[SOLVED] CS代考 COMP9444 Assignment 1

COMP9444 Assignment 1

COMP9444 Neural Networks and Deep Learning

Copyright By PowCoder代写加微信 assignmentchef

Term 3, 2022

Assignment 1 – Network Structures and Hidden Unit Dynamics

Due: Wednesday 19 October, 5pm

Marks: 20% of final assessment

In this assignment, you will be implementing and
training various neural network models for
three different tasks, and analysing the results.

You are to submit two python files
crown.py and encoder.py,
as well as a written report hw1.pdf
(in pdf format).

Provided Files

Copy the archive hw1.zip into your own filespace and unzip it. This should create a directory hw1
with the data file crown.csv, subdirectories plot
as well as ten python files
crown.py, encoder.py,
crown_main.py,
encoder_main.py, encoder_model.py,
seq_train.py, seq_models.py, seq_plot.py,
reber.py and anbn.py.

Your task is to complete the skeleton files
crown.py, encoder.py
and submit them, along with your report.

Part 1: Fractal Classification Task

For Part 1 you will be training a network to distinguish
dots in the crown-shaped fractal pattern shown above.
The supplied code
crown_main.py
loads the training data from
crown.csv,
applies the specified neural network model and produces a
graph of the resulting function, along with the data.
For this task there is no test set as
such, but we instead judge the generalization by plotting the function
computed by the network and making a visual assessment.

Provide code for a pytorch module called Full3Net
which implements a 3-layer fully connected neural network
with two hidden layers using tanh activation,
followed by the output layer with one node using sigmoid
activation.
Your network should have the same number of hidden nodes in
each layer, specified by the variable hid.
The hidden layer activations (after applying tanh)
should be stored into
self.hid1 and self.hid2
so they can be graphed afterwards.

[1 mark] Train your network by typing
python3 crown_main.py –net full3 –hid ⟨hid⟩

Try to determine a number of hidden nodes close to
the mininum required for the network to be trained and classify the data successfully
(although, it need not be the absolute minimum).
You may need to run the network a few times before hitting on
a set of initial weights which allows it to learn the data.
(If it trains for a couple of minutes and seems to be stuck in a local minimum,
kill it with ⟨cntrl⟩-c and run it again).
You are free to adjust the learning rate and initial weight size, if you want to.
The graph_output() method will generate a picture of the function
computed by your network and store it in the plot subdirectory
with a name like out_full3_?.png.
You should include this picture in your report,
as well as a calculation of the total number of
independent parameters in your network
(based on the number of hidden nodes you have chosen).

Provide code for a pytorch module called Full4Net
which implements a 4-layer network, the same as Full3Net
but with an additional hidden layer.
All three hidden layers should have the same number
of nodes (hid).
The hidden layer activations (after applying tanh)
should be stored into
self.hid1, self.hid2 and self.hid3.

[1 mark] Train your 4-layer network by typing
python3 crown_main.py –net full4 –hid ⟨hid⟩

Try to determine a number of hidden nodes close to
the mininum required for the network to be trained successfully.
Keep in mind that the loss function might decline initially,
appear to stall for several epochs,
but then continue to decline.
The graph_output() method will generate a picture of the function
computed by your network and store it in the plot subdirectory
with a name like out_full4_?.png,
and the graph_hidden() method should generate
plots of all the hidden nodes in all three hidden layers,
with names like hid_full4_?_?_?.png.
You should include the plot of the output and the plots of all the hidden
units in all three layers in your report,
as well as a calculation of the total number of
independent parameters in your network.

Provide code for a pytorch module called DenseNet
which implements a 3-layer densely connected neural network.
Your network should be the same as Full3Net except that
it should also include shortcut connections from the input to the
second hidden layer and output layer, and from the first hidden layer
to the second hidden layer and output layer.
Each hidden layer should have hid units and tanh activation,
and the output node should have sigmoid activation.
The hidden layer activations (after applying tanh)
should be stored into
self.hid1 and self.hid2.
Specifically, the hidden and output activations should be calculated according
to the following equations.
(Note that there are various ways to implement these equations in pytorch; for example, using a separate nn.Parameter for each individual bias and weight matrix,
or combining several of them into nn.Linear and making use of torch.cat()).
h1j= tanh( b1j +
Σk w10jkxk )
h2i= tanh( b2i +
Σk w20ikxk +
Σj w21ij h1j )
out= sigmoid( bout +
Σk w30kxk +
Σj w31j h1j +
Σi w32i h2i )

[1 mark] Train your Dense Network by typing
python3 cross_main.py –net dense –hid ⟨hid⟩ –lr ⟨learning_rate⟩

As before, try to determine a number of hidden nodes close to
the mininum required for the network to be trained successfully.
You may like to adjust the learning rate as well.
You should include the graphs of the output and all the hidden nodes
in both layers in your report,
as well as a calculation of the total number of
independent parameters in your network.

Briefly discuss the following points:
the total number of independent parameters in each of the three networks
(using the number of hidden nodes determined by your experiments)
and the approximate number of epochs required to train
each type of network,

a qualitative description of the functions
computed by the different layers of Full4Net
and DenseNet,

the qualitative difference, if any, between the overall function
(i.e. output as a function of input) computed by the three networks.

Part 2: Encoder Networks

In Part 2 you will be editing the file encoder.py to create a dataset which, when run in combination with encoder_main.py, produces the following image (which is intended to be a stylized map of Malta).

