[SOLVED] Cs 211: programming assignment 1: introduction to c

The first part requires you to write a program that checks whether a number is prime or not. A
number is prime if it is divisible only by 1 and that number.Input and output format: This program takes an integer argument from the command line.
It prints “yes” if the number is prime, “no” if the number is not prime, and “error” if no input is
given. You can assume the input will be a proper integer (> 0). Thus, it will not contain ‘.’ or any
letters. The command prompt in the examples below is indicated by ’$’.Example Execution:
$./first 10
no
$./first 7
yes
$./first
errorIn the second part, you have to implement a linked list that maintains a list of integers in sorted
order. Thus, if the list contains 2, 5 and 8, then 1 will be inserted at the start of the list, 3 will be
inserted between 2 and 5 and 10 will be inserted at the end.
Input format: This program takes a file name as an argument from the command line. The file
is either blank or contains successive lines of input. Each line contains a character, either ‘i’ or
1
‘d’, followed by a tab character and then an integer. For each of the lines that starts with ‘i’, your
program should insert that number in the linked list in sorted order if it is not already there. Your
program should not insert any duplicate values. If the line starts with a ‘d’, your program should
delete the value if it is present in the linked list. Your program should silently ignore the line if the
requested value is not present in the linked list.Output format: At the end of the execution, your program should print all the values of the
linked list in sorted order. The values should be in a single line separated by tabs. There should be
no leading or trailing white spaces in the output. Your program should print “error” (and nothing
else) if the file does not exist or it contains lines with improper structure. Your program should
print a blank line if the input file is empty or the resulting linked list has no nodes.Example Execution:
Lets assume we have 3 text files with the following contents:
“file1.txt” is empty
file2.txt:
i 10
i 12
d 10
i 5
file3.txt:
d 7
i 10
i 5
i 10
d 10
Then the result will be:
$./second file1.txt
$./second file2.txt
5 12
$./second file3.txt
5
$./second file4.txt
errorIn this part, you will implement a hash table containing integers. The hash table has 10,000
buckets. An important part of a hash table is collision resolution. In this assignment, we want you
to use chaining with a linked list to handle a collision. This means that if there is a collision at
a particular bucket then you will maintain a linked list of all values stored at that bucket. More
2
information about chaining can be found at http://research.cs.vt.edu/AVresearch/hashing/
openhash.php.
For this problem, you have to use following hash function: key modulo the number of buckets.
Input format: This program takes a file name as argument from the command line. The file is
either blank or contains successive lines of input. Each line contains a character, either ‘i’ or ‘s’,
followed by a tab and then an integer, the same format as in the Second Part. For each of the lines
that starts with ‘i’, your program should insert that number in the hash table if it is not present.
If the line starts with a ‘s’, your program should search the hash table for that value.
Output format: For each line in the input file, your program should print the status/result
of that operation. For an insert, the program should print “inserted” if the value is inserted or
“duplicate” if the value is already present. For a search, the program should print ”present” or
“absent” based on the outcome of the search. Your program should print “error” (and nothing
else) if the file does not exist. The program should also print “error” for input lines with improper
structure.
Example Execution:
Lets assume we have 2 text files with the following contents:
“file1.txt” is empty
file2.txt:
i 10
i 12
s 10
c 5
i 10
s 5 The the results will be:
$./third file1.txt
$./third file2.txt
inserted
inserted
present
error
duplicate
absent
$./third file3.txt
error
Fourth: Matrix addition (15 points)
The fourth part requires you to add 2 matrices. The matrices need to have same dimensions (number
of rows and columns) for the addition to be valid. The output will be of the same dimensions as
3
well.
Input and output format: This program takes a file name as argument from the command
line. The first line of the file will contain two numbers seperated by a tab, m and n, where m is the
number of rows and n is the number of columns. This will be followed by the m lines of first matrix
followed by a blank line and second matrix, also on m lines. Each row will have n tab-seperated
values. You can assume the input will be properly structured for this part of the assignment. The
program should output the result matrix in m lines. Each line will contain n tab-seperated values.
