Internet Engineering Task Force (IETF)
Request for Comments: 8446
Obsoletes: 5077, 5246, 6961
Updates: 5705, 6066
Category: Standards Track
ISSN: 2070-1721
E. Rescorla
Mozilla
August 2018
The Transport Layer Security (TLS) Protocol Version 1.3
Abstract
This document specifies version 1.3 of the Transport Layer Security
(TLS) protocol.TLS allows client/server applications to communicate
over the Internet in a way that is designed to prevent eavesdropping,
tampering, and message forgery.
This document updates RFCs 5705 and 6066, and obsoletes RFCs 5077,
5246, and 6961.This document also specifies new requirements for
TLS 1.2 implementations.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF).It represents the consensus of the IETF community.It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG).Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/rfc8446.
Rescorla Standards Track[Page 1]
RFC 8446 TLS August 2018
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors.All rights reserved.
This document is subject to BCP 78 and the IETF Trusts Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document.Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document.Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
This document may contain material from IETF Documents or IETF
Contributions published or made publicly available before November
10, 2008.The person(s) controlling the copyright in some of this
material may not have granted the IETF Trust the right to allow
modifications of such material outside the IETF Standards Process.
Without obtaining an adequate license from the person(s) controlling
the copyright in such materials, this document may not be modified
outside the IETF Standards Process, and derivative works of it may
not be created outside the IETF Standards Process, except to format
it for publication as an RFC or to translate it into languages other
than English.
Rescorla Standards Track[Page 2]
RFC 8446 TLS August 2018
Table of Contents
1. Introduction .6
1.1. Conventions and Terminology ..7
1.2. Major Differences from TLS 1.2 ..8
1.3. Updates Affecting TLS 1.2 .9
2. Protocol Overview .10
2.1. Incorrect DHE Share 14
2.2. Resumption and Pre-Shared Key (PSK) ..15
2.3. 0-RTT Data 17
3. Presentation Language 19
3.1. Basic Block Size 19
3.2. Miscellaneous 20
3.3. Numbers 20
3.4. Vectors 20
3.5. Enumerateds ..21
3.6. Constructed Types ..22
3.7. Constants .23
3.8. Variants ..23
4. Handshake Protocol 24
4.1. Key Exchange Messages .25
4.1.1. Cryptographic Negotiation ..26
4.1.2. Client Hello 27
4.1.3. Server Hello 31
4.1.4. Hello Retry Request ..33
4.2. Extensions 35
4.2.1. Supported Versions 39
4.2.2. Cookie 40
4.2.3. Signature Algorithms .41
4.2.4. Certificate Authorities .45
4.2.5. OID Filters .45
4.2.6. Post-Handshake Client Authentication 47
4.2.7. Supported Groups ..47
4.2.8. Key Share 48
4.2.9. Pre-Shared Key Exchange Modes .51
4.2.10. Early Data Indication ..52
4.2.11. Pre-Shared Key Extension ..55
4.3. Server Parameters ..59
4.3.1. Encrypted Extensions .60
4.3.2. Certificate Request ..60
4.4. Authentication Messages ..61
4.4.1. The Transcript Hash ..63
4.4.2. Certificate .64
4.4.3. Certificate Verify 69
4.4.4. Finished .71
4.5. End of Early Data ..72
Rescorla Standards Track[Page 3]
RFC 8446 TLS August 2018
4.6. Post-Handshake Messages ..73
4.6.1. New Session Ticket Message .73
4.6.2. Post-Handshake Authentication .75
4.6.3. Key and Initialization Vector Update 76
5. Record Protocol 77
5.1. Record Layer .78
5.2. Record Payload Protection 80
5.3. Per-Record Nonce 82
5.4. Record Padding ..83
5.5. Limits on Key Usage 84
6. Alert Protocol .85
6.1. Closure Alerts ..87
6.2. Error Alerts .88
7. Cryptographic Computations .90
7.1. Key Schedule .91
7.2. Updating Traffic Secrets .94
7.3. Traffic Key Calculation ..95
7.4. (EC)DHE Shared Secret Calculation .95
7.4.1. Finite Field Diffie-Hellman 95
7.4.2. Elliptic Curve Diffie-Hellman .96
7.5. Exporters .97
8. 0-RTT and Anti-Replay 98
8.1. Single-Use Tickets .99
8.2. Client Hello Recording 99
8.3. Freshness Checks ..101
9. Compliance Requirements 102
9.1. Mandatory-to-Implement Cipher Suites 102
9.2. Mandatory-to-Implement Extensions 103
9.3. Protocol Invariants ..104
10. Security Considerations ..106
11. IANA Considerations 106
12. References 109
12.1. Normative References 109
12.2. Informative References .112
Appendix A. State Machine .120
A.1. Client .120
A.2. Server .121
Appendix B. Protocol Data Structures and Constant Values 122
B.1. Record Layer .122
B.2. Alert Messages ..123
B.3. Handshake Protocol .124
B.3.1. Key Exchange Messages 125
B.3.2. Server Parameters Messages .131
B.3.3. Authentication Messages .132
B.3.4. Ticket Establishment .132
B.3.5. Updating Keys ..133
B.4. Cipher Suites 133
Rescorla Standards Track[Page 4]
RFC 8446 TLS August 2018
Appendix C. Implementation Notes 134
C.1. Random Number Generation and Seeding .134
C.2. Certificates and Authentication 135
C.3. Implementation Pitfalls ..135
C.4. Client Tracking Prevention ..137
C.5. Unauthenticated Operation 137
Appendix D. Backward Compatibility .138
D.1. Negotiating with an Older Server ..139
D.2. Negotiating with an Older Client ..139
D.3. 0-RTT Backward Compatibility 140
D.4. Middlebox Compatibility Mode 140
D.5. Security Restrictions Related to Backward Compatibility 141
Appendix E. Overview of Security Properties .142
E.1. Handshake .142
E.1.1. Key Derivation and HKDF .145
E.1.2. Client Authentication 146
E.1.3. 0-RTT .146
E.1.4. Exporter Independence 146
E.1.5. Post-Compromise Security 146
E.1.6. External References ..147
E.2. Record Layer .147
E.2.1. External References ..148
E.3. Traffic Analysis 148
E.4. Side-Channel Attacks ..149
E.5. Replay Attacks on 0-RTT ..150
E.5.1. Replay and Exporters .151
E.6. PSK Identity Exposure .152
E.7. Sharing PSKs .152
E.8. Attacks on Static RSA .152
Contributors ..153
Authors Address .160
Rescorla Standards Track[Page 5]
RFC 8446 TLS August 2018
1.Introduction
The primary goal of TLS is to provide a secure channel between two
communicating peers; the only requirement from the underlying
transport is a reliable, in-order data stream.Specifically, the
secure channel should provide the following properties:
Authentication: The server side of the channel is always
authenticated; the client side is optionally authenticated.
Authentication can happen via asymmetric cryptography (e.g., RSA
[RSA], the Elliptic Curve Digital Signature Algorithm (ECDSA)
[ECDSA], or the Edwards-Curve Digital Signature Algorithm (EdDSA)
[RFC8032]) or a symmetric pre-shared key (PSK).
Confidentiality: Data sent over the channel after establishment is
only visible to the endpoints.TLS does not hide the length of
the data it transmits, though endpoints are able to pad TLS
records in order to obscure lengths and improve protection against
traffic analysis techniques.
Integrity: Data sent over the channel after establishment cannot
be modified by attackers without detection.
These properties should be true even in the face of an attacker who
has complete control of the network, as described in [RFC3552].See
Appendix E for a more complete statement of the relevant security
properties.
TLS consists of two primary components:
A handshake protocol (Section 4) that authenticates the
communicating parties, negotiates cryptographic modes and
parameters, and establishes shared keying material.The handshake
protocol is designed to resist tampering; an active attacker
should not be able to force the peers to negotiate different
parameters than they would if the connection were not under
attack.
A record protocol (Section 5) that uses the parameters established
by the handshake protocol to protect traffic between the
communicating peers.The record protocol divides traffic up into
a series of records, each of which is independently protected
using the traffic keys.
Rescorla Standards Track[Page 6]
RFC 8446 TLS August 2018
TLS is application protocol independent; higher-level protocols can
layer on top of TLS transparently.The TLS standard, however, does
not specify how protocols add security with TLS; how to initiate TLS
handshaking and how to interpret the authentication certificates
exchanged are left to the judgment of the designers and implementors
of protocols that run on top of TLS.
This document defines TLS version 1.3.While TLS 1.3 is not directly
compatible with previous versions, all versions of TLS incorporate a
versioning mechanism which allows clients and servers to
interoperably negotiate a common version if one is supported by both
peers.
This document supersedes and obsoletes previous versions of TLS,
including version 1.2 [RFC5246].It also obsoletes the TLS ticket
mechanism defined in [RFC5077] and replaces it with the mechanism
defined in Section 2.2.Because TLS 1.3 changes the way keys are
derived, it updates [RFC5705] as described in Section 7.5.It also
changes how Online Certificate Status Protocol (OCSP) messages are
carried and therefore updates [RFC6066] and obsoletes [RFC6961] as
described in Section 4.4.2.1.
1.1.Conventions and Terminology
The key words MUST, MUST NOT, REQUIRED, SHALL, SHALL NOT,
SHOULD, SHOULD NOT, RECOMMENDED, NOT RECOMMENDED, MAY, and
OPTIONAL in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
The following terms are used:
client:The endpoint initiating the TLS connection.
connection:A transport-layer connection between two endpoints.
endpoint:Either the client or server of the connection.
handshake:An initial negotiation between client and server that
establishes the parameters of their subsequent interactions
within TLS.
peer:An endpoint.When discussing a particular endpoint, peer
refers to the endpoint that is not the primary subject of
discussion.
Rescorla Standards Track[Page 7]
RFC 8446 TLS August 2018
receiver:An endpoint that is receiving records.
sender:An endpoint that is transmitting records.
server:The endpoint that did not initiate the TLS connection.
1.2.Major Differences from TLS 1.2
The following is a list of the major functional differences between
TLS 1.2 and TLS 1.3.It is not intended to be exhaustive, and there
are many minor differences.
The list of supported symmetric encryption algorithms has been
pruned of all algorithms that are considered legacy.Those that
remain are all Authenticated Encryption with Associated Data
(AEAD) algorithms.The cipher suite concept has been changed to
separate the authentication and key exchange mechanisms from the
record protection algorithm (including secret key length) and a
hash to be used with both the key derivation function and
handshake message authentication code (MAC).
A zero round-trip time (0-RTT) mode was added, saving a round trip
at connection setup for some application data, at the cost of
certain security properties.
Static RSA and Diffie-Hellman cipher suites have been removed; all
public-key based key exchange mechanisms now provide forward
secrecy.
All handshake messages after the ServerHello are now encrypted.
The newly introduced EncryptedExtensions message allows various
extensions previously sent in the clear in the ServerHello to also
enjoy confidentiality protection.
The key derivation functions have been redesigned.The new design
allows easier analysis by cryptographers due to their improved key
separation properties.The HMAC-based Extract-and-Expand Key
Derivation Function (HKDF) is used as an underlying primitive.
The handshake state machine has been significantly restructured to
be more consistent and to remove superfluous messages such as
ChangeCipherSpec (except when needed for middlebox compatibility).
Elliptic curve algorithms are now in the base spec, and new
signature algorithms, such as EdDSA, are included.TLS 1.3
removed point format negotiation in favor of a single point format
for each curve.
Rescorla Standards Track[Page 8]
RFC 8446 TLS August 2018
Other cryptographic improvements were made, including changing the
RSA padding to use the RSA Probabilistic Signature Scheme
(RSASSA-PSS), and the removal of compression, the Digital
Signature Algorithm (DSA), and custom Ephemeral Diffie-Hellman
(DHE) groups.
The TLS 1.2 version negotiation mechanism has been deprecated in
favor of a version list in an extension.This increases
compatibility with existing servers that incorrectly implemented
version negotiation.
Session resumption with and without server-side state as well as
the PSK-based cipher suites of earlier TLS versions have been
replaced by a single new PSK exchange.
References have been updated to point to the updated versions of
RFCs, as appropriate (e.g., RFC 5280 rather than RFC 3280).
1.3.Updates Affecting TLS 1.2
This document defines several changes that optionally affect
implementations of TLS 1.2, including those which do not also support
TLS 1.3:
A version downgrade protection mechanism is described in
Section 4.1.3.
RSASSA-PSS signature schemes are defined in Section 4.2.3.
The supported_versions ClientHello extension can be used to
negotiate the version of TLS to use, in preference to the
legacy_version field of the ClientHello.
The signature_algorithms_cert extension allows a client to
indicate which signature algorithms it can validate in X.509
certificates.
Additionally, this document clarifies some compliance requirements
for earlier versions of TLS; see Section 9.3.
Rescorla Standards Track[Page 9]
RFC 8446 TLS August 2018
2.Protocol Overview
The cryptographic parameters used by the secure channel are produced
by the TLS handshake protocol.This sub-protocol of TLS is used by
the client and server when first communicating with each other.The
handshake protocol allows peers to negotiate a protocol version,
select cryptographic algorithms, optionally authenticate each other,
and establish shared secret keying material.Once the handshake is
complete, the peers use the established keys to protect the
application-layer traffic.
A failure of the handshake or other protocol error triggers the
termination of the connection, optionally preceded by an alert
message (Section 6).
