is to remove the pid of the
exiting process from all kernel module’s internal bookkeeping on monitored processes, then call the original
exit_group function.Error Condions
You must make sure to check any possible misuse of the commands. In case of a misuse, you should return
a proper error code (e.g., -EINVAL , -EPERM , google “Linux error code” for more information on error codes).Here is a list of things you should keep in mind:
A. For each of the commands, check that the arguments are valid (­EINVAL):
The syscall number must be valid: not negative, not > NR_syscalls­1 (the last syscall number in the
table), and not MY_CUSTOM_SYSCALL itself (for obvious reasons).The pid must be valid for the monitoring commands. It cannot be a negative integer, and it must be
an existing pid (except for the case when it’s 0, indicating that we want to start/stop monitoring for all
pids).
If a pid belongs to a valid process, then the following call is not NULL:
pid_task(find_vpid(pid), PIDTYPE_PID)
B. Check that the called has the right permissions (­EPERM):
For the first two commands, we must be root (see the current_uid() macro), to be able to intercept or
release system calls.For the last two commands, the following logic applies:
Is the calling process root? if so, all is good, no doubts about permissions.
If it is not, then check if the pid requested is owned by the calling processhttps://q.utoronto.ca/courses/51193/assignments/40242 5/10
Also, if pid is 0 and the calling process is not root, then access is denied (monitoring all pids
should only be allowed for a superuser, for obvious reasons).C. Check for correct context of commands (­EINVAL):
Cannot de­intercept a system call that has not been intercepted yet.
Cannot stop monitoring for a pid that is not being monitored, or if the system call has not been
intercepted yet. If the system call has not been intercepted yet, a command to start monitoring a pid
for that syscall is also invalid.D. Check for ­EBUSY conditions:
If intercepting a system call that is already intercepted.
If monitoring a pid that is already being monitored.
E. If a pid cannot be added to a monitored list, due to no memory being available, an ­ENOMEM error code
should be returned.The starter code provides a set of functions that enable operation with kernel lists.
What if a stop monitoring request comes in for a specific PID (let’s call it P), for a syscall that monitors all
PIDs? Is that an error or should we treat this as a special case? For this assignment, you can assume that
this is an error and simply return ­EINVAL.BONUS (5% applicable to marks lost elsewhere on this assignment): Instead of ignoring this case and
returning ­EINVAL, you can optionally treat this as a special case. If we already monitor all PIDs for a
syscall, then you might have to think of a solution to make sure that you can keep monitoring all the PIDs in
the system, except for P.Please keep in mind that some processes that will be monitored may not have
even started their execution. Also, please keep in mind that we might have other stop monitoring requests
for the same syscall, in which case, you might have to think of how to use the list of monitored pids in a
smart way. One possibility is turning the list of monitored pids into a “blacklist” (keeping track of the pids that
are not being monitored).General informaon
1. You must use the starter code provided, which gives you detailed instructions on what you need to
implement. Please make sure to implement all the parts indicated using detailed TODO comments.
Please make sure to first attend the tutorial which will help you write a simple kernel module and show
you how to use printk statements for debugging. See the tutorial notes as well.2. Your assignment will be tested on a virtual machine on CDF (aka teaching labs). You can access this
virtual machine from your teaching labs account, or you can download the provided virtual machine disk
image and install it on your personal computer through a virtualization solution (for example, free
software include VMWare Player, VirtualBox, etc.)3. We strongly recommend that you do NOT use the virtual machine for development, but rather only for
testing and debugging. While working on this assignment, it is quite likely you will crash the kernel and
although you can kill and restart the VM, there will be no guarantee that your code will still be there (the
VM tools on the teaching labs won’t guarantee you safe snapshots).To prevent your hard work from
possible data corruption, either git clone inside the VM and use your repository to commit+push your
code periodically from within the VM, or make sure to at least back up your code periodically (e.g., by
scp­ing it back to your teaching labs account).https://q.utoronto.ca/courses/51193/assignments/40242 6/10
Accessing the Virtual Machine on the teaching labs
Guidelines for accessing the VM on the teaching labs can be found in the file:
VirtualMachineInstructions.txt . Please make sure to follow the instructions carefully.Setup VM On Your Own Machine
Note: Your assignment has to ultimately be tested on a teaching lab machine. However, if you wish to
develop it and test it first on your own machine, using virtualization software (*do not test your assignment
directly on your computer!*), then we will provide some basic instructions on how to do so.Since VirtualBox
