2016/WeensyOS – CS61
Copyright By PowCoder代写加微信 assignmentchef
2016/WeensyOS
Jump to:navigation, search
Computer Science 61 and E61
Systems Programming and Machine Organization
1 Assignment 4: WeensyOS
1.1 Get the code
1.2 Initial state
1.4.1 Running WeensyOS
1.4.2 Memory system layout
1.4.3 Address composition
1.4.4 Kernel and process address spaces
1.5 Step 1: Kernel isolation
1.6 Step 2: Isolated address spaces
1.7 Step 3: Virtual page allocation
1.8 Step 4: Overlapping address spaces
1.9 Step 5: Fork
1.10 Step 6: Shared read-only memory
1.11 Step 7: Freeing memory
1.12 Extra credit
1.13 Turnin
Assignment 4: WeensyOS
In this assignment, you implement process memory isolation, virtual memory, and some system calls in a tiny operating system. This will introduce you to virtual memory and operating system design.
Due Sat 11/5 11:59:59pm (extension 1 day later)
This assignment may be completed in pairs.
You must run this assignment on the Appliance. Running on Linux will probably work too, but running on Mac or a Windows box without a VM will not likely work.
You may want to ponder Chapter 9 of the text. The 64-bit x86 virtual memory architecture is described in Section 9.7. The PTE_P, PTE_W, and PTE_U bits are shown in Figure 9.23 and discussed in Section 9.7.1.
Get the code
Start with the cs61-psets repository you used for Assignment 3.
First, ensure that your repository has a handout remote. Type
git remote show handout
If this reports an error, run
git remote add handout git://github.com/cs61/cs61-psets.git
Then run git pull handout master. This will merge our Assignment 4 code with your previous work. If you have any “conflicts” from Assignment 3, resolve them before continuing further. Run git push to save your work back to your personal repository.
You may also create a new cs61-psets repository for this assignment.
Don’t forget to enter your repository URL on the grading server.
Initial state
For this assignment, there is no handy make check functionality. Instead, you should run your instance of Weensy OS and visually compare it to the images you see below in the assignment.
Run make run in your pset4 directory. You should see something like this, which shows four versions of the p-allocator process running in parallel:
This image loops forever; in an actual run, the bars will move to the right and stay there. Don’t worry if your image has different numbers of K’s or otherwise has different details.
If your bars run painfully slowly, edit the p-allocator.c file and reduce the ALLOC_SLOWDOWN constant.
Stop now to read and understand p-allocator.c. Here’s what’s going on in the physical memory display.
WeensyOS displays the current state of physical and virtualmemory. Each character represents 4 KB of memory: a single page. There are 2 MB of physical memory in total. (How many pages is this?)
WeensyOS runs four processes, 1 through 4. Each process is compiled from the same source code (p-allocator.c), but linked to use a different region of memory.
Each process asks the kernel for more heap space, one page at a time, until it runs out of room. As usual, each process’s heap begins just above its code and global data, and ends just below its stack. The processes allocate space at different rates: compared to Process 1, Process 2 allocates space twice as quickly, Process 3 goes three times faster, and Process 4 goes four times faster. (A random number generator is used, so the exact rates may vary.) The marching rows of numbers show how quickly the heap spaces for processes 1, 2, 3, and 4 are allocated.
Here are two labeled memory diagrams, showing what the characters mean and how memory is arranged.
The virtual memory display is similar.
The virtual memory display cycles between the four processes’ address spaces. However, all the address spaces are the same for now.
Blank spaces in the virtual memory display correspond to unmapped addresses. If a process (or the kernel) tries to access such an address, the processor will page fault.
The character shown at address X in the virtual memory display identifies the owner of the corresponding physical page.
In the virtual memory display, a character is reverse video if an application process is allowed to access the corresponding address. Initially, any process can modify all of physical memory, including the kernel. Memory is not properly isolated.
You will implement complete and correct memory isolation for WeensyOS processes. Then you’ll implement full virtual memory, which will improve utilization. You’ll implement fork—creating new processes at runtime—and exit—destroying processes at runtime.
We need to provide a lot of support code for this assignment, but the code you write will be limited. Our solutions contain less than 200 lines. All your code goes in kernel.c (except for part of step 6).