TLS supports three basic key exchange modes:
(EC)DHE (Diffie-Hellman over either finite fields or elliptic
curves)
PSK-only
PSK with (EC)DHE
Rescorla Standards Track [Page 10]
RFC 8446 TLS
August 2018
Figure 1 below shows the basic full TLS handshake:
Client
Key^ ClientHello
Exch | + key_share*
| + signature_algorithms*
| + psk_key_exchange_modes*
Server
v + pre_shared_key*
^ {Certificate*}
Auth | {CertificateVerify*}
v {Finished}
[Application Data]
>
{Finished}v
<——–[Application Data*]——–>
<——->[Application Data]
+Indicates noteworthy extensions sent in the
previously noted message.
*Indicates optional or situation-dependent
messages/extensions that are not always sent.
{} Indicates messages protected using keys
derived from a [sender]_handshake_traffic_secret.
[] Indicates messages protected using keys
derived from [sender]_application_traffic_secret_N.
Figure 1: Message Flow for Full TLS Handshake
The handshake can be thought of as having three phases (indicated in
the diagram above):
Key Exchange: Establish shared keying material and select the
cryptographic parameters.Everything after this phase is
encrypted.
Server Parameters: Establish other handshake parameters
(whether the client is authenticated, application-layer protocol
support, etc.).
Rescorla Standards Track [Page 11]
ServerHello^ Key
+ key_share*| Exch
+ pre_shared_key*v
{EncryptedExtensions}^Server
{CertificateRequest*}vParams
{Certificate*}^
{CertificateVerify*}| Auth
RFC 8446 TLS August 2018
Authentication: Authenticate the server (and, optionally, the
client) and provide key confirmation and handshake integrity.
In the Key Exchange phase, the client sends the ClientHello
(Section 4.1.2) message, which contains a random nonce
(ClientHello.random); its offered protocol versions; a list of
symmetric cipher/HKDF hash pairs; either a set of Diffie-Hellman key
shares (in the key_share (Section 4.2.8) extension), a set of
pre-shared key labels (in the pre_shared_key (Section 4.2.11)
extension), or both; and potentially additional extensions.
Additional fields and/or messages may also be present for middlebox
compatibility.
The server processes the ClientHello and determines the appropriate
cryptographic parameters for the connection.It then responds with
its own ServerHello (Section 4.1.3), which indicates the negotiated
connection parameters.The combination of the ClientHello and the
ServerHello determines the shared keys.If (EC)DHE key establishment
is in use, then the ServerHello contains a key_share extension with
the servers ephemeral Diffie-Hellman share; the servers share MUST
be in the same group as one of the clients shares.If PSK key
establishment is in use, then the ServerHello contains a
pre_shared_key extension indicating which of the clients offered
PSKs was selected.Note that implementations can use (EC)DHE and PSK
together, in which case both extensions will be supplied.
The server then sends two messages to establish the Server
Parameters:
EncryptedExtensions:responses to ClientHello extensions that are
not required to determine the cryptographic parameters, other than
those that are specific to individual certificates.
[Section 4.3.1]
CertificateRequest:if certificate-based client authentication is
desired, the desired parameters for that certificate.This
message is omitted if client authentication is not desired.
[Section 4.3.2]
Rescorla Standards Track [Page 12]
RFC 8446 TLS August 2018
Finally, the client and server exchange Authentication messages.TLS
uses the same set of messages every time that certificate-based
authentication is needed.(PSK-based authentication happens as a
side effect of key exchange.)Specifically:
Certificate:The certificate of the endpoint and any per-certificate
extensions.This message is omitted by the server if not
authenticating with a certificate and by the client if the server
did not send CertificateRequest (thus indicating that the client
should not authenticate with a certificate).Note that if raw
public keys [RFC7250] or the cached information extension
[RFC7924] are in use, then this message will not contain a
certificate but rather some other value corresponding to the
servers long-term key.[Section 4.4.2]
CertificateVerify:A signature over the entire handshake using the
private key corresponding to the public key in the Certificate
message.This message is omitted if the endpoint is not
authenticating via a certificate.[Section 4.4.3]
Finished:A MAC (Message Authentication Code) over the entire
handshake.This message provides key confirmation, binds the
endpoints identity to the exchanged keys, and in PSK mode also
authenticates the handshake.[Section 4.4.4]
Upon receiving the servers messages, the client responds with its
Authentication messages, namely Certificate and CertificateVerify (if
requested), and Finished.
At this point, the handshake is complete, and the client and server
derive the keying material required by the record layer to exchange
application-layer data protected through authenticated encryption.
Application Data MUST NOT be sent prior to sending the Finished
message, except as specified in Section 2.3.Note that while the
server may send Application Data prior to receiving the clients
Authentication messages, any data sent at that point is, of course,
being sent to an unauthenticated peer.
Rescorla Standards Track [Page 13]
RFC 8446 TLS August 2018
2.1.Incorrect DHE Share
If the client has not provided a sufficient key_share extension
(e.g., it includes only DHE or ECDHE groups unacceptable to or
unsupported by the server), the server corrects the mismatch with a
HelloRetryRequest and the client needs to restart the handshake with
an appropriate key_share extension, as shown in Figure 2.If no
common cryptographic parameters can be negotiated, the server MUST
abort the handshake with an appropriate alert.
Client
ClientHello
+ key_share
ClientHello
+ key_share
{Certificate*}
{CertificateVerify*}
{Finished}
[Application Data]
>
<—————->
<—————->
<——->
Server
HelloRetryRequest
+ key_share
ServerHello
+ key_share
{EncryptedExtensions}
{CertificateRequest*}
{Certificate*}
{CertificateVerify*}
{Finished}
[Application Data*]
[Application Data]
Figure 2: Message Flow for a Full Handshake with
Mismatched Parameters
Note: The handshake transcript incorporates the initial
ClientHello/HelloRetryRequest exchange; it is not reset with the
new ClientHello.
TLS also allows several optimized variants of the basic handshake, as
described in the following sections.
Rescorla Standards Track [Page 14]
RFC 8446 TLS August 2018
2.2.Resumption and Pre-Shared Key (PSK)
Although TLS PSKs can be established out of band, PSKs can also be
established in a previous connection and then used to establish a new
connection (session resumption or resuming with a PSK).Once a
handshake has completed, the server can send the client a PSK
identity that corresponds to a unique key derived from the initial
handshake (see Section 4.6.1).The client can then use that PSK
identity in future handshakes to negotiate the use of the associated
PSK.If the server accepts the PSK, then the security context of the
new connection is cryptographically tied to the original connection
and the key derived from the initial handshake is used to bootstrap
the cryptographic state instead of a full handshake.In TLS 1.2 and
below, this functionality was provided by session IDs and session
tickets [RFC5077].Both mechanisms are obsoleted in TLS 1.3.
PSKs can be used with (EC)DHE key exchange in order to provide
forward secrecy in combination with shared keys, or can be used
alone, at the cost of losing forward secrecy for the application
data.
Rescorla Standards Track [Page 15]
RFC 8446 TLS August 2018
Figure 3 shows a pair of handshakes in which the first handshake
establishes a PSK and the second handshake uses it:
Client
Initial Handshake:
ClientHello
+ key_share
{Certificate*}
{CertificateVerify*}
{Finished}
[Application Data]
Subsequent Handshake:
ClientHello
+ key_share*
+ pre_shared_key
Server
ServerHello
+ key_share
{EncryptedExtensions}
{CertificateRequest*}
{Certificate*}
{CertificateVerify*}
{Finished}
[Application Data*]
[NewSessionTicket]
[Application Data]
ServerHello
+ pre_shared_key
+ key_share*
{EncryptedExtensions}
{Finished}
[Application Data*]
[Application Data]
Figure 3: Message Flow for Resumption and PSK
{Finished}
[Application Data]
<—————->
<——->
>
<—————->
<——–<——->
>
As the server is authenticating via a PSK, it does not send a
Certificate or a CertificateVerify message.When a client offers
resumption via a PSK, it SHOULD also supply a key_share extension
to the server to allow the server to decline resumption and fall back
to a full handshake, if needed.The server responds with a
pre_shared_key extension to negotiate the use of PSK key
establishment and can (as shown here) respond with a key_share
extension to do (EC)DHE key establishment, thus providing forward
secrecy.
Rescorla Standards Track [Page 16]
RFC 8446 TLS August 2018
When PSKs are provisioned out of band, the PSK identity and the KDF
hash algorithm to be used with the PSK MUST also be provisioned.
Note:When using an out-of-band provisioned pre-shared secret, a
critical consideration is using sufficient entropy during the key
generation, as discussed in [RFC4086].Deriving a shared secret
from a password or other low-entropy sources is not secure.A
low-entropy secret, or password, is subject to dictionary attacks
based on the PSK binder.The specified PSK authentication is not
a strong password-based authenticated key exchange even when used
with Diffie-Hellman key establishment.Specifically, it does not
prevent an attacker that can observe the handshake from performing
a brute-force attack on the password/pre-shared key.
2.3.0-RTT Data
When clients and servers share a PSK (either obtained externally or
via a previous handshake), TLS 1.3 allows clients to send data on the
first flight (early data).The client uses the PSK to authenticate
the server and to encrypt the early data.
As shown in Figure 4, the 0-RTT data is just added to the 1-RTT
handshake in the first flight.The rest of the handshake uses the
same messages as for a 1-RTT handshake with PSK resumption.
Rescorla Standards Track [Page 17]
RFC 8446
TLS
August 2018
Rescorla
Standards Track [Page 18]
Client
Server
ServerHello
+ pre_shared_key
+ key_share*
{EncryptedExtensions}
+ early_data*
{Finished}
[Application Data*]
[Application Data]
ClientHello
+ early_data
+ key_share*
+ psk_key_exchange_modes
+ pre_shared_key
(Application Data*)
(EndOfEarlyData)
{Finished}
[Application Data]
<—————->
<——->
>
+Indicates noteworthy extensions sent in the
previously noted message.
*Indicates optional or situation-dependent
messages/extensions that are not always sent.
() Indicates messages protected using keys
derived from a client_early_traffic_secret.
{} Indicates messages protected using keys
derived from a [sender]_handshake_traffic_secret.
[] Indicates messages protected using keys
derived from [sender]_application_traffic_secret_N.
Figure 4: Message Flow for a 0-RTT Handshake
RFC 8446 TLS August 2018
IMPORTANT NOTE: The security properties for 0-RTT data are weaker
than those for other kinds of TLS data.Specifically:
1.This data is not forward secret, as it is encrypted solely under
keys derived using the offered PSK.
2.There are no guarantees of non-replay between connections.
Protection against replay for ordinary TLS 1.3 1-RTT data is
provided via the servers Random value, but 0-RTT data does not
depend on the ServerHello and therefore has weaker guarantees.
This is especially relevant if the data is authenticated either
with TLS client authentication or inside the application
protocol.The same warnings apply to any use of the
early_exporter_master_secret.
0-RTT data cannot be duplicated within a connection (i.e., the server
will not process the same data twice for the same connection), and an
attacker will not be able to make 0-RTT data appear to be 1-RTT data
(because it is protected with different keys).Appendix E.5 contains
a description of potential attacks, and Section 8 describes
mechanisms which the server can use to limit the impact of replay.
3.Presentation Language
This document deals with the formatting of data in an external
representation.The following very basic and somewhat casually
defined presentation syntax will be used.
3.1.Basic Block Size
The representation of all data items is explicitly specified.The
basic data block size is one byte (i.e., 8 bits).Multiple-byte data
items are concatenations of bytes, from left to right, from top to
bottom.From the byte stream, a multi-byte item (a numeric in the
following example) is formed (using C notation) by:
value = (byte[0] << 8*(n-1)) | (byte[1] << 8*(n-2)) |… | byte[n-1]; This byte ordering for multi-byte values is the commonplace network byte order or big-endian format.Rescorla Standards Track [Page 19]RFC 8446 TLS August 20183.2.Miscellaneous Comments begin with “/*” and end with “*/”. Optional components are denoted by enclosing them in “[[ ]]” (double brackets). Single-byte entities containing uninterpreted data are of type opaque. A type alias T for an existing type T is defined by:T T;3.3. Numbers The basic numeric data type is an unsigned byte (uint8).All larger numeric data types are constructed from a fixed-length series of bytes concatenated as described in Section 3.1 and are also unsigned. The following numeric types are predefined.uint8 uint16[2];uint8 uint24[3];uint8 uint32[4];uint8 uint64[8]; All values, here and elsewhere in the specification, are transmitted in network byte (big-endian) order; the uint32 represented by the hex bytes 01 02 03 04 is equivalent to the decimal value 16909060.3.4. Vectors A vector (single-dimensioned array) is a stream of homogeneous data elements.The size of the vector may be specified at documentation time or left unspecified until runtime.In either case, the length declares the number of bytes, not the number of elements, in the vector.The syntax for specifying a new type, T, that is a fixed- length vector of type T isT T[n]; Here, T occupies n bytes in the data stream, where n is a multiple of the size of T.The length of the vector is not included in the encoded stream.Rescorla Standards Track [Page 20]RFC 8446 TLS August 2018 In the following example, Datum is defined to be three consecutive bytes that the protocol does not interpret, while Data is three consecutive Datum, consuming a total of nine bytes.opaque Datum[3];/* three uninterpreted bytes */Datum Data[9];/* three consecutive 3-byte vectors */ Variable-length vectors are defined by specifying a subrange of legal lengths, inclusively, using the notation
these are encoded, the actual length precedes the vectors contents
in the byte stream.The length will be in the form of a number
consuming as many bytes as required to hold the vectors specified
maximum (ceiling) length.A variable-length vector with an actual
length field of zero is referred to as an empty vector.