Example Execution:
Lets assume we have a text file, file1.txt, with the following contents:
file1.txt:
3 3
1 1 1
1 1 1
1 1 1
1 1 1
1 1 1
1 1 1
Then the output will be:
$./fourth file1.txt
2 2 2
2 2 2
2 2 2
Fifth:Matrix multiplication (15 points)
The fifth part requires you to multiply 2 matrices. The matrices need to have consistent dimensions
(number of rows and columns) for a valid multiplication: the number of columns of the first matrix
must be equal to number of rows in the second.
Input and output formats: This program takes a file name as an argument from the command
line. The first line of the file will contain 2 tab-seperated numbers, m1 and n1, where m1 is the
number of rows in the first matrix and n1 is the number of columns in the first matrix. This will be
followed by the m1 lines of first matrix, containing n1 tab-seperated values, followed by a blank line,
then 2 tab-seperated numbers, m2 and n2, where m2 is the number of rows in the second matrix
and n2 is the number of columns in the second matrix. Again, this is followed by the m2 lines of
the second matrix. Each row will contain n2 tab-seperated values, the same as the first matrix.
You can assume the input will be properly structured for this part of the assignment. The program
should output the resulting matrix in m1 lines. Each line will again contain n2 tab-seperated values.
Lets assume we have ”file1.txt”:
3 2
4
2 2
2 2
2 2
2 3
1 1 1
1 1 1
The the output will be:
$./seventh file1.txt
4 4 4
4 4 4
4 4 4
Sixth: String Operations (5 points)
The sixth part requires you to read an input string representing a sentence, generate an acronym
from the first letters of the words, and print it out. The letters of the acronym are the same case
as their respective words in the input sentence.
Input and output format: This program takes a string of space-sperated words, and should output
the acronym as a single word.
$./sixth Hello World!
HW
$./sixth Welcome to CS211
WtC
$./sixth Rutgers Scarlet Knights
RSK
Seventh: String Operations II (5 points)
The seventh part requires you to read an input string representing a sentence, form a word whose
letters are the last letters or punctuation of the words in the given sentence, and print it.
Input and output format: This program takes a string of space-seperated words, and should output
a single word as the output.
$./seventh Hello World!
o!
$./seventh Welcome to CS211
eo1
$./seventh Rutgers Scarlet Knights
sts
5
Eighth: Binary Search Tree (15 points)
In the eighth part, you have to implement a binary search tree. The tree must satisfy the binary
search tree property: the key in each node must be greater than all keys stored in the left sub-tree,
and smaller than all keys in right sub-tree. You have to dynamically allocate space for each node
and free the space for the nodes at the end of the program.
Input format:
This program takes a file name as an argument from the command line. The file is either blank or
contains successive lines of input. Each line starts with a character, either i’ or ’s’, followed by a
tab and then an integer. For each line that starts with ’i’, your program should insert that number
in the binary search tree if it is not already there. If it is already present, you will print ”duplicate”
and not change the tree. If the line starts with a ’s’, your program should search for the value.
Output format:
For each line in the input file, your program should print the status/result of the operation. For an
insert operation, the program should print either“inserted” followed by a number, the height of the
inserted node in the tree, or ”duplicate” if the value is already present in the treee. The height of
the root node is 1. For a search, the program should either print ‘’present”, followed by the height
of the node, or “absent” based on the outcome of the search. Your program should print “error”
(and nothing else) if the file does not exist or for input lines with improper structure.
Example Execution:
Lets assume we have a file file1.txt with the following contents:
i 5
i 3
i 4
i 1
i 6
s 1
Executing the program in the following fashion should produce the output shown below:
$./eighth file1.txt
inserted 1
inserted 2
inserted 3
inserted 3
inserted 2
present 3
Ninth: Deletion with Binary Search Tree (20 points)
In the ninth part, you will extend the binary search tree in the eighth part to support the deletion
of a node. The deletion of a node is slightly trickier compared to the search and insert in the eighth
6
part.