Running WeensyOS
Read the README-OS.md file for information on how to run WeensyOS. If QEMU’s default display causes accessibility problems, you will want to run make run-console. To make run-console the default, run export QEMUCONSOLE=1 in your shell.
There are several ways to debug WeensyOS. We recommend adding log_printf statements to your code (the output of log_printf is written to the file log.txt), and use assertions to catch problems early (for instance, call check_page_table_mappings and check_page_table_ownership to test a page table for obvious issues).
Memory system layout
WeensyOS memory system layout is described by several constants.
KERNEL_START_ADDR
Start of kernel code.
KERNEL_STACK_TOP
Top of kernel stack. The kernel stack is one page long.
CGA console memory.
PROC_START_ADDR
Start of application code. Applications should not be able to access memory below PROC_START_ADDR, except for the single page at console.
MEMSIZE_PHYSICAL
Size of physical memory in bytes. WeensyOS does not support physical addresses ≥ MEMSIZE_PHYSICAL. Equals 0x200000 (2MB).
MEMSIZE_VIRTUAL
Size of virtual memory. WeensyOS does not support virtual addresses ≥ MEMSIZE_VIRTUAL. Equals 0x300000 (3MB).
Address composition
WeensyOS uses several macros to handle addresses. They are defined at the top of x86-64.h. The most important include:
Size of a memory page. Equals 4096 (or, equivalently, 1 << 12).PAGENUMBER(addr)The page number for the page containing addr. Expands to something like addr / PAGESIZE.PAGEADDRESS(pn)The initial address in page number pn. Expands to something like pn * PAGESIZE.PAGEINDEX(addr, level)The levelth page table index for addr. level must be between 0 and 3; 0 returns the level-1 page table index (address bits 39–47), 1 returns the level-2 index (bits 30–38), 2 returns the level-3 index (bits 21–29), and 3 returns the level-4 index (bits 12–20).PTE_ADDR(pe)The physical address contained in a page table entry pe. Obtained by masking off the flag bits (setting the low-order 12 bits to zero).You should both understand what these macros represent and be able to derive values if you were given a different pagesize.Kernel and process address spacesWeensyOS begins with the kernel and all processes sharing a single address space. This is defined by the kernel_pagetable page table. kernel_pagetable is initialized to the identity mapping: virtual address X maps to physical address X.As you work through the pset, you will shift processes to using their own independent address spaces, where each process can access only a subset of physical memory.The kernel, though, still needs the ability to access any location in physical memory. Therefore, all kernel functions run using the kernel_pagetable page table. Thus, in kernel functions, each virtual address maps to the physical address with the same number. The exception function explicitly installs kernel_pagetable when it begins.WeensyOS system calls are more expensive than they need to be, since every system call switches address spaces twice (once to kernel_pagetable and once back to the process’s page table). Real operating systems avoid this overhead. In real operating systems, kernels access memory using process page tables, rather than a kernel-specific kernel_pagetable. This makes the kernel code more complicated, since kernels can’t always access all of physical memory directly.Step 1: Kernel isolationWeensyOS processes could stomp all over the kernel’s memory if they wanted. Better stop that. Change kernel, the kernel initialization function, so that kernel memory is inaccessible to applications—except for the memory holding the CGA console (the single page at (uintptr_t) console == 0xB8000).When you are done, WeensyOS should look like this. In the virtual map, kernel memory is no longer reverse-video, since the user can’t access it. Note the lonely CGA console memory block.Use virtual_memory_map. A description of this function is in kernel.h. You will benefit from reading all the function descriptions in kernel.h. You can supply NULL for the allocator argument for now.If you really want to look at the code for virtual_memory_map, it is in k-hardware.c, along with many other hardware functions.The perm argument to virtual_memory_map is a bitwise-or of zero or more PTE flags, PTE_P, PTE_W, and PTE_U. PTE_P marks Present pages (pages that are mapped). PTE_W marks Writable pages. PTE_U marks User-accessible pages—pages accessible to applications. You want kernel memory to be mapped with permissions PTE_P|PTE_W, which will prevent applications from reading or writing the memory, while allowing the kernel to both read and write.Make sure that your sys_page_alloc system call preserves kernel isolation: Applications shouldn’t be able to use sys_page_alloc to screw up the kernel.Step 2: Isolated address spacesImplement process isolation by giving each process its own independent page table. Your OS should look like this:Thus, each process only