T T
In the following example, mandatory is a vector that must contain
between 300 and 400 bytes of type opaque.It can never be empty.
The actual length field consumes two bytes, a uint16, which is
sufficient to represent the value 400 (see Section 3.3).Similarly,
longer can represent up to 800 bytes of data, or 400 uint16
elements, and it may be empty.Its encoding will include a two-byte
actual length field prepended to the vector.The length of an
encoded vector must be an exact multiple of the length of a single
element (e.g., a 17-byte vector of uint16 would be illegal).
opaque mandatory<300..400>;
/* length field is two bytes, cannot be empty */
uint16 longer<0..800>;
/* zero to 400 16-bit unsigned integers */
3.5.Enumerateds
An additional sparse data type, called enum or enumerated, is
available.Each definition is a different type.Only enumerateds of
the same type may be assigned or compared.Every element of an
enumerated must be assigned a value, as demonstrated in the following
example.Since the elements of the enumerated are not ordered, they
can be assigned any unique value, in any order.
enum { e1(v1), e2(v2), , en(vn) [[, (n)]] } Te;
Future extensions or additions to the protocol may define new values.
Implementations need to be able to parse and ignore unknown values
unless the definition of the field states otherwise.
Rescorla Standards Track [Page 21]
RFC 8446 TLS August 2018
An enumerated occupies as much space in the byte stream as would its
maximal defined ordinal value.The following definition would cause
one byte to be used to carry fields of type Color.
enum { red(3), blue(5), white(7) } Color;
One may optionally specify a value without its associated tag to
force the width definition without defining a superfluous element.
In the following example, Taste will consume two bytes in the data
stream but can only assume the values 1, 2, or 4 in the current
version of the protocol.
enum { sweet(1), sour(2), bitter(4), (32000) } Taste;
The names of the elements of an enumeration are scoped within the
defined type.In the first example, a fully qualified reference to
the second element of the enumeration would be Color.blue.Such
qualification is not required if the target of the assignment is well
specified.
Color color = Color.blue; /* overspecified, legal */
Color color = blue; /* correct, type implicit */
The names assigned to enumerateds do not need to be unique.The
numerical value can describe a range over which the same name
applies.The value includes the minimum and maximum inclusive values
in that range, separated by two period characters.This is
principally useful for reserving regions of the space.
enum { sad(0), meh(1..254), happy(255) } Mood;
3.6.Constructed Types
Structure types may be constructed from primitive types for
convenience.Each specification declares a new, unique type.The
syntax used for definitions is much like that of C.
struct {
T1 f1;
T2 f2;
Tn fn;
} T;
Fixed- and variable-length vector fields are allowed using the
standard vector syntax.Structures V1 and V2 in the variants example
(Section 3.8) demonstrate this.
Rescorla Standards Track [Page 22]
RFC 8446 TLS August 2018
The fields within a structure may be qualified using the types name,
with a syntax much like that available for enumerateds.For example,
T.f2 refers to the second field of the previous declaration.
3.7.Constants
Fields and variables may be assigned a fixed value using =, as in:
struct {
T1 f1 = 8;/* T.f1 must always be 8 */
T2 f2;
} T;
3.8.Variants
Defined structures may have variants based on some knowledge that is
available within the environment.The selector must be an enumerated
type that defines the possible variants the structure defines.Each
arm of the select (below) specifies the type of that variants field
and an optional field label.The mechanism by which the variant is
selected at runtime is not prescribed by the presentation language.
Rescorla
Standards Track
[Page 23]
struct {
T1 f1;
T2 f2;
.
Tn fn;
select (E) {
}; } Tv;
case e1: Te1 [[fe1]];
case e2: Te2 [[fe2]];
.
case en: Ten [[fen]];
RFC 8446 TLS August 2018
For example:
enum { apple(0), orange(1) } VariantTag;
struct {
uint16 number;
opaque string<0..10>; /* variable length */
} V1;
struct {
uint32 number;
opaque string[10];
} V2;
struct {
VariantTag type;
/* fixed length */
select (VariantRecord.type) {
case apple:V1;
case orange: V2;
};
} VariantRecord;
4.Handshake Protocol
The handshake protocol is used to negotiate the security parameters
of a connection.Handshake messages are supplied to the TLS record
layer, where they are encapsulated within one or more TLSPlaintext or
TLSCiphertext structures which are processed and transmitted as
specified by the current active connection state.
Rescorla Standards Track [Page 24]
RFC 8446 TLS
August 2018
enum {
client_hello(1),
server_hello(2),
new_session_ticket(4),
end_of_early_data(5),
encrypted_extensions(8),
certificate(11),
certificate_request(13),
certificate_verify(15),
finished(20),
key_update(24),
message_hash(254),
(255)
} HandshakeType;
struct {
HandshakeType msg_type;/* handshake type */
uint24 length;
select (Handshake.msg_type) {
case client_hello:
case server_hello:
case end_of_early_data:
case encrypted_extensions:EncryptedExtensions;
case certificate_request:
case certificate:
case certificate_verify:
case finished:
case new_session_ticket:
case key_update:
};
} Handshake;
CertificateRequest;
Certificate;
CertificateVerify;
Finished;
NewSessionTicket;
KeyUpdate;
Protocol messages MUST be sent in the order defined in Section 4.4.1
and shown in the diagrams in Section 2.A peer which receives a
handshake message in an unexpected order MUST abort the handshake
with an unexpected_message alert.
New handshake message types are assigned by IANA as described in
Section 11.
4.1.Key Exchange Messages
The key exchange messages are used to determine the security
capabilities of the client and the server and to establish shared
secrets, including the traffic keys used to protect the rest of the
handshake and the data.
Rescorla Standards Track [Page 25]
/* remaining bytes in message */
ClientHello;
ServerHello;
EndOfEarlyData;
RFC 8446 TLS August 2018
4.1.1.Cryptographic Negotiation
In TLS, the cryptographic negotiation proceeds by the client offering
the following four sets of options in its ClientHello:
A list of cipher suites which indicates the AEAD algorithm/HKDF
hash pairs which the client supports.
A supported_groups (Section 4.2.7) extension which indicates the
(EC)DHE groups which the client supports and a key_share
(Section 4.2.8) extension which contains (EC)DHE shares for some
or all of these groups.
A signature_algorithms (Section 4.2.3) extension which indicates
the signature algorithms which the client can accept.A
signature_algorithms_cert extension (Section 4.2.3) may also be
added to indicate certificate-specific signature algorithms.
A pre_shared_key (Section 4.2.11) extension which contains a
list of symmetric key identities known to the client and a
psk_key_exchange_modes (Section 4.2.9) extension which indicates
the key exchange modes that may be used with PSKs.
If the server does not select a PSK, then the first three of these
options are entirely orthogonal: the server independently selects a
cipher suite, an (EC)DHE group and key share for key establishment,
and a signature algorithm/certificate pair to authenticate itself to
the client.If there is no overlap between the received
supported_groups and the groups supported by the server, then the
server MUST abort the handshake with a handshake_failure or an
insufficient_security alert.
If the server selects a PSK, then it MUST also select a key
establishment mode from the set indicated by the clients
psk_key_exchange_modes extension (at present, PSK alone or with
(EC)DHE).Note that if the PSK can be used without (EC)DHE, then
non-overlap in the supported_groups parameters need not be fatal,
as it is in the non-PSK case discussed in the previous paragraph.
If the server selects an (EC)DHE group and the client did not offer a
compatible key_share extension in the initial ClientHello, the
server MUST respond with a HelloRetryRequest (Section 4.1.4) message.
Rescorla Standards Track [Page 26]
RFC 8446 TLS August 2018
If the server successfully selects parameters and does not require a
HelloRetryRequest, it indicates the selected parameters in the
ServerHello as follows:
If PSK is being used, then the server will send a pre_shared_key
extension indicating the selected key.
When (EC)DHE is in use, the server will also provide a key_share
extension.If PSK is not being used, then (EC)DHE and
certificate-based authentication are always used.
When authenticating via a certificate, the server will send the
Certificate (Section 4.4.2) and CertificateVerify (Section 4.4.3)
messages.In TLS 1.3 as defined by this document, either a PSK or
a certificate is always used, but not both.Future documents may
define how to use them together.
If the server is unable to negotiate a supported set of parameters
(i.e., there is no overlap between the client and server parameters),
it MUST abort the handshake with either a handshake_failure or
insufficient_security fatal alert (see Section 6).
4.1.2.Client Hello
When a client first connects to a server, it is REQUIRED to send the
ClientHello as its first TLS message.The client will also send a
ClientHello when the server has responded to its ClientHello with a
HelloRetryRequest.In that case, the client MUST send the same
ClientHello without modification, except as follows:
If a key_share extension was supplied in the HelloRetryRequest,
replacing the list of shares with a list containing a single
KeyShareEntry from the indicated group.
Removing the early_data extension (Section 4.2.10) if one was
present.Early data is not permitted after a HelloRetryRequest.
Including a cookie extension if one was provided in the
HelloRetryRequest.
Rescorla Standards Track [Page 27]
RFC 8446 TLS August 2018
Updating the pre_shared_key extension if present by recomputing
the obfuscated_ticket_age and binder values and (optionally)
removing any PSKs which are incompatible with the servers
indicated cipher suite.
Optionally adding, removing, or changing the length of the
padding extension [RFC7685].
Other modifications that may be allowed by an extension defined in
the future and present in the HelloRetryRequest.
Because TLS 1.3 forbids renegotiation, if a server has negotiated
TLS 1.3 and receives a ClientHello at any other time, it MUST
terminate the connection with an unexpected_message alert.
If a server established a TLS connection with a previous version of
TLS and receives a TLS 1.3 ClientHello in a renegotiation, it MUST
retain the previous protocol version.In particular, it MUST NOT
negotiate TLS 1.3.
Structure of this message:
uint16 ProtocolVersion;
opaque Random[32];
uint8 CipherSuite[2];
/* Cryptographic suite selector */
struct {
ProtocolVersion legacy_version = 0x0303;/* TLS v1.2 */
Random random;
opaque legacy_session_id<0..32>;
CipherSuite cipher_suites<2..2^16-2>;
opaque legacy_compression_methods<1..2^8-1>;
Extension extensions<8..2^16-1>;
} ClientHello;
Rescorla Standards Track [Page 28]
RFC 8446 TLS August 2018
legacy_version:In previous versions of TLS, this field was used for
version negotiation and represented the highest version number
supported by the client.Experience has shown that many servers
do not properly implement version negotiation, leading to version
intolerance in which the server rejects an otherwise acceptable
ClientHello with a version number higher than it supports.In
TLS 1.3, the client indicates its version preferences in the
supported_versions extension (Section 4.2.1) and the
legacy_version field MUST be set to 0x0303, which is the version
number for TLS 1.2.TLS 1.3 ClientHellos are identified as having
a legacy_version of 0x0303 and a supported_versions extension
present with 0x0304 as the highest version indicated therein.
(See Appendix D for details about backward compatibility.)
random:32 bytes generated by a secure random number generator.See
Appendix C for additional information.
legacy_session_id:Versions of TLS before TLS 1.3 supported a
session resumption feature which has been merged with pre-shared
keys in this version (see Section 2.2).A client which has a
cached session ID set by a pre-TLS 1.3 server SHOULD set this
field to that value.In compatibility mode (see Appendix D.4),
this field MUST be non-empty, so a client not offering a
pre-TLS 1.3 session MUST generate a new 32-byte value.This value
need not be random but SHOULD be unpredictable to avoid
implementations fixating on a specific value (also known as
ossification).Otherwise, it MUST be set as a zero-length vector
(i.e., a zero-valued single byte length field).
cipher_suites:A list of the symmetric cipher options supported by
the client, specifically the record protection algorithm
(including secret key length) and a hash to be used with HKDF, in
descending order of client preference.Values are defined in
Appendix B.4.If the list contains cipher suites that the server
does not recognize, support, or wish to use, the server MUST
ignore those cipher suites and process the remaining ones as
usual.If the client is attempting a PSK key establishment, it
SHOULD advertise at least one cipher suite indicating a Hash
associated with the PSK.
Rescorla Standards Track [Page 29]
RFC 8446 TLS August 2018
legacy_compression_methods:Versions of TLS before 1.3 supported
compression with the list of supported compression methods being
sent in this field.For every TLS 1.3 ClientHello, this vector
MUST contain exactly one byte, set to zero, which corresponds to
the null compression method in prior versions of TLS.If a
TLS 1.3 ClientHello is received with any other value in this
field, the server MUST abort the handshake with an
illegal_parameter alert.Note that TLS 1.3 servers might
receive TLS 1.2 or prior ClientHellos which contain other
compression methods and (if negotiating such a prior version) MUST
follow the procedures for the appropriate prior version of TLS.
extensions:Clients request extended functionality from servers by
sending data in the extensions field.The actual Extension
format is defined in Section 4.2.In TLS 1.3, the use of certain
extensions is mandatory, as functionality has moved into
extensions to preserve ClientHello compatibility with previous
versions of TLS.Servers MUST ignore unrecognized extensions.