is one of the most portable (as well as free) virtualization software, here(VirtualBox Instructions) and here
(http://www.cs.toronto.edu/~dbkats/csc369­virtualbox­instructions.html) are some basic guidelines on how
to install the VM image in VirtualBox on your computer (of course, many tutorials can be found online as
well, so feel free to consult other sources if something does not work well for your own machine).Implementaon details
1. Since the number of system calls is rather small (~300), and for performance reasons, you must maintain
the system call information in an array. Each array element will contain information, as described in the
mytable struct:
typedef struct {
asmlinkage long (*f)(struct pt_regs);
int intercepted;
int monitored;
int listcount;
struct list_head my_list;
} mytable;2. You must use a linked list for storing information about the monitored processes; using an array of fixed
size is entirely inadequate (because the search time will be the same as a linked list, the implementation
complexity will be the same, but the size of the array will limit the number of entries).3. The system call table is exported by the void* sys_call_table[NR_syscalls], present in one of the kernel
source files from the VM image on the teaching labs. If you wish to configure your own kernel image and
re­compile it, you can modify the source code by adding the following two lines in the /usr/src/linuxsource-2.6.32/arch/x86/kernel/i386_ksyms_32.c file:
extern void* sys_call_table[];
EXPORT_SYMBOL(sys_call_table);
then recompile the kernel. Again, our virtual machine image already has these changes in place.4. Since the 2.6 kernel is preemptive, you must protect access to shared data. You will be using spinlocks
for this purpose. The use of spinlocks is fairly simple and you have been shown some examples in one
of the tutorials.5. You must use the system call number 0 for MY_CUSTOM_SYSCALL. Do not attempt to use a different
existing system call number, as that may result in the kernel misbehaving (to say the least). Rememberhttps://q.utoronto.ca/courses/51193/assignments/40242 7/10
that lots of services running in your OS make use of these system calls.6. Logging the system call will be done using the log_message macro, defined in the interceptor.h header
file.7. For testing, you can use the provided tester programs. After you compile a test program (the provided
Makefile only compiles your interceptor module, not any tester!), remember to run the tester using sudo
privileges in the VM.To facilitate your testing, you should first try to implement the commands to intercept and release system
calls. When you are ready to test these, use the test_intercept.c tester.Once all tests pass, you can proceed to implementing the monitoring commands. To test all commands
(both related to intercepting and to monitoring), you can use the test_full.c tester.Tesng your code
To help you test your code, we have provided two testers, which you will also find in your repositories.To
encourage you to test as you go, we are providing you with two testers:
test_intercept.c ­ tests if your intercept and de­intercept commands work correctly. You should first
implement these and make sure the tester passes all cases.test_full.c ­ tests if all commands (including intercept, release, and both monitoring commands) work
properly. This is a superset of the first tester, and you should only use once your code passes the first
tester.The tester loads your module and tests some basic functionality. It is by no means a comprehensive tool to
ensure your code works for every corner case. To ensure that your code works correctly in all possible
scenarios, you should add more test cases by modifying the testers (see code comments in main).However,
please do not submit your own tester files, because they will not be marked. The tester will also not catch
synchronization bugs, except for blatant deadlocks. It is your responsibility to ensure that your code is not
likely to run into synchonization problems.Finally, when testing, you will likely see the tester crash on
various tests, due to bugs in your module. During your debugging, please feel free to go in each tester, and
comment out some of the system calls being tested, if you wish to debug each test case in isolation.Other Useful Tips
Again, run tests ONLY in the virtual machine, NOT native computer, unless you hate your laptop.
Once more, we strongly recommend that you do NOT use the virtual machine for development, but
rather only for testing and debugging. Since it is quite likely you will crash the kernel and there will be no
guarantee that your code will be intact. To prevent your hard work from possible data corruption, either
git clone inside the VM and commit+push your code periodically, or make sure to at least back up your
code periodically.
Reading and understanding code is as important as (if not more important than) writing code.
The comments in the starter code have a lot of information, make sure to read them carefully.
Remember that when we de­intercept a syscall, the original system call must be restored in the system
call table. For that you must properly store the original system call before replacing it.https://q.utoronto.ca/courses/51193/assignments/40242 8/10
For debugging, learn how to use the printk function, which prints messages to kernel log. See tutorial
notes as well.