The deletion is straightforward if the node to be deleted has only one child. You make the parent
of the node to be deleted point to that child. In this scenario, special attention must be paid only
when the node to be deleted is the root.
Deleting a node with two children requires some more work. In this case, you must find the
minimum element in the right subtree of the node to be deleted. This is the left-most node in the
right subtree. Then you insert that node in the place where the node to be deleted was. The moved
node may have a right child. You need to update the parent of the moved node to point to this
child instead of the moved node.
In either case, if the node to be deleted is the root, you must update the pointer to the root to
point to the new root node.
Input format: This program takes a file name as argument from the command line. The file is
either blank or contains successive lines of input. Each line contains a character, ’i’, ’s’, or ’d’,
followed by a tab and an integer. For each line that starts with ’i’, your program should insert that
number in the binary search tree if it is not already there. Your program should print ”duplicate”
and not insert anything if that value is already present in the binary search tree. If the line starts
with a ’s’, your program should search for that value. If the line starts with a ’d’, your program
should delete that value from the tree.
Output format: For each line in the input file, your program should print the status/result of
the operation. For insert and search, the output is the same as in the Eighth Part: For an insert
operation, the program should print either “inserted” followed by a number, the height of the
inserted node in the tree, or ”duplicate” if the value is already present in the treee. The height of
the root node is 1. For a search, the program should either print ”present”, followed by the height
of the node, or ”absent” based on the outcome of the search. For a delete, the program should
print ”success” or ”fail” based on the whether the value was present or not. Again, as in the Eight
Part, your program should print ”error” (and nothing else) if the file does not exist or for input
lines with improper structure.
Example Execution:
Lets assume we have a file file1.txt with the following contents:
i 5
i 3
i 4
i 1
i 6
i 2
s 1
d 3
s 4
Executing the program in the following fashion should produce the output shown below:
./ninth file1.txt
inserted 1
7
inserted 2
inserted 3
inserted 3
inserted 2
inserted 4
present 3
success
present 2
Submission
You have to e-submit the assignment using Sakai. Your submission should be a tar file named
pa1.tar. To create this file, put everything that you are submitting into a directory (folder)
named pa1. Then, cd into the directory containing pa1 (that is, pa1’s parent directory) and run
the following command:
tar cvf pa1.tar pa1
To check that you have correctly created the tar file, you should copy it (pa1.tar) into an empty
directory and run the following command:
tar xvf pa1.tar
This should create a directory named pa1 in the (previously) empty directory.
The pa1 directory in your tar file must contain 9 subdirectories, one each for each of the parts.
The name of the directories should be named first through ninth (in lower case). Each directory
should contain a c source file, a header file and a make file. For example, the subdirectory first will
contain, first.c, first.h and Makefile (the names are case sensitive).
Grading Guidelines
This is a large class so that necessarily the most significant part of your grade will be based on
programmatic checking of your program. That is, we will build a binary using the Makefile and
source code that you submitted, and then test the binary for correct functionality against a set of
inputs. Thus:
• You should not see or use your friend’s code either partially or fully. We will run
state of the art plagiarism detectors. We will report everything caught by the
tool to Office of Student Conduct.
• You should make sure that we can build your program by just running make.
• You should test your code as thoroughly as you can. In particular, your code should be adept
at handling exceptional cases. For example, programs should not crash if the argument is not
a proper number or a file does not exist.
8
• Your program should produce the output following the example format shown in previous
sections. Any variation in the output format can result in up to 100% penalty. Be
especially careful to not add extra whitespace or newlines. That means you will probably not
get any credit if you forgot to comment out some debugging message.
• We will provide an autograder and sample test cases to test your program and your final
pa1.tar submission. Pay attention to the announcements in a couple of days.
Be careful to follow all instructions. If something doesn’t seem right, ask.
9