All versions of TLS allow an extensions field to optionally follow
the compression_methods field.TLS 1.3 ClientHello messages always
contain extensions (minimally supported_versions, otherwise, they
will be interpreted as TLS 1.2 ClientHello messages).However,
TLS 1.3 servers might receive ClientHello messages without an
extensions field from prior versions of TLS.The presence of
extensions can be detected by determining whether there are bytes
following the compression_methods field at the end of the
ClientHello.Note that this method of detecting optional data
differs from the normal TLS method of having a variable-length field,
but it is used for compatibility with TLS before extensions were
defined.TLS 1.3 servers will need to perform this check first and
only attempt to negotiate TLS 1.3 if the supported_versions
extension is present.If negotiating a version of TLS prior to 1.3,
a server MUST check that the message either contains no data after
legacy_compression_methods or that it contains a valid extensions
block with no data following.If not, then it MUST abort the
handshake with a decode_error alert.
In the event that a client requests additional functionality using
extensions and this functionality is not supplied by the server, the
client MAY abort the handshake.
After sending the ClientHello message, the client waits for a
ServerHello or HelloRetryRequest message.If early data is in use,
the client may transmit early Application Data (Section 2.3) while
waiting for the next handshake message.
Rescorla Standards Track [Page 30]
RFC 8446 TLS August 2018
4.1.3.Server Hello
The server will send this message in response to a ClientHello
message to proceed with the handshake if it is able to negotiate an
acceptable set of handshake parameters based on the ClientHello.
Structure of this message:
struct {
ProtocolVersion legacy_version = 0x0303;
Random random;
opaque legacy_session_id_echo<0..32>;
CipherSuite cipher_suite;
uint8 legacy_compression_method = 0;
Extension extensions<6..2^16-1>;
} ServerHello;
/* TLS v1.2 */
legacy_version:In previous versions of TLS, this field was used for
version negotiation and represented the selected version number
for the connection.Unfortunately, some middleboxes fail when
presented with new values.In TLS 1.3, the TLS server indicates
its version using the supported_versions extension
(Section 4.2.1), and the legacy_version field MUST be set to
0x0303, which is the version number for TLS 1.2.(See Appendix D
for details about backward compatibility.)
random:32 bytes generated by a secure random number generator.See
Appendix C for additional information.The last 8 bytes MUST be
overwritten as described below if negotiating TLS 1.2 or TLS 1.1,
but the remaining bytes MUST be random.This structure is
generated by the server and MUST be generated independently of the
ClientHello.random.
legacy_session_id_echo:The contents of the clients
legacy_session_id field.Note that this field is echoed even if
the clients value corresponded to a cached pre-TLS 1.3 session
which the server has chosen not to resume.A client which
receives a legacy_session_id_echo field that does not match what
it sent in the ClientHello MUST abort the handshake with an
illegal_parameter alert.
cipher_suite:The single cipher suite selected by the server from
the list in ClientHello.cipher_suites.A client which receives a
cipher suite that was not offered MUST abort the handshake with an
illegal_parameter alert.
legacy_compression_method:A single byte which MUST have the
value 0.
Rescorla Standards Track [Page 31]
RFC 8446 TLS August 2018
extensions:A list of extensions.The ServerHello MUST only include
extensions which are required to establish the cryptographic
context and negotiate the protocol version.All TLS 1.3
ServerHello messages MUST contain the supported_versions
extension.Current ServerHello messages additionally contain
either the pre_shared_key extension or the key_share
extension, or both (when using a PSK with (EC)DHE key
establishment).Other extensions (see Section 4.2) are sent
separately in the EncryptedExtensions message.
For reasons of backward compatibility with middleboxes (see
Appendix D.4), the HelloRetryRequest message uses the same structure
as the ServerHello, but with Random set to the special value of the
SHA-256 of HelloRetryRequest:
CF 21 AD 74 E5 9A 61 11 BE 1D 8C 02 1E 65 B8 91
C2 A2 11 16 7A BB 8C 5E 07 9E 09 E2 C8 A8 33 9C
Upon receiving a message with type server_hello, implementations MUST
first examine the Random value and, if it matches this value, process
it as described in Section 4.1.4).
TLS 1.3 has a downgrade protection mechanism embedded in the servers
random value.TLS 1.3 servers which negotiate TLS 1.2 or below in
response to a ClientHello MUST set the last 8 bytes of their Random
value specially in their ServerHello.
If negotiating TLS 1.2, TLS 1.3 servers MUST set the last 8 bytes of
their Random value to the bytes:
44 4F 57 4E 47 52 44 01
If negotiating TLS 1.1 or below, TLS 1.3 servers MUST, and TLS 1.2
servers SHOULD, set the last 8 bytes of their ServerHello.Random
value to the bytes:
44 4F 57 4E 47 52 44 00
TLS 1.3 clients receiving a ServerHello indicating TLS 1.2 or below
MUST check that the last 8 bytes are not equal to either of these
values.TLS 1.2 clients SHOULD also check that the last 8 bytes are
not equal to the second value if the ServerHello indicates TLS 1.1 or
below.If a match is found, the client MUST abort the handshake with
an illegal_parameter alert.This mechanism provides limited
protection against downgrade attacks over and above what is provided
by the Finished exchange: because the ServerKeyExchange, a message
present in TLS 1.2 and below, includes a signature over both random
values, it is not possible for an active attacker to modify the
Rescorla Standards Track [Page 32]
RFC 8446 TLS August 2018
random values without detection as long as ephemeral ciphers are
used.It does not provide downgrade protection when static RSA
is used.
Note: This is a change from [RFC5246], so in practice many TLS 1.2
clients and servers will not behave as specified above.
A legacy TLS client performing renegotiation with TLS 1.2 or prior
and which receives a TLS 1.3 ServerHello during renegotiation MUST
abort the handshake with a protocol_version alert.Note that
renegotiation is not possible when TLS 1.3 has been negotiated.
4.1.4.Hello Retry Request
The server will send this message in response to a ClientHello
message if it is able to find an acceptable set of parameters but the
ClientHello does not contain sufficient information to proceed with
the handshake.As discussed in Section 4.1.3, the HelloRetryRequest
has the same format as a ServerHello message, and the legacy_version,
legacy_session_id_echo, cipher_suite, and legacy_compression_method
fields have the same meaning.However, for convenience we discuss
HelloRetryRequest throughout this document as if it were a distinct
message.
The servers extensions MUST contain supported_versions.
Additionally, it SHOULD contain the minimal set of extensions
necessary for the client to generate a correct ClientHello pair.As
with the ServerHello, a HelloRetryRequest MUST NOT contain any
extensions that were not first offered by the client in its
ClientHello, with the exception of optionally the cookie (see
Section 4.2.2) extension.
Upon receipt of a HelloRetryRequest, the client MUST check the
legacy_version, legacy_session_id_echo, cipher_suite, and
legacy_compression_method as specified in Section 4.1.3 and then
process the extensions, starting with determining the version using
supported_versions.Clients MUST abort the handshake with an
illegal_parameter alert if the HelloRetryRequest would not result
in any change in the ClientHello.If a client receives a second
HelloRetryRequest in the same connection (i.e., where the ClientHello
was itself in response to a HelloRetryRequest), it MUST abort the
handshake with an unexpected_message alert.
Rescorla Standards Track [Page 33]
RFC 8446 TLS August 2018
Otherwise, the client MUST process all extensions in the
HelloRetryRequest and send a second updated ClientHello.The
HelloRetryRequest extensions defined in this specification are:
supported_versions (see Section 4.2.1)
cookie (see Section 4.2.2)
key_share (see Section 4.2.8)
A client which receives a cipher suite that was not offered MUST
abort the handshake.Servers MUST ensure that they negotiate the
same cipher suite when receiving a conformant updated ClientHello (if
the server selects the cipher suite as the first step in the
negotiation, then this will happen automatically).Upon receiving
the ServerHello, clients MUST check that the cipher suite supplied in
the ServerHello is the same as that in the HelloRetryRequest and
otherwise abort the handshake with an illegal_parameter alert.
In addition, in its updated ClientHello, the client SHOULD NOT offer
any pre-shared keys associated with a hash other than that of the
selected cipher suite.This allows the client to avoid having to
compute partial hash transcripts for multiple hashes in the second
ClientHello.
The value of selected_version in the HelloRetryRequest
supported_versions extension MUST be retained in the ServerHello,
and a client MUST abort the handshake with an illegal_parameter
alert if the value changes.
Rescorla Standards Track [Page 34]
RFC 8446 TLS August 2018
4.2.Extensions
A number of TLS messages contain tag-length-value encoded extensions
structures.
struct {
ExtensionType extension_type;
opaque extension_data<0..2^16-1>;
} Extension;
enum {
server_name(0),
max_fragment_length(1),
status_request(5),
supported_groups(10),
signature_algorithms(13),
use_srtp(14),
heartbeat(15),
application_layer_protocol_negotiation(16), /* RFC 7301 */
signed_certificate_timestamp(18),
client_certificate_type(19),
server_certificate_type(20),
padding(21),
pre_shared_key(41),
early_data(42),
supported_versions(43),
cookie(44),
psk_key_exchange_modes(45),
certificate_authorities(47),
oid_filters(48),
post_handshake_auth(49),
signature_algorithms_cert(50),
key_share(51),
(65535)
} ExtensionType;
/* RFC 6962 */
/* RFC 7250 */
/* RFC 7250 */
/* RFC 7685 */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
Rescorla Standards Track
[Page 35]
/* RFC 6066 */
/* RFC 6066 */
/* RFC 6066 */
/* RFC 8422, 7919 */
/* RFC 8446 */
/* RFC 5764 */
/* RFC 6520 */
RFC 8446 TLS August 2018
Here:
extension_type identifies the particular extension type.
extension_data contains information specific to the particular
extension type.
The list of extension types is maintained by IANA as described in
Section 11.
Extensions are generally structured in a request/response fashion,
though some extensions are just indications with no corresponding
response.The client sends its extension requests in the ClientHello
message, and the server sends its extension responses in the
ServerHello, EncryptedExtensions, HelloRetryRequest, and Certificate
messages.The server sends extension requests in the
CertificateRequest message which a client MAY respond to with a
Certificate message.The server MAY also send unsolicited extensions
in the NewSessionTicket, though the client does not respond directly
to these.
Implementations MUST NOT send extension responses if the remote
endpoint did not send the corresponding extension requests, with the
exception of the cookie extension in the HelloRetryRequest.Upon
receiving such an extension, an endpoint MUST abort the handshake
with an unsupported_extension alert.
The table below indicates the messages where a given extension may
appear, using the following notation: CH (ClientHello),
SH (ServerHello), EE (EncryptedExtensions), CT (Certificate),
CR (CertificateRequest), NST (NewSessionTicket), and
HRR (HelloRetryRequest).If an implementation receives an extension
which it recognizes and which is not specified for the message in
which it appears, it MUST abort the handshake with an
illegal_parameter alert.
Rescorla Standards Track [Page 36]
RFC 8446 TLS August 2018
++-+ | Extension | TLS 1.3 | ++-+ | server_name [RFC6066] | CH, EE | ||| | max_fragment_length [RFC6066] | CH, EE | ||| | status_request [RFC6066] | CH, CR, CT | ||| | supported_groups [RFC7919] | CH, EE | ||| | signature_algorithms (RFC 8446) | CH, CR | ||| | use_srtp [RFC5764] | CH, EE | ||| | heartbeat [RFC6520] | CH, EE | ||| | application_layer_protocol_negotiation [RFC7301] | CH, EE | ||| | signed_certificate_timestamp [RFC6962] | CH, CR, CT | ||| | client_certificate_type [RFC7250] | CH, EE | ||| | server_certificate_type [RFC7250] | CH, EE | ||| | padding [RFC7685] | CH | ||| | key_share (RFC 8446) | CH, SH, HRR | ||| | pre_shared_key (RFC 8446) | CH, SH | ||| | psk_key_exchange_modes (RFC 8446) | CH | ||| | early_data (RFC 8446) | CH, EE, NST | ||| | cookie (RFC 8446) | CH, HRR | ||| | supported_versions (RFC 8446) | CH, SH, HRR | ||| | certificate_authorities (RFC 8446) | CH, CR | ||| | oid_filters (RFC 8446) | CR | ||| | post_handshake_auth (RFC 8446) | CH | ||| | signature_algorithms_cert (RFC 8446) | CH, CR | ++-+
Rescorla Standards Track [Page 37]
RFC 8446 TLS August 2018
When multiple extensions of different types are present, the
extensions MAY appear in any order, with the exception of
pre_shared_key (Section 4.2.11) which MUST be the last extension in
the ClientHello (but can appear anywhere in the ServerHello
extensions block).There MUST NOT be more than one extension of the
same type in a given extension block.
In TLS 1.3, unlike TLS 1.2, extensions are negotiated for each
handshake even when in resumption-PSK mode.However, 0-RTT
parameters are those negotiated in the previous handshake; mismatches
may require rejecting 0-RTT (see Section 4.2.10).
There are subtle (and not so subtle) interactions that may occur in
this protocol between new features and existing features which may
result in a significant reduction in overall security.The following
considerations should be taken into account when designing new
extensions:
Some cases where a server does not agree to an extension are error
conditions (e.g., the handshake cannot continue), and some are
simply refusals to support particular features.In general, error
alerts should be used for the former and a field in the server
extension response for the latter.
