ECS 150: Project #4 File system
Dr. Jol Porquet
UC Davis, Spring Quarter 2017
Changelog
- v2: Removed
block_disk_create()
fromdisk.[ch]
file (this function does not need to be used it is only used byfs_make.x
internally to create a new virtual disk) - v1: Fix example in Phase 0
- v0: First publication
General information
Due before 11:59 PM, Friday, June 2nd, 2017.
You will be working with a partner for this project. Remember, you cannot keep the same partner for more than 2 projects over the course of the quarter.
The reference work environment is the CSIF.
Specifications
Note that the specifications for this project are subject to change at anytime for additional clarification. Make sure to always refer to the latest version.
Introduction
The goal of this project is to implement the support of a very simple file system, ECS150-FS. This file system is based on a FAT and supports up to 128 files in a single root directory.
The file system is implemented on top of a virtual disk. This virtual disk is actually a simple binary file that is stored on the real file system provided by your computer.
Exactly like real hard drives which are split into sectors, the virtual disk is logically split into blocks. The first software layer involved in the file system implementation is the block APIand is provided to you. This block API is used to open or close a virtual disk, and read or write entire blocks from it.
Above the block layer, the FS layeris in charge of the actual file system management. Through the FS layer, you can mount a virtual disk, list the files that are part of the disk, add or delete new files, read from files or write to files, etc.
Constraints
Your library must be written in C, be compiled with GCC and only use the standard functions provided by the GNU C Library(aka libc
). Allthe functions provided by the libc
can be used, but your program cannot be linked to any other external libraries.
Your source code should follow the relevant parts of the Linux kernel coding styleand be properly commented.
Skeleton code
The skeleton code that you are expected to complete is available in /home/jporquet/ecs150/
. This code already defines most of the prototypes for the functions you must implement, as explained in the following sections.
$ cd /home/jporquet/ecs150/$ tree. libfs disk.c disk.h fs.c* fs.h Makefile* Makefile test_fs.c
In the subdirectory libfs
, there are the files composing the file-system library that you must complete. The files to complete are marked with a star (you should have noreason to touch any of the headers which are not marked with a star, even if you think you do).
Phase 0: the ECS150-FS specification
For this project, the specification for a very simple file system has been defined: its the ECS150-FSfile system.
The layout of ECS150-FS on a disk is composed of four consecutive logical parts:
- The Superblock is the very first block of the disk and contains information about the file system (number of blocks, size of the FAT, etc.)
- The File Allocation Table is located on one or more blocks, and keeps track of both the free data blocks and the mapping between files and the data blocks holding their content.
- The Root directory is in the following block and contains an entry for each file of the file system, defining its name, size and the location of the first data block for this file.
- Finally, all the remaining blocks are Data blocks and are used by the content of files.
The size of virtual disk blocks is 4096 bytes.
Unless specified otherwise, all values in this specification are unsignedand the order of multi-bytes values is little-endian.
Superblock
The superblock is the first block of the file system. Its internal format is:
Offset | Length (bytes) | Description |
---|---|---|
0x00 | 8 | Signature (must be equal to ECS150FS) |
0x08 | 2 | Total amount of blocks of virtual disk |
0x0A | 2 | Root directory block index |
0x0C | 2 | Data block start index |
0x0E | 2 | Amount of data blocks |
0x10 | 1 | Number of blocks for FAT |
0x11 | 4079 | Unused/Padding |
If one creates a file system with 8192 data blocks, the size of the FAT will be 8192 x 2 = 16384 bytes long, thus spanning 16384 / 4096 = 4 blocks. The root directory block index will therefore be 5, because before it there are the superblock (block index #0) and the FAT (starting at block index #1 and spanning 4 blocks). The data block start index will be 6, because its located right after the root directory block. The total amount of blocks for such a file system would then be 1 + 4 + 1 + 8192 = 8198.
FAT
The FAT is a flat array, possibly spanning several blocks, which entries are composed of 16-bit unsigned words. There are as many entries as data blocksin the disk.
The first entry of the FAT (entry #0) is always invalid and contains the special FAT_EOC
( End-of-Chain) value which is 0xFFFF
. Entries marked as 0 correspond to free data blocks. Entries containing a positive value are part of a chainmap and represent a link to the next block in the chainmap.
Note that although the numbering in the FAT starts at 0, entry contents must be added to the data block start index in order to find the real block number on disk.
The following table shows an example of a FAT containing two files:
- The first file is of length 18,000 bytes (thus spanning 5 data blocks) and is contained in consecutive data blocks (DB#2, DB#3, DB#4, DB#5 and DB#6).
- The second file is of length 5,000 bytes (this spanning 2 data blocks) and its content is fragmented in two non-consecutive data blocks (DB#1 and DB#8).
Each entry in the FAT is 16-bit wide.
