CMPUT 229 (Winter 2017) – Homework #1
Instructor: Karim Ali
Question 1: (5 points)
Consider that a processor architecture ToyProc, which was initially designed as big-
endian, is changed to use little-endian byte ordering. Assuming the subset of the MIPS
ISA that you are familiar with, and assuming a memory with a word-level interface,
give examples of instructions whose operations will be affected by such a change in
endianness.
Question 2: (5 points)
Write the C code that best corresponds to the following MIPS assembly code. Assume
that registers $s1, $s2, and $s3 store the values of 32-bit integers x, y, and z.
L1: beq $s1, $zero, L2
addu $s1, $s1, $s2
addu $s1, $s1, $s3
L2:
Question 3: (15 points)
For this question, assume that:
• p, q, i, j are 32-bit integers whose values are stored in $s0, $s1, $s2, and $s3,
respectively.
• A and B are arrays of integers.
• r is a pointer declared as int *r.
• r, the base address of array A, and the base address of array B are all in the stack
frame of the current function, as shown below
Addr (B[0])
Addr (A[0])
r$sp —>
For each of the C statements below, give the translation into MIPS. Do not use pseudo-
instructions in your code. Clearly label which MIPS instructions are for which statement.
a. (5 points) q = *r
b. (5 points) B[i] = A[j]
c. (5 points) p = q + A[B[j]]
Question 4: (15 points)
Write the assembly code to implement the following C function:
int selector(int array[], int i) {
return array[array[i]];
}
1 / 3
CMPUT 229 (Winter 2017) – Homework #1
Instructor: Karim Ali
Remember that the first parameter of a function is passed to the function in register $a0
and the second parameter is passed in register $a1.
Question 5: (25 points)
You have been hired by Proyota, a manufacturer of embedded processors for cars. A
new 8-bit processor is being designed and you need to help answer some questions about
the processor. This processor has eight 8-bit registers named R0, R1, . . ., R7, and also
operates with an 8-bit word. Answer the following questions:
a. (10 points) In the table below, indicate the values, in the specified forms, that can
be stored in an 8-bit register.
Description Binary Hexadecimal Decimal
Max unsigned integer
Max 2’s complement integer
Min 2’s complement integer
b. (15 points) For this part of the question, assume the following:
• The format for arithmetic instructions in this processor is as follows:
add Ra, Rb, Rc # Ra <– Rb + Rcsub Ra, Rb, Rc # Ra <– Rb – Rc• The following values (given in binary) are stored in registers:– R1 = 0100 0011,– R2 = 0100 0000, and– R3 = 0100 0001.What is the result, expressed in decimal, produced by the following sequence ofinstructions? Is it correct? If not, why not? If the code does not produce theexpected result, is there a way to rewrite it to produce correct result? If yes, writethe code that performs the correct operation.add R4, R2, R3sub R5, R1, R4Question 6: (15 points)Assume that x, y, i, j are 32-bit integers, and that their values are stored in $s0, $s1,$s2 and $s3, respectively. Assume that A and B are vectors of integers, and that thebase address of A is stored in $s4 and the base address of B is stored in $s5.In the table below, indicate how many load word (lw) and how many store word(sw) instructions are necessary to execute each of the C statements.2 / 3CMPUT 229 (Winter 2017) – Homework #1Instructor: Karim AliC statement load words (lw) store words (sw)x = y * yA[i] = x + yx = A[i] + A[j]B[i] = A[j]x = y + A[B[j]]A[B[j]] = x + yQuestion 7: (20 points)You are participating in the Computing Science Industrial Internship Program, and yourplacement is with Tiny Inc., a company that produces TinyProc— a new processor de-veloped for the automobile industry. All instructions in TinyProc have 16 bits. TinyProcalso works with 16-bit addresses. The format of a branch instruction in TinyProc is asshown below:15 13 12 10 9 7 6 0Opcode rs rt addressWhere rs and rt specify the source and target registers for the branch instruction,respectively. The address of the target of a branch instruction is computed usingthe same mechanism used in the MIPS processor, but the increment of the PC andthe shift left have to be adjusted for a 16-bit address machine: first the ProgramCounter (PC) is incremented by two, then the bitfield address of the branch instruc-tion is shifted left by one, sign-extended to sixteen bits, and added to the incrementedPC. Based on this information, answer the following questions.a. (5 points) What is the binary representation of the address field of a branch in-struction that results in the largest jump backward and on the largest jump forwardin TinyProc?b. (5 points) The range of a branch instruction is the address distance between thetarget of a branch instruction and the branch instruction itself. For example if abranch instruction is at the address 0x0010 and the target is at address is at 0x0020,then the range of this branch instruction is 0x0010 = 1610. What is the maximumrange of a branch instruction, expressed as a decimal number in TinyProc?c. (5 points) How many registers does TinyProc have?d. (5 points) The instruction beq $0, $1, SKIP branches to the instruction at thelabel SKIP if the value in register $0 and in register $1 are the same. In TinyProc,the Opcode for a beq instruction is 010. Assume that this instruction is at ad-dress 0xFC00, and that the label SKIP is at address 0xFB82. What is the binaryrepresentation of this instruction expressed in Hexadecimal?3 / 3
Reviews
There are no reviews yet.