You should first run the code by typing
python3 encoder_main.py –target star16

Note that target is determined by the tensor
star16 in encoder.py,
which has 16 rows and 8 columns,
indicating that there are 16 inputs and 8 outputs.
The inputs use a one-hot encoding
and are generated in the form of an
identity matrix using torch.eye()

[2 marks] Create by hand a dataset in the form of a tensor called
malta28 in the file encoder.py
which, when run with the following command, will produce
an image topologically the same as the one
shown above (but possibly rotated or reflected).
python3 encoder_main.py –target malta28

The pattern of dots and lines must be topologically identical. But, it is fine for it to be rotated or reflected, compared to the image above.
Note in particular the eight “anchor points” in the corners and edges of the figure.

Your tensor should have 28 rows and 21 columns.
Include the final image in your report,
and include the tensor malta28
in your file encoder.py

Part 3: Hidden Unit Dynamics for Recurrent Networks

In Part 3 you will be investigating the hidden unit dynamics
of recurrent networks trained on language prediction tasks,
using the supplied code
seq_train.py and
seq_plot.py.

Train a Simple Recurrent Network (SRN) on the prediction task by typing
python3 seq_train.py –lang reber

This SRN has 7 inputs, 2 hidden units and 7 outputs.
The trained networks are stored every 10000 epochs, in the
net subdirectory.
After the training finishes, plot the hidden unit activations
at epoch 50000 by typing
python3 seq_plot.py –lang reber –epoch 50

The dots should be arranged in discernable clusters by color.
If they are not, run the code again until the training is successful.
The hidden unit activations are printed according to their “state”,
using the colormap “jet”:

Based on this colormap, annotate your figure
(either electronically, or with a pen on a printout)
by drawing a circle around the cluster of points
corresponding to each state in the state machine,
and drawing arrows between the states,
with each arrow labeled with its
corresponding symbol.
Include the annotated figure in your report.

Train an SRN on the
language prediction task by typing
python3 seq_train.py –lang anbn

The anbn language
is a concatenation of a random number of A’s
followed by an equal number of B’s.
The SRN has 2 inputs, 2 hidden units and 2 outputs.

Look at the predicted probabilities of A and B as the training progresses.
The first B in each sequence and all A’s after the first A
are not deterministic and can only be predicted in a probabilistic sense.
But, if the training is successful, all other symbols
should be correctly predicted.
In particular, the network should predict the last B in each sequence
as well as the subsequent A. The error should be consistently
below 0.01.
If the network appears to have learned the task successfully,
you can stop it at any time using ⟨cntrl⟩-c.
If it appears to be stuck in a local minimum,
you can stop it and run the code again until it is successful.

After the training finishes, plot the hidden unit activations by typing

python3 seq_plot.py –lang anbn –epoch 100

Include the resulting figure in your report.
The states are again printed according to the colormap “jet”.
Note, however, that these “states” are not unique but are instead
used to count either the number of A’s we have seen or the number
of B’s we are still expecting to see.

Briefly explain how the
prediction task is achieved by the network,
based on the figure you generated in Question 2.
Specifically, you should describe how the hidden unit activations
change as the string is processed, and how it is able to
correctly predict the last B in each sequence as well as the following A.

Train an SRN on the
language prediction task by typing
python3 seq_train.py –lang anbncn

The SRN now has 3 inputs,
3 hidden units and 3 outputs.
Again, the “state” is used to count up the A’s and
count down the B’s and C’s.
Continue training (re-starting, if necessary) for 200k epochs,
or until the network is able to reliably predict
all the C’s as well as the subsequent A, and the error is consistently
in the range of 0.01 or 0.02.

After the training finishes, plot the hidden unit activations by typing

python3 seq_plot.py –lang anbncn –epoch 200

Rotate the figure in 3 dimensions to get one or more good view(s) of the points
in hidden unit space.

Briefly explain how the
prediction task is achieved by the network,
based on the figure you generated in Question 4.
Specifically, you should describe how the hidden unit activations
change as the string is processed, and how it is able to
correctly predict the last B in each sequence as well as
all of the C’s and the following A.

This question is intended to be more challenging.
Train an LSTM network to predict the Embedded, by typing
python3 seq_train.py –lang reber –embed True –model lstm –hid 4

You can adjust the number of hidden nodes if you wish.
Once the training is successful, try to analyse the behavior of
the LSTM and explain how the task is accomplished
(this might involve modifying the code so that it returns and prints out the
context units as well as the hidden units).

Submission

You should submit by typing

give cs9444 hw1 crown.py encoder.py hw1.pdf

You can submit as many times as you like – later submissions will overwrite earlier ones. You can check that your submission has been received by using the following command:

9444 classrun -check hw1

The submission deadline is Wednesday 19 October, 5pm.
In accordance with new UNSW-wide policies, 5% penalty will be applied for every 24 hours late after the deadline, up to a maximum of 5 days, after which submissions will not be accepted.

Additional information may be found in the FAQ and will be considered as part of the specification for the project. You should check this page regularly.

Plagiarism Policy

Group submissions will not be allowed for this assignment. Your code and report must be entirely your own work. Plagiarism detection software will be used to compare all submissions pairwise (including submissions for similar assignments from previous offering, if appropriate) and serious penalties will be applied, particularly in the case of repeat offences.

DO NOT COPY FROM OTHERS; DO NOT ALLOW ANYONE TO SEE YOUR CODE

Please refer to the
UNSW Policy on Academic Integrity and Plagiarism
if you require further clarification on this matter.

Good luck!

程序代写 CS代考加微信: assignmentchef QQ: 1823890830 Email: [email protected]