FAT index: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Content: | 0xFFFF | 8 | 3 | 4 | 5 | 6 | 0xFFFF | 0 | 0xFFFF | 0 | 0 |
Root directory
The root directory is an array of 128 entries stored in the block following the FAT. Each entry is 32-byte wide and describes a file, according to the following format:
Offset | Length (bytes) | Description |
---|---|---|
0x00 | 16 | Filename (including NULL character) |
0x10 | 4 | Size of the file (in bytes) |
0x14 | 2 | Index of the first data block |
0x16 | 10 | Unused/Padding |
An empty entry is defined by the first character of the entrys filename being equal to 0.
The entry for an empty file, which doesnt have any data blocks, would have its size be 0, and the index of the first data block be FAT_EOC
.
Continuing the previous example, lets assume that the first file is named test1 and the second file test2. Lets also assume that there is an empty file named test3. The content of the root directory would be:
Filename (16 bytes) | Size (4 bytes) | Index (2 bytes) | Padding (10 bytes) |
---|---|---|---|
test1 | 18000 | 2 | xxx |
test2 | 5000 | 1 | xxx |
test3 | 0 | FAT_EOC |
xxx |
xxx | xxx | xxx | |
Formatting program
A FS formatter is provided to you in /home/jporquet/ecs150/fs_make.x
. The purpose of this program is to create a new virtual disk and initialize an empty file system on it.
It accepts two arguments: the name of the virtual disk image and the number of data blocks to create:
$ ./fs_make.x disk.fs 4096Created virtual disk 'disk.fs' with '4096' data blocks
Note that this formatter can not create a file-system of more than 8192 data blocks (which already makes a 33MB virtual disk).
Reference program and testing
A reference program is provided to you in /home/jporquet/ecs150/fs_ref.x
. This program accepts multiple commands (one per run) and allows you to:
- Get some information about a virtual disk:
$ fs_ref.x info <diskname>
- List all the files contained in a virtual disk:
$ fs_ref.x ls <diskname>
- Etc. in order to have the list of commands:
$ fs_ref.x
The code of this executable is actually provided to you in test_fs.c
and you will have to implement the complete API that this program uses. The creation of new virtual disks is the only tasks that you dont have to program yourself as it is provided by fs_make.x
.
Otherwise your implementation should generate the same output as the reference program, and the manipulations that are performed on the virtual disk should be understood by both the reference program and your implementation. For example, after creating a virtual disk, the output of the command info
from the reference program should match exactly the output from your implementation:
$ ./fs_make.x disk.fs 8192Creating virtual disk 'disk.fs' with '8192' data blocks$ ./fs_ref.x info disk.fs > ref_output$ ./test_fs.x info disk.fs > my_output$ diff ref_output my_output$
Phase 1: Mounting/unmounting
In this first phase, you must implement the function fs_mount()
and fs_umount()
.
fs_mount()
makes the file system contained in the specified virtual disk ready to be used. You need to open the virtual disk, using the block API, and load the meta-information that is necessary to handle the file system operations described in the following phases. fs_umount()
makes sure that the virtual disk is properly closed and that all the internal data structures of the FS layer are properly cleaned.
For this phase, you should probably start by defining the data structures corresponding to the blocks containing the meta-information about the file system (superblock, FAT and root directory).
In order to correctly describe these data structures, you will probably need to use the integer types defined in stdint.h
, such as int8_t
, uint8_t
, uint16_t
, etc. Also, when describing your data structures and in order to avoid the compiler to interfere with their layout, its always good practice to attach the attribute packed
to these data structures.
Dont forget that your function fs_mount()
should perform some error checking in order to verify that the file system has the expected format. For example, the signature of the file system should correspond to the one defined by the specification, the total amount of block should correspond to what block_disk_count()
returns, etc.
Once youre able to mount a file system, you can implement the function fs_info()
which prints some information about the mounted file system and make sure that the output corresponds exactly to the reference program.
It is important to observe that the file system must provide persistent storage. Lets assume that you have created a file system on a virtual disk and mounted it. Then, you create a few files and write some data to them. Finally, you unmount the file system. At this point, all data must be written onto the virtual disk. Another application that mounts the file system at a later point in time must see the previously created files and the data that was written. This means that whenever umount_fs()
is called, all meta-information and file data must have been written out to disk.
Phase 2: File creation/deletion
In this second phase, you must implement fs_create()
and fs_delete()
which add or remove files from the file system.
In order to add a file, you need to find an empty entry in the root directory and fill it out with the proper information. At first, you only need to specify the name of the file and reset the other information since there is no content at this point. The size should be set to 0 and the first index on the data blocks should be set to FAT_EOC
.
Removing a file is the opposite procedure: the files entry must be emptied and all the data blocks containing the files contents must be freed in the FAT.