Extensions should, as far as possible, be designed to prevent any
attack that forces use (or non-use) of a particular feature by
manipulation of handshake messages.This principle should be
followed regardless of whether the feature is believed to cause a
security problem.Often the fact that the extension fields are
included in the inputs to the Finished message hashes will be
sufficient, but extreme care is needed when the extension changes
the meaning of messages sent in the handshake phase.Designers
and implementors should be aware of the fact that until the
handshake has been authenticated, active attackers can modify
messages and insert, remove, or replace extensions.
Rescorla Standards Track [Page 38]
RFC 8446 TLS August 2018
4.2.1.Supported Versions
struct {
select (Handshake.msg_type) {
case client_hello:
ProtocolVersion versions<2..254>;
case server_hello: /* and HelloRetryRequest */
ProtocolVersion selected_version;
};
} SupportedVersions;
The supported_versions extension is used by the client to indicate
which versions of TLS it supports and by the server to indicate which
version it is using.The extension contains a list of supported
versions in preference order, with the most preferred version first.
Implementations of this specification MUST send this extension in the
ClientHello containing all versions of TLS which they are prepared to
negotiate (for this specification, that means minimally 0x0304, but
if previous versions of TLS are allowed to be negotiated, they MUST
be present as well).
If this extension is not present, servers which are compliant with
this specification and which also support TLS 1.2 MUST negotiate
TLS 1.2 or prior as specified in [RFC5246], even if
ClientHello.legacy_version is 0x0304 or later.Servers MAY abort the
handshake upon receiving a ClientHello with legacy_version 0x0304 or
later.
If this extension is present in the ClientHello, servers MUST NOT use
the ClientHello.legacy_version value for version negotiation and MUST
use only the supported_versions extension to determine client
preferences.Servers MUST only select a version of TLS present in
that extension and MUST ignore any unknown versions that are present
in that extension.Note that this mechanism makes it possible to
negotiate a version prior to TLS 1.2 if one side supports a sparse
range.Implementations of TLS 1.3 which choose to support prior
versions of TLS SHOULD support TLS 1.2.Servers MUST be prepared to
receive ClientHellos that include this extension but do not include
0x0304 in the list of versions.
A server which negotiates a version of TLS prior to TLS 1.3 MUST set
ServerHello.version and MUST NOT send the supported_versions
extension.A server which negotiates TLS 1.3 MUST respond by sending
a supported_versions extension containing the selected version
value (0x0304).It MUST set the ServerHello.legacy_version field to
0x0303 (TLS 1.2).Clients MUST check for this extension prior to
processing the rest of the ServerHello (although they will have to
Rescorla Standards Track [Page 39]
RFC 8446 TLS August 2018
parse the ServerHello in order to read the extension).If this
extension is present, clients MUST ignore the
ServerHello.legacy_version value and MUST use only the
supported_versions extension to determine the selected version.If
the supported_versions extension in the ServerHello contains a
version not offered by the client or contains a version prior to
TLS 1.3, the client MUST abort the handshake with an
illegal_parameter alert.
4.2.2.Cookie
struct {
opaque cookie<1..2^16-1>;
} Cookie;
Cookies serve two primary purposes:
Allowing the server to force the client to demonstrate
reachability at their apparent network address (thus providing a
measure of DoS protection).This is primarily useful for
non-connection-oriented transports (see [RFC6347] for an example
of this).
Allowing the server to offload state to the client, thus allowing
it to send a HelloRetryRequest without storing any state.The
server can do this by storing the hash of the ClientHello in the
HelloRetryRequest cookie (protected with some suitable integrity
protection algorithm).
When sending a HelloRetryRequest, the server MAY provide a cookie
extension to the client (this is an exception to the usual rule that
the only extensions that may be sent are those that appear in the
ClientHello).When sending the new ClientHello, the client MUST copy
the contents of the extension received in the HelloRetryRequest into
a cookie extension in the new ClientHello.Clients MUST NOT use
cookies in their initial ClientHello in subsequent connections.
When a server is operating statelessly, it may receive an unprotected
record of type change_cipher_spec between the first and second
ClientHello (see Section 5).Since the server is not storing any
state, this will appear as if it were the first message to be
received.Servers operating statelessly MUST ignore these records.
Rescorla Standards Track [Page 40]
RFC 8446 TLS August 2018
4.2.3.Signature Algorithms
TLS 1.3 provides two extensions for indicating which signature
algorithms may be used in digital signatures.The
signature_algorithms_cert extension applies to signatures in
certificates, and the signature_algorithms extension, which
originally appeared in TLS 1.2, applies to signatures in
CertificateVerify messages.The keys found in certificates MUST also
be of appropriate type for the signature algorithms they are used
with.This is a particular issue for RSA keys and PSS signatures, as
described below.If no signature_algorithms_cert extension is
present, then the signature_algorithms extension also applies to
signatures appearing in certificates.Clients which desire the
server to authenticate itself via a certificate MUST send the
signature_algorithms extension.If a server is authenticating via
a certificate and the client has not sent a signature_algorithms
extension, then the server MUST abort the handshake with a
missing_extension alert (see Section 9.2).
The signature_algorithms_cert extension was added to allow
implementations which supported different sets of algorithms for
certificates and in TLS itself to clearly signal their capabilities.
TLS 1.2 implementations SHOULD also process this extension.
Implementations which have the same policy in both cases MAY omit the
signature_algorithms_cert extension.
Rescorla Standards Track [Page 41]
RFC 8446 TLS August 2018
The extension_data field of these extensions contains a
SignatureSchemeList value:
enum {
/* RSASSA-PKCS1-v1_5 algorithms */
rsa_pkcs1_sha256(0x0401),
rsa_pkcs1_sha384(0x0501),
rsa_pkcs1_sha512(0x0601),
/* ECDSA algorithms */
ecdsa_secp256r1_sha256(0x0403),
ecdsa_secp384r1_sha384(0x0503),
ecdsa_secp521r1_sha512(0x0603),
/* RSASSA-PSS algorithms with public key OID rsaEncryption */
rsa_pss_rsae_sha256(0x0804),
rsa_pss_rsae_sha384(0x0805),
rsa_pss_rsae_sha512(0x0806),
/* EdDSA algorithms */
ed25519(0x0807),
ed448(0x0808),
/* RSASSA-PSS algorithms with public key OID RSASSA-PSS */
rsa_pss_pss_sha256(0x0809),
rsa_pss_pss_sha384(0x080a),
rsa_pss_pss_sha512(0x080b),
/* Legacy algorithms */
rsa_pkcs1_sha1(0x0201),
ecdsa_sha1(0x0203),
/* Reserved Code Points */
private_use(0xFE00..0xFFFF),
(0xFFFF)
} SignatureScheme;
struct {
SignatureScheme supported_signature_algorithms<2..2^16-2>;
} SignatureSchemeList;
Note: This enum is named SignatureScheme because there is already a
SignatureAlgorithm type in TLS 1.2, which this replaces.We use
the term signature algorithm throughout the text.
Rescorla Standards Track [Page 42]
RFC 8446 TLS August 2018
Each SignatureScheme value lists a single signature algorithm that
the client is willing to verify.The values are indicated in
descending order of preference.Note that a signature algorithm
takes as input an arbitrary-length message, rather than a digest.
Algorithms which traditionally act on a digest should be defined in
TLS to first hash the input with a specified hash algorithm and then
proceed as usual.The code point groups listed above have the
following meanings:
RSASSA-PKCS1-v1_5 algorithms:Indicates a signature algorithm using
RSASSA-PKCS1-v1_5 [RFC8017] with the corresponding hash algorithm
as defined in [SHS].These values refer solely to signatures
which appear in certificates (see Section 4.4.2.2) and are not
defined for use in signed TLS handshake messages, although they
MAY appear in signature_algorithms and
signature_algorithms_cert for backward compatibility with
TLS 1.2.
ECDSA algorithms:Indicates a signature algorithm using ECDSA
[ECDSA], the corresponding curve as defined in ANSI X9.62 [ECDSA]
and FIPS 186-4 [DSS], and the corresponding hash algorithm as
defined in [SHS].The signature is represented as a DER-encoded
[X690] ECDSA-Sig-Value structure.
RSASSA-PSS RSAE algorithms:Indicates a signature algorithm using
RSASSA-PSS [RFC8017] with mask generation function 1.The digest
used in the mask generation function and the digest being signed
are both the corresponding hash algorithm as defined in [SHS].
The length of the Salt MUST be equal to the length of the output
of the digest algorithm.If the public key is carried in an X.509
certificate, it MUST use the rsaEncryption OID [RFC5280].
EdDSA algorithms:Indicates a signature algorithm using EdDSA as
defined in [RFC8032] or its successors.Note that these
correspond to the PureEdDSA algorithms and not the prehash
variants.
RSASSA-PSS PSS algorithms:Indicates a signature algorithm using
RSASSA-PSS [RFC8017] with mask generation function 1.The digest
used in the mask generation function and the digest being signed
are both the corresponding hash algorithm as defined in [SHS].
The length of the Salt MUST be equal to the length of the digest
algorithm.If the public key is carried in an X.509 certificate,
it MUST use the RSASSA-PSS OID [RFC5756].When used in
certificate signatures, the algorithm parameters MUST be DER
encoded.If the corresponding public keys parameters are
present, then the parameters in the signature MUST be identical to
those in the public key.
Rescorla Standards Track [Page 43]
RFC 8446 TLS August 2018
Legacy algorithms:Indicates algorithms which are being deprecated
because they use algorithms with known weaknesses, specifically
SHA-1 which is used in this context with either (1) RSA using
RSASSA-PKCS1-v1_5 or (2) ECDSA.These values refer solely to
signatures which appear in certificates (see Section 4.4.2.2) and
are not defined for use in signed TLS handshake messages, although
they MAY appear in signature_algorithms and
signature_algorithms_cert for backward compatibility with
TLS 1.2.Endpoints SHOULD NOT negotiate these algorithms but are
permitted to do so solely for backward compatibility.Clients
offering these values MUST list them as the lowest priority
(listed after all other algorithms in SignatureSchemeList).
TLS 1.3 servers MUST NOT offer a SHA-1 signed certificate unless
no valid certificate chain can be produced without it (see
Section 4.4.2.2).
The signatures on certificates that are self-signed or certificates
that are trust anchors are not validated, since they begin a
certification path (see [RFC5280], Section 3.2).A certificate that
begins a certification path MAY use a signature algorithm that is not
advertised as being supported in the signature_algorithms
extension.
Note that TLS 1.2 defines this extension differently.TLS 1.3
implementations willing to negotiate TLS 1.2 MUST behave in
accordance with the requirements of [RFC5246] when negotiating that
version.In particular:
TLS 1.2 ClientHellos MAY omit this extension.
In TLS 1.2, the extension contained hash/signature pairs.The
pairs are encoded in two octets, so SignatureScheme values have
been allocated to align with TLS 1.2s encoding.Some legacy
pairs are left unallocated.These algorithms are deprecated as of
TLS 1.3.They MUST NOT be offered or negotiated by any
implementation.In particular, MD5 [SLOTH], SHA-224, and DSA
MUST NOT be used.
ECDSA signature schemes align with TLS 1.2s ECDSA hash/signature
pairs.However, the old semantics did not constrain the signing
curve.If TLS 1.2 is negotiated, implementations MUST be prepared
to accept a signature that uses any curve that they advertised in
the supported_groups extension.
Implementations that advertise support for RSASSA-PSS (which is
mandatory in TLS 1.3) MUST be prepared to accept a signature using
that scheme even when TLS 1.2 is negotiated.In TLS 1.2,
RSASSA-PSS is used with RSA cipher suites.
Rescorla Standards Track [Page 44]
RFC 8446 TLS August 2018
4.2.4.Certificate Authorities
The certificate_authorities extension is used to indicate the
certificate authorities (CAs) which an endpoint supports and which
SHOULD be used by the receiving endpoint to guide certificate
selection.
The body of the certificate_authorities extension consists of a
CertificateAuthoritiesExtension structure.
opaque DistinguishedName<1..2^16-1>;
struct {
DistinguishedName authorities<3..2^16-1>;
} CertificateAuthoritiesExtension;
authorities:A list of the distinguished names [X501] of acceptable
certificate authorities, represented in DER-encoded [X690] format.
These distinguished names specify a desired distinguished name for
a trust anchor or subordinate CA; thus, this message can be used
to describe known trust anchors as well as a desired authorization
space.
The client MAY send the certificate_authorities extension in the
ClientHello message.The server MAY send it in the
CertificateRequest message.
The trusted_ca_keys extension [RFC6066], which serves a similar
purpose but is more complicated, is not used in TLS 1.3 (although it
may appear in ClientHello messages from clients which are offering
prior versions of TLS).
4.2.5.OID Filters
The oid_filters extension allows servers to provide a set of
OID/value pairs which it would like the clients certificate to
match.This extension, if provided by the server, MUST only be sent
in the CertificateRequest message.
struct {
opaque certificate_extension_oid<1..2^8-1>;
opaque certificate_extension_values<0..2^16-1>;
} OIDFilter;
struct {
OIDFilter filters<0..2^16-1>;
} OIDFilterExtension;
Rescorla Standards Track [Page 45]
RFC 8446 TLS August 2018
filters:A list of certificate extension OIDs [RFC5280] with their
allowed value(s) and represented in DER-encoded [X690] format.