has permission to access its own pages. You can tell this because only its own pages are shown in reverse video.What goes in per-process page tables:The initial mappings for addresses less than PROC_START_ADDR should be copied from those in kernel_pagetable. You can use a loop with virtual_memory_lookup and virtual_memory_map to copy them. Alternately, you can copy the mappings from the kernel’s page table into the new page tables; this is faster, but make sure you copy the right data!The initial mappings for the user area—addresses greater than or equal to PROC_START—should be inaccessible to user processes (no PTE_U). In our solution (shown above), these addresses are totally inaccessible (so they show as blank), but you can also change this so that the mappings are still there, but accessible only to the kernel, as in this diagram:The reverse video shows that this OS also implements process isolation correctly.How to implement per-process page tables:Change process_setup to create per-process page tables.We suggest you write a copy_pagetable(x86_64_pagetable* pagetable, int8_t owner) function that allocates and returns a new page table, initialized as a copy of pagetable. This function will be useful in Step 5. In process_setup you can modify the page table returned by copy_pagetable according to the requirements above. Your function can use pageinfo to find free pages to use for page tables. Read about pageinfo at the top of kernel.c.Remember that the x86-64 architecture uses four-level page tables.The easiest way to copy page tables involves an allocator function suitable for passing to virtual_memory_map.You’ll need at least to allocate a level-1 page table and initialize it to zero. You can also set up the whole four-level page table skeleton (for addresses 0…MEMSIZE_VIRTUAL – 1) yourself; then you don’t need an allocator function.A physical page is free if pageinfo[PAGENUMBER].refcount == 0. Look at the other code in kernel.c for some hints on how to examine the pageinfo array.All of process P’s page table pages must have pageinfo[…].owner == P or our checking functions will fail. This will affect your allocator function. (Hint: Don’t forget that global variables are allowed in this class!)If you create an incorrect page table, WeensyOS might crazily reboot. Don’t panic! Add log_printf statements. Another useful technique: add infinite loops to your kernel to track down exactly where a fault occurs. (If the OS stops, then the crash occurs after the infinite loop.)Step 3: Virtual page allocationSo far, WeensyOS processes use physical page allocation: the page with physical address X is used to satisfy the sys_page_alloc(X) allocation request for virtual address X. This is inflexible and limits utilization. Change the implementation of the INT_SYS_PAGE_ALLOC system call so that it can use any free physical page to satisfy a sys_page_alloc(X) request.Your new INT_SYS_PAGE_ALLOC code must perform the following tasks.Find a free physical page using the pageinfo array. Return -1 to the application if you can’t find one. Use any algorithm you like to find a free physical page; we just return the first one we find.Record the physical page’s allocation in pageinfo.Map that physical page at the requested virtual address.Don’t modify the physical_page_alloc helper function, which is also used by the program loader. You can write a new function if you want.Here’s how our OS looks after this step.Step 4: Overlapping address spacesNow the processes are isolated, which is awesome. But they’re still not taking full advantage of virtual memory. Isolated address spaces can use the same virtual addresses for different physical memory. There’s no need to keep the four process address spaces disjoint.In this step, change each process’s stack to start from address 0x300000 == MEMSIZE_VIRTUAL.Now the processes have enough heap room to use up all of physical memory!If there’s no physical memory available, sys_page_alloc should return an error to the caller (by returning -1). (Our solution additionally prints “Out of physical memory!” to the console when this happens; you don’t need to.)Step 5: ForkThe fork system call is one of Unix’s great ideas. It starts a new process as a copy of an existing process. The fork system call appears to return twice, once to each process. To the child process, it returns 0. To the parent process, it returns the child’s process ID.Run WeensyOS with make run or make run-console. At any time, press the ‘f’ key. This will soft-reboot WeensyOS and ask it to run a single p-fork process, rather than the gang of allocators. You should see something like this:This is because you haven’t implemented fork yet.Implement fork.When a process calls fork, look for a free process slot in the processes[] array. Don’t use slot 0. If no slot exists, return -1 to the caller.If a free slot is found, make a copy of current->p_pagetable, the forking process’s page table, using your function from earlier.