Once youre able to add and remove files, you can implement the function fs_ls()
which prints the listing of all the files in the file system. Make sure that the output corresponds exactly to the reference program.
Phase 3: File descriptor operations
In order for applications to manipulate files, the FS API offers functions which are very similar to the Linux file system operations. fs_open()
opens a file and returns a file descriptorwhich can then be used for subsequent operations on this file (reading, writing, changing the file offset, etc). fs_close()
closes a file descriptor.
Your library must support a maximum of 32 file descriptors that can be open simultaneously. The same file (i.e. file with the same name) can be opened multiple times, in which case fs_open()
must return multiple independent file descriptors.
A file descriptor is associated to a file and also contains a file offset. The file offset indicates the current reading/writing position in the file. It is implicitly incremented whenever a read or write is performed, or can be explicitly set by fs_lseek()
.
Finally, the function fs_stat()
must return the size of the file corresponding to the specified file descriptor. To append to a file, one can, for example, call fs_lseek(fd, fs_stat(fd));
.
Phase 4: File reading/writing
In the last phase, you must implement fs_read()
and fs_write()
which respectively read from and write to a file.
It is advised to start with fs_read()
which is slightly easier to program. You can use the reference program to write a file in a disk image, which you can then read using your implementation.
For these functions, you will probably need a few helper functions. For example, you will need a function that returns the index of the data block corresponding to the files offset. For writing, in the case the file has to be extended in size, you will need a function that allocates a new data block and link it at the end of the files data block chain. Note that the allocation of new blocks should follow the first-fitstrategy (first block available from the beginning of the FAT).
When reading or writing a certain number of bytes from/to a file, you will also need to deal properly with possible mismatches between the files current offset, the amount of bytes to read/write, the size of blocks, etc.
For example, lets assume a reading operation for which the files offset is not aligned to the beginning of the block or the amount of bytes to read doesnt span the whole block. You will probably need to read the entire block into a bouncebuffer first, and then copy only the right amount of bytes from the bounce buffer into the user-supplied buffer.
The same scenario for a writing operation would slightly trickier. You will probably need to first read the block from disk, then modify only the part starting from the files offset with the user-supplied buffer, before you can finally write the dirty block back to the disk.
These special cases happen mostly for small reading/writing operations, or at the beginning or end of a big operation. In big operations (spanning multiple blocks), offsets and sizes are perfectly aligned for all the middle blocks and the procedure is then quite simple, as blocks can be read or written entirely.
Deliverable
Content
Your submission should contain, besides your source code, the following files:
-
AUTHORS
: first name, last name, student ID, CSIF username and email of each partner, one entry per line formatted in CSV (fields are separated with commas). For example:$ cat AUTHORSHomer,Simpson,00010001,simpson32,[email protected]Robert David,Martin,00010002,rdm,[email protected]
-
REPORT.md
: a description of your submission. Your report must respect the following rules:- It must be formatted in markdown language as described in this Markdown-Cheatsheet .
- It should contain no more than 300 lines and the maximum width for each line should be 80 characters (check your editors settings to configure that).
- It should explain your high-level design choices, details about the relevant parts of your implementation, how you tested your project, the sources that you may have used to complete this project, and any other information that can help understanding your code.
- Keep in mind that the goal of this report is not to paraphrase the assignment, but to explain how you implemented it.
-
libfs/Makefile
: a Makefile that compiles your source code without any errors or warnings (on the CSIF computers), and builds a static library namedlibfs.a
.The compiler should be run with the options
-Wall -Werror
.There should also be a
clean
rule that removes generated files and puts the directory back in its original state.
Your submission should be empty of any clutter files such as executable files, core dumps, etc.
Git
Your submission must be under the shape of a Git bundle. In your git repository, type in the following command (your work must be in the branch master
):
$ git bundle create fs.bundle master
It should create the file fs.bundle
that you will submit via handin
.
You can make sure that your bundle has properly been packaged by extracting it in another directory and verifying the log:
$ cd /path/to/tmp/dir$ git clone /path/to/fs.bundle -b master fs$ cd fs$ ls -l...$ git log...
Handin
Your Git bundle, as created above, is to be submitted with handin
from one of the CSIF computers:
$ handin cs150 p4 fs.bundleSubmitting fs.bundle... ok$
You can verify that the bundle has been properly submitted:
$ handin cs150 p4The following input files have been received:...$
Academic integrity
You are expected to write this project from scratch, thus avoiding to use any existing source code available on the Internet. You must specify in your REPORT.md
file any sources of code that you or your partner have viewed to help you complete this project. All class projects will be submitted to MOSS to determine if pairs of students have excessively collaborated with other pairs, or have used the work of past students.
Excessive collaboration, or failure to list external code sources will result in the matter being transferred to Student Judicial Affairs.
Reviews
There are no reviews yet.