Some certificate extension OIDs allow multiple values (e.g.,
Extended Key Usage).If the server has included a non-empty
filters list, the client certificate included in the response MUST
contain all of the specified extension OIDs that the client
recognizes.For each extension OID recognized by the client, all
of the specified values MUST be present in the client certificate
(but the certificate MAY have other values as well).However, the
client MUST ignore and skip any unrecognized certificate extension
OIDs.If the client ignored some of the required certificate
extension OIDs and supplied a certificate that does not satisfy
the request, the server MAY at its discretion either continue the
connection without client authentication or abort the handshake
with an unsupported_certificate alert.Any given OID MUST NOT
appear more than once in the filters list.
PKIX RFCs define a variety of certificate extension OIDs and their
corresponding value types.Depending on the type, matching
certificate extension values are not necessarily bitwise-equal.It
is expected that TLS implementations will rely on their PKI libraries
to perform certificate selection using certificate extension OIDs.
This document defines matching rules for two standard certificate
extensions defined in [RFC5280]:
The Key Usage extension in a certificate matches the request when
all key usage bits asserted in the request are also asserted in
the Key Usage certificate extension.
The Extended Key Usage extension in a certificate matches the
request when all key purpose OIDs present in the request are also
found in the Extended Key Usage certificate extension.The
special anyExtendedKeyUsage OID MUST NOT be used in the request.
Separate specifications may define matching rules for other
certificate extensions.
Rescorla Standards Track [Page 46]
RFC 8446 TLS August 2018
4.2.6.Post-Handshake Client Authentication
The post_handshake_auth extension is used to indicate that a client
is willing to perform post-handshake authentication (Section 4.6.2).
Servers MUST NOT send a post-handshake CertificateRequest to clients
which do not offer this extension.Servers MUST NOT send this
extension.
struct {} PostHandshakeAuth;
The extension_data field of the post_handshake_auth extension is
zero length.
4.2.7.Supported Groups
When sent by the client, the supported_groups extension indicates
the named groups which the client supports for key exchange, ordered
from most preferred to least preferred.
Note: In versions of TLS prior to TLS 1.3, this extension was named
elliptic_curves and only contained elliptic curve groups.See
[RFC8422] and [RFC7919].This extension was also used to negotiate
ECDSA curves.Signature algorithms are now negotiated independently
(see Section 4.2.3).
The extension_data field of this extension contains a
NamedGroupList value:
enum {
/* Elliptic Curve Groups (ECDHE) */
secp256r1(0x0017), secp384r1(0x0018), secp521r1(0x0019),
x25519(0x001D), x448(0x001E),
/* Finite Field Groups (DHE) */
ffdhe2048(0x0100), ffdhe3072(0x0101), ffdhe4096(0x0102),
ffdhe6144(0x0103), ffdhe8192(0x0104),
/* Reserved Code Points */
ffdhe_private_use(0x01FC..0x01FF),
ecdhe_private_use(0xFE00..0xFEFF),
(0xFFFF)
} NamedGroup;
struct {
NamedGroup named_group_list<2..2^16-1>;
} NamedGroupList;
Rescorla Standards Track [Page 47]
RFC 8446 TLS August 2018
Elliptic Curve Groups (ECDHE):Indicates support for the
corresponding named curve, defined in either FIPS 186-4 [DSS] or
[RFC7748].Values 0xFE00 through 0xFEFF are reserved for
Private Use [RFC8126].
Finite Field Groups (DHE):Indicates support for the corresponding
finite field group, defined in [RFC7919].Values 0x01FC through
0x01FF are reserved for Private Use.
Items in named_group_list are ordered according to the senders
preferences (most preferred choice first).
As of TLS 1.3, servers are permitted to send the supported_groups
extension to the client.Clients MUST NOT act upon any information
found in supported_groups prior to successful completion of the
handshake but MAY use the information learned from a successfully
completed handshake to change what groups they use in their
key_share extension in subsequent connections.If the server has a
group it prefers to the ones in the key_share extension but is
still willing to accept the ClientHello, it SHOULD send
supported_groups to update the clients view of its preferences;
this extension SHOULD contain all groups the server supports,
regardless of whether they are currently supported by the client.
4.2.8.Key Share
The key_share extension contains the endpoints cryptographic
parameters.
Clients MAY send an empty client_shares vector in order to request
group selection from the server, at the cost of an additional round
trip (see Section 4.1.4).
struct {
NamedGroup group;
opaque key_exchange<1..2^16-1>;
} KeyShareEntry;
group:The named group for the key being exchanged.
key_exchange:Key exchange information.The contents of this field
are determined by the specified group and its corresponding
definition.Finite Field Diffie-Hellman [DH76] parameters are
described in Section 4.2.8.1; Elliptic Curve Diffie-Hellman
parameters are described in Section 4.2.8.2.
Rescorla Standards Track [Page 48]
RFC 8446 TLS August 2018
In the ClientHello message, the extension_data field of this
extension contains a KeyShareClientHello value:
struct {
KeyShareEntry client_shares<0..2^16-1>;
} KeyShareClientHello;
client_shares:A list of offered KeyShareEntry values in descending
order of client preference.
This vector MAY be empty if the client is requesting a
HelloRetryRequest.Each KeyShareEntry value MUST correspond to a
group offered in the supported_groups extension and MUST appear in
the same order.However, the values MAY be a non-contiguous subset
of the supported_groups extension and MAY omit the most preferred
groups.Such a situation could arise if the most preferred groups
are new and unlikely to be supported in enough places to make
pregenerating key shares for them efficient.
Clients can offer as many KeyShareEntry values as the number of
supported groups it is offering, each representing a single set of
key exchange parameters.For instance, a client might offer shares
for several elliptic curves or multiple FFDHE groups.The
key_exchange values for each KeyShareEntry MUST be generated
independently.Clients MUST NOT offer multiple KeyShareEntry values
for the same group.Clients MUST NOT offer any KeyShareEntry values
for groups not listed in the clients supported_groups extension.
Servers MAY check for violations of these rules and abort the
handshake with an illegal_parameter alert if one is violated.
In a HelloRetryRequest message, the extension_data field of this
extension contains a KeyShareHelloRetryRequest value:
struct {
NamedGroup selected_group;
} KeyShareHelloRetryRequest;
selected_group:The mutually supported group the server intends to
negotiate and is requesting a retried ClientHello/KeyShare for.
Upon receipt of this extension in a HelloRetryRequest, the client
MUST verify that (1) the selected_group field corresponds to a group
which was provided in the supported_groups extension in the
original ClientHello and (2) the selected_group field does not
correspond to a group which was provided in the key_share extension
in the original ClientHello.If either of these checks fails, then
the client MUST abort the handshake with an illegal_parameter
alert.Otherwise, when sending the new ClientHello, the client MUST
Rescorla Standards Track [Page 49]
RFC 8446 TLS August 2018
replace the original key_share extension with one containing only a
new KeyShareEntry for the group indicated in the selected_group field
of the triggering HelloRetryRequest.
In a ServerHello message, the extension_data field of this
extension contains a KeyShareServerHello value:
struct {
KeyShareEntry server_share;
} KeyShareServerHello;
server_share:A single KeyShareEntry value that is in the same group
as one of the clients shares.
If using (EC)DHE key establishment, servers offer exactly one
KeyShareEntry in the ServerHello.This value MUST be in the same
group as the KeyShareEntry value offered by the client that the
server has selected for the negotiated key exchange.Servers
MUST NOT send a KeyShareEntry for any group not indicated in the
clients supported_groups extension and MUST NOT send a
KeyShareEntry when using the psk_ke PskKeyExchangeMode.If using
(EC)DHE key establishment and a HelloRetryRequest containing a
key_share extension was received by the client, the client MUST
verify that the selected NamedGroup in the ServerHello is the same as
that in the HelloRetryRequest.If this check fails, the client MUST
abort the handshake with an illegal_parameter alert.
4.2.8.1.Diffie-Hellman Parameters
Diffie-Hellman [DH76] parameters for both clients and servers are
encoded in the opaque key_exchange field of a KeyShareEntry in a
KeyShare structure.The opaque value contains the Diffie-Hellman
public value (Y = g^X mod p) for the specified group (see [RFC7919]
for group definitions) encoded as a big-endian integer and padded to
the left with zeros to the size of p in bytes.
Note: For a given Diffie-Hellman group, the padding results in all
public keys having the same length.
Peers MUST validate each others public key Y by ensuring that 1 < Y < p-1.This check ensures that the remote peer is properly behaved and isnt forcing the local system into a small subgroup.Rescorla Standards Track [Page 50]RFC 8446 TLS August 20184.2.8.2.ECDHE Parameters ECDHE parameters for both clients and servers are encoded in the opaque key_exchange field of a KeyShareEntry in a KeyShare structure. For secp256r1, secp384r1, and secp521r1, the contents are the serialized value of the following struct:struct {uint8 legacy_form = 4;opaque X[coordinate_length];opaque Y[coordinate_length];} UncompressedPointRepresentation; X and Y, respectively, are the binary representations of the x and y values in network byte order.There are no internal length markers, so each number representation occupies as many octets as implied by the curve parameters.For P-256, this means that each of X and Y use 32 octets, padded on the left by zeros if necessary.For P-384, they take 48 octets each.For P-521, they take 66 octets each. For the curves secp256r1, secp384r1, and secp521r1, peers MUST validate each others public value Q by ensuring that the point is a valid point on the elliptic curve.The appropriate validation procedures are defined in Section 4.3.7 of [ECDSA] and alternatively in Section 5.6.2.3 of [KEYAGREEMENT].This process consists of three steps: (1) verify that Q is not the point at infinity (O), (2) verify that for Q = (x, y) both integers x and y are in the correct interval, and (3) ensure that (x, y) is a correct solution to the elliptic curve equation.For these curves, implementors do not need to verify membership in the correct subgroup. For X25519 and X448, the contents of the public value are the byte string inputs and outputs of the corresponding functions defined in [RFC7748]: 32 bytes for X25519 and 56 bytes for X448. Note: Versions of TLS prior to 1.3 permitted point format negotiation; TLS 1.3 removes this feature in favor of a single point format for each curve.4.2.9.Pre-Shared Key Exchange Modes In order to use PSKs, clients MUST also send a “psk_key_exchange_modes” extension.The semantics of this extension are that the client only supports the use of PSKs with these modes, which restricts both the use of PSKs offered in this ClientHello and those which the server might supply via NewSessionTicket.Rescorla Standards Track [Page 51]RFC 8446 TLS August 2018 A client MUST provide a “psk_key_exchange_modes” extension if it offers a “pre_shared_key” extension.If clients offer “pre_shared_key” without a “psk_key_exchange_modes” extension, servers MUST abort the handshake.Servers MUST NOT select a key exchange mode that is not listed by the client.This extension also restricts the modes for use with PSK resumption.Servers SHOULD NOT send NewSessionTicket with tickets that are not compatible with the advertised modes; however, if a server does so, the impact will just be that the clients attempts at resumption fail. The server MUST NOT send a “psk_key_exchange_modes” extension.enum { psk_ke(0), psk_dhe_ke(1), (255) } PskKeyExchangeMode;struct {PskKeyExchangeMode ke_modes<1..255>;
} PskKeyExchangeModes;
psk_ke:PSK-only key establishment.In this mode, the server
MUST NOT supply a key_share value.
psk_dhe_ke:PSK with (EC)DHE key establishment.In this mode, the
client and server MUST supply key_share values as described in
Section 4.2.8.
Any future values that are allocated must ensure that the transmitted
protocol messages unambiguously identify which mode was selected by
the server; at present, this is indicated by the presence of the
key_share in the ServerHello.
4.2.10.Early Data Indication
When a PSK is used and early data is allowed for that PSK, the client
can send Application Data in its first flight of messages.If the
client opts to do so, it MUST supply both the pre_shared_key and
early_data extensions.
The extension_data field of this extension contains an
EarlyDataIndication value.
Rescorla Standards Track [Page 52]
RFC 8446 TLS
August 2018
struct {} Empty;
struct {
select (Handshake.msg_type) {
uint32 max_early_data_size;
Empty;
See Section 4.6.1 for details regarding the use of the
max_early_data_size field.
The parameters for the 0-RTT data (version, symmetric cipher suite,
Application-Layer Protocol Negotiation (ALPN) [RFC7301] protocol,
etc.) are those associated with the PSK in use.For externally
provisioned PSKs, the associated values are those provisioned along
with the key.For PSKs established via a NewSessionTicket message,
the associated values are those which were negotiated in the
connection which established the PSK.The PSK used to encrypt the
early data MUST be the first PSK listed in the clients
pre_shared_key extension.
For PSKs provisioned via NewSessionTicket, a server MUST validate
that the ticket age for the selected PSK identity (computed by
subtracting ticket_age_add from PskIdentity.obfuscated_ticket_age
modulo 2^32) is within a small tolerance of the time since the ticket
was issued (see Section 8).If it is not, the server SHOULD proceed
with the handshake but reject 0-RTT, and SHOULD NOT take any other
action that assumes that this ClientHello is fresh.
0-RTT messages sent in the first flight have the same (encrypted)
content types as messages of the same type sent in other flights
(handshake and application_data) but are protected under different
keys.After receiving the servers Finished message, if the server
has accepted early data, an EndOfEarlyData message will be sent to
indicate the key change.This message will be encrypted with the
0-RTT traffic keys.
case new_session_ticket:
case client_hello:
case encrypted_extensions: Empty;
};
} EarlyDataIndication;
Rescorla Standards Track [Page 53]
RFC 8446 TLS August 2018
A server which receives an early_data extension MUST behave in one
of three ways:
Ignore the extension and return a regular 1-RTT response.The
server then skips past early data by attempting to deprotect
received records using the handshake traffic key, discarding
records which fail deprotection (up to the configured
max_early_data_size).Once a record is deprotected successfully,
it is treated as the start of the clients second flight and the
server proceeds as with an ordinary 1-RTT handshake.