Use dmesg command to check the kernel log.Submission
You will submit the interceptor.c file that contains your implementation, along with the files required to
build your program (including the provided interceptor.h , Makefile , and Kbuild , which you should not
modify). Do not submit executables, or tester files!For those working in pairs, please make sure to commit to the group repository. If you previously had trouble
forming groups on A0, please contact me in advance. Do not leave this to the last minute, technical trouble
with your repository will not get you an extension!Additionally, you must submit an INFO.txt file, which contains as the first 3 lines the following:
your name
your UtorID(s)
the git commit hash for your last submission. As a general rule, we will always take the last revision
before the deadline (or after, if you decide to use grace tokens), so this is simply a sanity check for us
that we did not miss a revision when we retrieve your code via MarkUs.
Aside from this, please feel free to describe problems you’ve encountered, what isn’t fully implemented (or
doesn’t work fully), any special design decisions you’ve taken, etc.Finally, whether you work individually or in pairs with a partner, you must submit a plagiarism.txt file, with
the following statement:
“All members of this group reviewed all the code being submitted and have a good understanding of it.All
members of this group declare that no code other than their own has been submitted. We both acknowledge
that not understanding our own work will result in a zero on this assignment, and that if the code is detected
to be plagiarised, severe academic penalties will be applied when the case is brought forward to the Dean of
Arts and Science.”Make sure your code compiles without any errors or warnings.
Code that does not compile will receive zero marks!Marking scheme
We will be marking based on correctness (90%), and coding style (10%). Make sure to write legible code,
properly indented, and to include comments where appropriate (excessive comments are just as bad as not
providing enough comments). Code structure and clarity will be marked strictly!
Additionally, you must submit an INFO.txt file, which contains as the first 3 lines the following:
your name
your UtorID(s)https://q.utoronto.ca/courses/51193/assignments/40242 9/10
the git commit hash for your last submission. As a general rule, we will always take the last revision
before the deadline (or after, if you decide to use grace tokens), so this is simply a sanity check for us
that we did not miss a revision when we retrieve your code via MarkUs.Aside from this, please feel free to describe problems you’ve encountered, what isn’t fully implemented (or
doesn’t work fully), any special design decisions you’ve taken, etc.Finally, whether you work individually or in pairs with a partner, you must submit a plagiarism.txt file, with
the following statement:
“All members of this group reviewed all the code being submitted and have a good understanding of it.All
members of this group declare that no code other than their own has been submitted. We both acknowledge
that not understanding our own work will result in a zero on this assignment, and that if the code is detected
to be plagiarised, severe academic penalties will be applied when the case is brought forward to the Dean of
Arts and Science.”Make sure your code compiles without any errors or warnings.
Code that does not compile will receive zero marks!Marking scheme
We will be marking based on correctness (90%), and coding style (10%). Make sure to write legible code,
properly indented, and to include comments where appropriate (excessive comments are just as bad as not
providing enough comments). Code structure and clarity will be marked strictly!More details on the marking scheme:
Correctness ­ init/exit module: 10% (correct functionality of init/exit_module)
Correctness ­ exit_group: 5%
Correctness ­ interceptor: 5%
Correctness ­ my_syscall: 60% (each of the four operations are worth 15 marks: 8 for functionality, 7 for
checking validity of arguments, special conditions, etc.)
Synchronization: 10% (Correct use of synchronization primitives. Even if code does not deadlock or
cause race conditions during testing, if the code looks like it has the potential to do so, marks will be
deducted accordingly.)
Code style and organization: 10% ­ code design/organization (modularity, code readability, reasonable
variable names, avoid code duplication, appropriate comments where necessary, proper indentation and
spacing, etc.)Negative deductions (please be careful about these!):
Code does not compile ­100% for *any* mistake, for example: missing source file necessary for
building your code (including Kbuild, Makefile, provided source files, etc.), typos, any compilation
error, etc. (If it is a straightforward fix like a missing file, then you may request a remark with a 20%
penalty.)
No plagiarism.txt file: ­100% (we will assume that your code is plagiarised, if this file is missing)https://q.utoronto.ca/courses/51193/assignments/40242 10/10
Missing or incorrect INFO.txt: ­10%
Warnings: ­10%
Extra output (other than the function that logs messages): ­20%
Code placed in subdirectories: ­20% (only place your code directly under your A1 directory)