But you must also copy the process data in every application page shared by the two processes. The processes should not share any writable memory except the console (otherwise they wouldn’t be isolated). So fork must examine every virtual address in the old page table. Whenever the parent process has an application-writable page at virtual address V, then fork must allocate a new physical page P; copy the data from the parent’s page into P, using memcpy; and finally map page P at address V in the child process’s page table.
The child process’s registers are initialized as a copy of the parent process’s registers, except for reg_rax.
Use virtual_memory_lookup to query the mapping between virtual and physical addresses in a page table.
When you’re done, you should see something like this after pressing ‘f’.
An image like this means you forgot to copy the data for some pages, so the processes are actually sharing stack and/or data pages:
Step 6: Shared read-only memory
It’s wasteful for fork() to copy all of a process’s memory. For example, most processes, including p-fork, never change their code. So what if we shared the memory containing the code? That’d be fine for process isolation, as long as neither process could write the code.
Change the process loader in k-loader.c to detect read-only program segments and map them as read-only for applications (PTE_P|PTE_U). A program segment ph is read-only iff (ph->p_flags & ELF_PFLAG_WRITE) == 0.
Your fork() code shouldn’t copy shareable pages, but it should keep track of the number of active references to each user page. Specifically, if pageinfo[pn].refcount > 0 and pageinfo[pn].owner > 0, then pageinfo[pn].refcount should equal the number of times pn is mapped in process page tables.
When you’re done, running p-fork should look like this:
Each process’s virtual address space begins with a darker-colored “1”. The dark color indicates that the corresponding physical page has reference count (refcount) greater than 1. (The color difference is only visible on graphical QEMU; the console version doesn’t distinguish between light reverse-video and dark reverse-video.)
Mark a program segment read-only after the memcpy and memset operations that add data to the segment. Otherwise you’ll get a fault.
Step 7: Freeing memory
So far none of your test programs have ever freed memory or exited. Memory allocation’s pretty easy until you add free! So let’s do that, by allowing applications to exit. In this exercise you’ll implement the sys_exit system call, which exits the current process.
This exercise is worth fewer points than others, but it is important: freeing memory will tend to expose weaknesses and problems in your other code.
To test your work, use make run and then type ‘e’. This reboots WeensyOS to run the p-forkexit program. (Initially it’ll crash because sys_exit() isn’t implemented yet.) p-forkexit combines two types of behavior:
Process 1 forks children indefinitely.
The child processes, #2 and up, are memory allocators, as in the previous parts of the pset. But with small probability at each step, each child process either exits or attempts to fork a new child.
The result is that once your code is correct, p-forkexit makes crazy patterns forever. An example:
Your picture might look a little different; for example, thanks to Step 6, your processes should share a code page, which would appear as a darker-colored “1”.
Here’s your task.
sys_exit should mark a process as free and free all of its memory. This includes the process’s code, data, heap, and stack pages, as well as the pages used for its page directory and page table pages.
In p-forkexit, unlike in previous parts of the pset, sys_fork can run when there isn’t quite enough memory to create a new process. Your code should handle this case. If there isn’t enough free memory to allocate a process, fork() should clean up after itself (i.e., free any memory that was allocated for the new process before memory ran out), and then return -1 to the caller. There should be no memory leaks.
The virtual_memory_check function, which runs periodically, should help catch some errors. Feel free to add checks of your own.
Extra credit
If you are finished and can’t wait to do more of this type of work, try:
Copy-on-write page allocation!
Faster system calls, for instance using the syscall and sysexit instructions!
And if that doesn’t exhaust your curiosity, take CS161 next semester!
You will turn in your code by pushing your git repository to github.com/cs61/YOUR-PSET_REPO.git and updating the grading server.
Retrieved from “https://cs61.seas.harvard.edu/wiki/index.php?title=2016/WeensyOS&oldid=5848”
Navigation menu
Personal tools
程序代写 CS代考加微信: assignmentchef QQ: 1823890830 Email: [email protected]
Reviews
There are no reviews yet.