Request that the client send another ClientHello by responding
with a HelloRetryRequest.A client MUST NOT include the
early_data extension in its followup ClientHello.The server
then ignores early data by skipping all records with an external
content type of application_data (indicating that they are
encrypted), up to the configured max_early_data_size.
Return its own early_data extension in EncryptedExtensions,
indicating that it intends to process the early data.It is not
possible for the server to accept only a subset of the early data
messages.Even though the server sends a message accepting early
data, the actual early data itself may already be in flight by the
time the server generates this message.
In order to accept early data, the server MUST have accepted a PSK
cipher suite and selected the first key offered in the clients
pre_shared_key extension.In addition, it MUST verify that the
following values are the same as those associated with the
selected PSK:
The TLS version number
The selected cipher suite
The selected ALPN [RFC7301] protocol, if any
These requirements are a superset of those needed to perform a 1-RTT
handshake using the PSK in question.For externally established
PSKs, the associated values are those provisioned along with the key.
For PSKs established via a NewSessionTicket message, the associated
values are those negotiated in the connection during which the ticket
was established.
Future extensions MUST define their interaction with 0-RTT.
Rescorla Standards Track [Page 54]
RFC 8446 TLS August 2018
If any of these checks fail, the server MUST NOT respond with the
extension and must discard all the first-flight data using one of the
first two mechanisms listed above (thus falling back to 1-RTT or
2-RTT).If the client attempts a 0-RTT handshake but the server
rejects it, the server will generally not have the 0-RTT record
protection keys and must instead use trial decryption (either with
the 1-RTT handshake keys or by looking for a cleartext ClientHello in
the case of a HelloRetryRequest) to find the first non-0-RTT message.
If the server chooses to accept the early_data extension, then it
MUST comply with the same error-handling requirements specified for
all records when processing early data records.Specifically, if the
server fails to decrypt a 0-RTT record following an accepted
early_data extension, it MUST terminate the connection with a
bad_record_mac alert as per Section 5.2.
If the server rejects the early_data extension, the client
application MAY opt to retransmit the Application Data previously
sent in early data once the handshake has been completed.Note that
automatic retransmission of early data could result in incorrect
assumptions regarding the status of the connection.For instance,
when the negotiated connection selects a different ALPN protocol from
what was used for the early data, an application might need to
construct different messages.Similarly, if early data assumes
anything about the connection state, it might be sent in error after
the handshake completes.
A TLS implementation SHOULD NOT automatically resend early data;
applications are in a better position to decide when retransmission
is appropriate.A TLS implementation MUST NOT automatically resend
early data unless the negotiated connection selects the same ALPN
protocol.
4.2.11.Pre-Shared Key Extension
The pre_shared_key extension is used to negotiate the identity of
the pre-shared key to be used with a given handshake in association
with PSK key establishment.
Rescorla Standards Track [Page 55]
RFC 8446 TLS August 2018
The extension_data field of this extension contains a
PreSharedKeyExtension value:
struct {
opaque identity<1..2^16-1>;
uint32 obfuscated_ticket_age;
} PskIdentity;
opaque PskBinderEntry<32..255>;
struct {
PskIdentity identities<7..2^16-1>;
PskBinderEntry binders<33..2^16-1>;
} OfferedPsks;
struct {
select (Handshake.msg_type) {
case client_hello: OfferedPsks;
case server_hello: uint16 selected_identity;
};
} PreSharedKeyExtension;
identity:A label for a key.For instance, a ticket (as defined in
Appendix B.3.4) or a label for a pre-shared key established
externally.
obfuscated_ticket_age:An obfuscated version of the age of the key.
Section 4.2.11.1 describes how to form this value for identities
established via the NewSessionTicket message.For identities
established externally, an obfuscated_ticket_age of 0 SHOULD be
used, and servers MUST ignore the value.
identities:A list of the identities that the client is willing to
negotiate with the server.If sent alongside the early_data
extension (see Section 4.2.10), the first identity is the one used
for 0-RTT data.
binders:A series of HMAC values, one for each value in the
identities list and in the same order, computed as described
below.
selected_identity:The servers chosen identity expressed as a
(0-based) index into the identities in the clients list.
Each PSK is associated with a single Hash algorithm.For PSKs
established via the ticket mechanism (Section 4.6.1), this is the KDF
Hash algorithm on the connection where the ticket was established.
For externally established PSKs, the Hash algorithm MUST be set when
Rescorla Standards Track [Page 56]
RFC 8446 TLS August 2018
the PSK is established or default to SHA-256 if no such algorithm is
defined.The server MUST ensure that it selects a compatible PSK
(if any) and cipher suite.
In TLS versions prior to TLS 1.3, the Server Name Identification
(SNI) value was intended to be associated with the session (Section 3
of [RFC6066]), with the server being required to enforce that the SNI
value associated with the session matches the one specified in the
resumption handshake.However, in reality the implementations were
not consistent on which of two supplied SNI values they would use,
leading to the consistency requirement being de facto enforced by the
clients.In TLS 1.3, the SNI value is always explicitly specified in
the resumption handshake, and there is no need for the server to
associate an SNI value with the ticket.Clients, however, SHOULD
store the SNI with the PSK to fulfill the requirements of
Section 4.6.1.
Implementors note: When session resumption is the primary use case
of PSKs, the most straightforward way to implement the PSK/cipher
suite matching requirements is to negotiate the cipher suite first
and then exclude any incompatible PSKs.Any unknown PSKs (e.g., ones
not in the PSK database or encrypted with an unknown key) SHOULD
simply be ignored.If no acceptable PSKs are found, the server
SHOULD perform a non-PSK handshake if possible.If backward
compatibility is important, client-provided, externally established
PSKs SHOULD influence cipher suite selection.
Prior to accepting PSK key establishment, the server MUST validate
the corresponding binder value (see Section 4.2.11.2 below).If this
value is not present or does not validate, the server MUST abort the
handshake.Servers SHOULD NOT attempt to validate multiple binders;
rather, they SHOULD select a single PSK and validate solely the
binder that corresponds to that PSK.See Section 8.2 and
Appendix E.6 for the security rationale for this requirement.In
order to accept PSK key establishment, the server sends a
pre_shared_key extension indicating the selected identity.
Clients MUST verify that the servers selected_identity is within the
range supplied by the client, that the server selected a cipher suite
indicating a Hash associated with the PSK, and that a server
key_share extension is present if required by the ClientHello
psk_key_exchange_modes extension.If these values are not
consistent, the client MUST abort the handshake with an
illegal_parameter alert.
Rescorla Standards Track [Page 57]
RFC 8446 TLS August 2018
If the server supplies an early_data extension, the client MUST
verify that the servers selected_identity is 0.If any other value
is returned, the client MUST abort the handshake with an
illegal_parameter alert.
The pre_shared_key extension MUST be the last extension in the
ClientHello (this facilitates implementation as described below).
Servers MUST check that it is the last extension and otherwise fail
the handshake with an illegal_parameter alert.
4.2.11.1.Ticket Age
The clients view of the age of a ticket is the time since the
receipt of the NewSessionTicket message.Clients MUST NOT attempt to
use tickets which have ages greater than the ticket_lifetime value
which was provided with the ticket.The obfuscated_ticket_age
field of each PskIdentity contains an obfuscated version of the
ticket age formed by taking the age in milliseconds and adding the
ticket_age_add value that was included with the ticket (see
Section 4.6.1), modulo 2^32.This addition prevents passive
observers from correlating connections unless tickets are reused.
Note that the ticket_lifetime field in the NewSessionTicket message
is in seconds but the obfuscated_ticket_age is in milliseconds.
Because ticket lifetimes are restricted to a week, 32 bits is enough
to represent any plausible age, even in milliseconds.
4.2.11.2.PSK Binder
The PSK binder value forms a binding between a PSK and the current
handshake, as well as a binding between the handshake in which the
PSK was generated (if via a NewSessionTicket message) and the current
handshake.Each entry in the binders list is computed as an HMAC
over a transcript hash (see Section 4.4.1) containing a partial
ClientHello up to and including the PreSharedKeyExtension.identities
field.That is, it includes all of the ClientHello but not the
binders list itself.The length fields for the message (including
the overall length, the length of the extensions block, and the
length of the pre_shared_key extension) are all set as if binders
of the correct lengths were present.
The PskBinderEntry is computed in the same way as the Finished
message (Section 4.4.4) but with the BaseKey being the binder_key
derived via the key schedule from the corresponding PSK which is
being offered (see Section 7.1).
Rescorla Standards Track [Page 58]
RFC 8446 TLS August 2018
If the handshake includes a HelloRetryRequest, the initial
ClientHello and HelloRetryRequest are included in the transcript
along with the new ClientHello.For instance, if the client sends
ClientHello1, its binder will be computed over:
Transcript-Hash(Truncate(ClientHello1))
Where Truncate() removes the binders list from the ClientHello.
If the server responds with a HelloRetryRequest and the client then
sends ClientHello2, its binder will be computed over:
Transcript-Hash(ClientHello1,
HelloRetryRequest,
Truncate(ClientHello2))
The full ClientHello1/ClientHello2 is included in all other handshake
hash computations.Note that in the first flight,
Truncate(ClientHello1) is hashed directly, but in the second flight,
ClientHello1 is hashed and then reinjected as a message_hash
message, as described in Section 4.4.1.
4.2.11.3.Processing Order
Clients are permitted to stream 0-RTT data until they receive the
servers Finished, only then sending the EndOfEarlyData message,
followed by the rest of the handshake.In order to avoid deadlocks,
when accepting early_data, servers MUST process the clients
ClientHello and then immediately send their flight of messages,
rather than waiting for the clients EndOfEarlyData message before
sending its ServerHello.
4.3.Server Parameters
The next two messages from the server, EncryptedExtensions and
CertificateRequest, contain information from the server that
determines the rest of the handshake.These messages are encrypted
with keys derived from the server_handshake_traffic_secret.
Rescorla Standards Track [Page 59]
RFC 8446 TLS August 2018
4.3.1.Encrypted Extensions
In all handshakes, the server MUST send the EncryptedExtensions
message immediately after the ServerHello message.This is the first
message that is encrypted under keys derived from the
server_handshake_traffic_secret.
The EncryptedExtensions message contains extensions that can be
protected, i.e., any which are not needed to establish the
cryptographic context but which are not associated with individual
certificates.The client MUST check EncryptedExtensions for the
presence of any forbidden extensions and if any are found MUST abort
the handshake with an illegal_parameter alert.
Structure of this message:
struct {
Extension extensions<0..2^16-1>;
} EncryptedExtensions;
extensions:A list of extensions.For more information, see the
table in Section 4.2.
4.3.2.Certificate Request
A server which is authenticating with a certificate MAY optionally
request a certificate from the client.This message, if sent, MUST
follow EncryptedExtensions.
Structure of this message:
struct {
opaque certificate_request_context<0..2^8-1>;
Extension extensions<2..2^16-1>;
} CertificateRequest;
Rescorla Standards Track [Page 60]
RFC 8446 TLS August 2018
certificate_request_context:An opaque string which identifies the
certificate request and which will be echoed in the clients
Certificate message.The certificate_request_context MUST be
unique within the scope of this connection (thus preventing replay
of client CertificateVerify messages).This field SHALL be zero
length unless used for the post-handshake authentication exchanges
described in Section 4.6.2.When requesting post-handshake
authentication, the server SHOULD make the context unpredictable
to the client (e.g., by randomly generating it) in order to
prevent an attacker who has temporary access to the clients
private key from pre-computing valid CertificateVerify messages.
extensions:A set of extensions describing the parameters of the
certificate being requested.The signature_algorithms extension
MUST be specified, and other extensions may optionally be included
if defined for this message.Clients MUST ignore unrecognized
extensions.
In prior versions of TLS, the CertificateRequest message carried a
list of signature algorithms and certificate authorities which the
server would accept.In TLS 1.3, the former is expressed by sending
the signature_algorithms and optionally signature_algorithms_cert
extensions.The latter is expressed by sending the
certificate_authorities extension (see Section 4.2.4).
Servers which are authenticating with a PSK MUST NOT send the
CertificateRequest message in the main handshake, though they MAY
send it in post-handshake authentication (see Section 4.6.2) provided
that the client has sent the post_handshake_auth extension (see
Section 4.2.6).
4.4.Authentication Messages
As discussed in Section 2, TLS generally uses a common set of
messages for authentication, key confirmation, and handshake
integrity: Certificate, CertificateVerify, and Finished.(The PSK
binders also perform key confirmation, in a similar fashion.)These
three messages are always sent as the last messages in their
handshake flight.The Certificate and CertificateVerify messages are
only sent under certain circumstances, as defined below.The
Finished message is always sent as part of the Authentication Block.
These messages are encrypted under keys derived from the
[sender]_handshake_traffic_secret.
Rescorla Standards Track [Page 61]
RFC 8446 TLS August 2018
The computations for the Authentication messages all uniformly take
the following inputs:
The certificate and signing key to be used.
A Handshake Context consisting of the set of messages to be
included in the transcript hash.
A Base Key to be used to compute a MAC key.
Based on these inputs, the messages then contain:
Certificate:The certificate to be used for authentication, and any
supporting certificates in the chain.Note that certificate-based
client authentication is not available in PSK handshake flows
(including 0-RTT).
CertificateVerify:A signature over the value
Transcript-Hash(Handshake Context, Certificate).
Finished:A MAC over the value Transcript-Hash(Handshake Context,
Certificate, CertificateVerify) using a MAC key derived from the
Base Key.
The following table defines the Handshake Context and MAC Base Key
for each scenario:
++-++
| Mode| Handshake Context | Base Key|
++-++
| Server
|
| ||||
| ClientHello later | server_handshake_traffic_ |
| of EncryptedExtensions/ | secret|
| CertificateRequest| |
| Client
|
| |||| | Post- | ClientHello client | client_application_traffic_ | | Handshake | Finished + | secret_N | | | CertificateRequest | | ++-++
| ClientHello later | client_handshake_traffic_ |
| of server | secret|
| Finished/EndOfEarlyData | |
Rescorla Standards Track [Page 62]
RFC 8446 TLS August 2018
4.4.1.The Transcript Hash
Many of the cryptographic computations in TLS make use of a
transcript hash.This value is computed by hashing the concatenation
of each included handshake message, including the handshake message
header carrying the handshake message type and length fields, but not
including record layer headers.I.e.,
Transcript-Hash(M1, M2, Mn) = Hash(M1 || M2 || || Mn)
As an exception to this general rule, when the server responds to a
ClientHello with a HelloRetryRequest, the value of ClientHello1 is
replaced with a special synthetic handshake message of handshake type
message_hash containing Hash(ClientHello1).I.e.,
Transcript-Hash(ClientHello1, HelloRetryRequest, Mn) =
Hash(message_hash ||/* Handshake type */
00 00 Hash.length||/* Handshake message length (bytes) */
Hash(ClientHello1) ||/* Hash of ClientHello1 */
HelloRetryRequest|| || Mn)
The reason for this construction is to allow the server to do a
stateless HelloRetryRequest by storing just the hash of ClientHello1
in the cookie, rather than requiring it to export the entire
intermediate hash state (see Section 4.2.2).
For concreteness, the transcript hash is always taken from the
following sequence of handshake messages, starting at the first
ClientHello and including only those messages that were sent:
ClientHello, HelloRetryRequest, ClientHello, ServerHello,
EncryptedExtensions, server CertificateRequest, server Certificate,
server CertificateVerify, server Finished, EndOfEarlyData, client
Certificate, client CertificateVerify, client Finished.
In general, implementations can implement the transcript by keeping a
running transcript hash value based on the negotiated hash.Note,
however, that subsequent post-handshake authentications do not
include each other, just the messages through the end of the main
handshake.
Rescorla Standards Track [Page 63]
RFC 8446 TLS August 2018
4.4.2.Certificate
This message conveys the endpoints certificate chain to the peer.
The server MUST send a Certificate message whenever the agreed-upon
key exchange method uses certificates for authentication (this
includes all key exchange methods defined in this document
except PSK).
The client MUST send a Certificate message if and only if the server
has requested client authentication via a CertificateRequest message
(Section 4.3.2).If the server requests client authentication but no
suitable certificate is available, the client MUST send a Certificate
message containing no certificates (i.e., with the certificate_list
field having length 0).A Finished message MUST be sent regardless
of whether the Certificate message is empty.
Structure of this message:
enum {
X509(0),
RawPublicKey(2),
(255)
} CertificateType;
struct {
select (certificate_type) {
case RawPublicKey:
/* From RFC 7250 ASN.1_subjectPublicKeyInfo */
opaque ASN1_subjectPublicKeyInfo<1..2^24-1>;
case X509:
opaque cert_data<1..2^24-1>;
};
Extension extensions<0..2^16-1>;
} CertificateEntry;
struct {
opaque certificate_request_context<0..2^8-1>;
CertificateEntry certificate_list<0..2^24-1>;
} Certificate;
Rescorla Standards Track [Page 64]
RFC 8446 TLS August 2018
certificate_request_context:If this message is in response to a
CertificateRequest, the value of certificate_request_context in
that message.Otherwise (in the case of server authentication),
this field SHALL be zero length.
certificate_list:A sequence (chain) of CertificateEntry structures,
each containing a single certificate and set of extensions.
extensions:A set of extension values for the CertificateEntry.The
Extension format is defined in Section 4.2.Valid extensions
for server certificates at present include the OCSP Status
extension [RFC6066] and the SignedCertificateTimestamp extension
[RFC6962]; future extensions may be defined for this message as
well.Extensions in the Certificate message from the server MUST
correspond to ones from the ClientHello message.Extensions in
the Certificate message from the client MUST correspond to
extensions in the CertificateRequest message from the server.If
an extension applies to the entire chain, it SHOULD be included in
the first CertificateEntry.
If the corresponding certificate type extension
(server_certificate_type or client_certificate_type) was not
negotiated in EncryptedExtensions, or the X.509 certificate type was
negotiated, then each CertificateEntry contains a DER-encoded X.509
certificate.The senders certificate MUST come in the first
CertificateEntry in the list.Each following certificate SHOULD
directly certify the one immediately preceding it.Because
certificate validation requires that trust anchors be distributed
independently, a certificate that specifies a trust anchor MAY be
omitted from the chain, provided that supported peers are known to
possess any omitted certificates.
Note: Prior to TLS 1.3, certificate_list ordering required each
certificate to certify the one immediately preceding it; however,
some implementations allowed some flexibility.Servers sometimes
send both a current and deprecated intermediate for transitional
purposes, and others are simply configured incorrectly, but these
cases can nonetheless be validated properly.For maximum
compatibility, all implementations SHOULD be prepared to handle
potentially extraneous certificates and arbitrary orderings from any
TLS version, with the exception of the end-entity certificate which
MUST be first.
If the RawPublicKey certificate type was negotiated, then the
certificate_list MUST contain no more than one CertificateEntry,
which contains an ASN1_subjectPublicKeyInfo value as defined in
[RFC7250], Section 3.
Rescorla Standards Track [Page 65]
RFC 8446 TLS August 2018
The OpenPGP certificate type [RFC6091] MUST NOT be used with TLS 1.3.
The servers certificate_list MUST always be non-empty.A client
will send an empty certificate_list if it does not have an
appropriate certificate to send in response to the servers
authentication request.
4.4.2.1.OCSP Status and SCT Extensions
[RFC6066] and [RFC6961] provide extensions to negotiate the server
sending OCSP responses to the client.In TLS 1.2 and below, the
server replies with an empty extension to indicate negotiation of
this extension and the OCSP information is carried in a
CertificateStatus message.In TLS 1.3, the servers OCSP information
is carried in an extension in the CertificateEntry containing the
associated certificate.Specifically, the body of the
status_request extension from the server MUST be a
CertificateStatus structure as defined in [RFC6066], which is
interpreted as defined in [RFC6960].
Note: The status_request_v2 extension [RFC6961] is deprecated.
TLS 1.3 servers MUST NOT act upon its presence or information in it
when processing ClientHello messages; in particular, they MUST NOT
send the status_request_v2 extension in the EncryptedExtensions,
CertificateRequest, or Certificate messages.TLS 1.3 servers MUST be
able to process ClientHello messages that include it, as it MAY be
sent by clients that wish to use it in earlier protocol versions.
A server MAY request that a client present an OCSP response with its
certificate by sending an empty status_request extension in its
CertificateRequest message.If the client opts to send an OCSP
response, the body of its status_request extension MUST be a
CertificateStatus structure as defined in [RFC6066].
Similarly, [RFC6962] provides a mechanism for a server to send a
Signed Certificate Timestamp (SCT) as an extension in the ServerHello
in TLS 1.2 and below.In TLS 1.3, the servers SCT information is
carried in an extension in the CertificateEntry.
Rescorla Standards Track [Page 66]
RFC 8446 TLS August 2018
4.4.2.2.Server Certificate Selection
The following rules apply to the certificates sent by the server:
The certificate type MUST be X.509v3 [RFC5280], unless explicitly
negotiated otherwise (e.g., [RFC7250]).
The servers end-entity certificates public key (and associated
restrictions) MUST be compatible with the selected authentication
algorithm from the clients signature_algorithms extension
(currently RSA, ECDSA, or EdDSA).
The certificate MUST allow the key to be used for signing (i.e.,
the digitalSignature bit MUST be set if the Key Usage extension is
present) with a signature scheme indicated in the clients
signature_algorithms/signature_algorithms_cert extensions (see
Section 4.2.3).
The server_name [RFC6066] and certificate_authorities
extensions are used to guide certificate selection.As servers
MAY require the presence of the server_name extension, clients
SHOULD send this extension, when applicable.
All certificates provided by the server MUST be signed by a signature
algorithm advertised by the client if it is able to provide such a
chain (see Section 4.2.3).Certificates that are self-signed or
certificates that are expected to be trust anchors are not validated
as part of the chain and therefore MAY be signed with any algorithm.
If the server cannot produce a certificate chain that is signed only
via the indicated supported algorithms, then it SHOULD continue the
handshake by sending the client a certificate chain of its choice
that may include algorithms that are not known to be supported by the
client.This fallback chain SHOULD NOT use the deprecated SHA-1 hash
algorithm in general, but MAY do so if the clients advertisement
permits it, and MUST NOT do so otherwise.
If the client cannot construct an acceptable chain using the provided
certificates and decides to abort the handshake, then it MUST abort
the handshake with an appropriate certificate-related alert (by
default, unsupported_certificate; see Section 6.2 for more
information).
If the server has multiple certificates, it chooses one of them based
on the above-mentioned criteria (in addition to other criteria, such
as transport-layer endpoint, local configuration, and preferences).
Rescorla Standards Track [Page 67]
RFC 8446 TLS August 2018
4.4.2.3.Client Certificate Selection
The following rules apply to certificates sent by the client:
The certificate type MUST be X.509v3 [RFC5280], unless explicitly
negotiated otherwise (e.g., [RFC7250]).
If the certificate_authorities extension in the
CertificateRequest message was present, at least one of the
certificates in the certificate chain SHOULD be issued by one of
the listed CAs.
The certificates MUST be signed using an acceptable signature
algorithm, as described in Section 4.3.2.Note that this relaxes
the constraints on certificate-signing algorithms found in prior
versions of TLS.
If the CertificateRequest message contained a non-empty
oid_filters extension, the end-entity certificate MUST match the
extension OIDs that are recognized by the client, as described in
Section 4.2.5.
4.4.2.4.Receiving a Certificate Message
In general, detailed certificate validation procedures are out of
scope for TLS (see [RFC5280]).This section provides TLS-specific
requirements.
If the server supplies an empty Certificate message, the client MUST
abort the handshake with a decode_error alert.
If the client does not send any certificates (i.e., it sends an empty
Certificate message), the server MAY at its discretion either
continue the handshake without client authentication or abort the
handshake with a certificate_required alert.Also, if some aspect
of the certificate chain was unacceptable (e.g., it was not signed by
a known, trusted CA), the server MAY at its discretion either
continue the handshake (considering the client unauthenticated) or
abort the handshake.
Any endpoint receiving any certificate which it would need to
validate using any signature algorithm using an MD5 hash MUST abort
the handshake with a bad_certificate alert.SHA-1 is deprecated,
and it is RECOMMENDED that any endpoint receiving any certificate
which it would need to validate using any signature algorithm using a
SHA-1 hash abort the handshake with a bad_certificate alert.For
clarity, this means that endpoints can accept these algorithms for
certificates that are self-signed or are trust anchors.
Rescorla Standards Track [Page 68]
RFC 8446 TLS August 2018
All endpoints are RECOMMENDED to transition to SHA-256 or better as
soon as possible to maintain interoperability with implementations
currently in the process of phasing out SHA-1 support.
Note that a certificate containing a key for one signature algorithm
MAY be signed using a different signature algorithm (for instance, an
RSA key signed with an ECDSA key).
4.4.3.Certificate Verify
This message is used to provide explicit proof that an endpoint
possesses the private key corresponding to its certificate.The
CertificateVerify message also provides integrity for the handshake
up to this point.Servers MUST send this message when authenticating
via a certificate.Clients MUST send this message whenever
authenticating via a certificate (i.e., when the Certificate message
is non-empty).When sent, this message MUST appear immediately after
the Certificate message and immediately prior to the Finished
message.
Structure of this message:
struct {
SignatureScheme algorithm;
opaque signature<0..2^16-1>;
} CertificateVerify;
The algorithm field specifies the signature algorithm used (see
Section 4.2.3 for the definition of this type).The signature is a
digital signature using that algorithm.The content that is covered
under the signature is the hash output as described in Section 4.4.1,
namely:
Transcript-Hash(Handshake Context, Certificate)
The digital signature is then computed over the concatenation of:
A string that consists of octet 32 (0x20) repeated 64 times
The context string
A single 0 byte which serves as the separator
The content to be signed
Rescorla Standards Track [Page 69]
RFC 8446 TLS August 2018
This structure is intended to prevent an attack on previous versions
of TLS in which the ServerKeyExchange format meant that attackers
could obtain a signature of a message with a chosen 32-byte prefix
(ClientHello.random).The initial 64-byte pad clears that prefix
along with the server-controlled ServerHello.random.
The context string for a server signature is
TLS 1.3, server CertificateVerify.The context string for a
client signature is TLS 1.3, client CertificateVerify.It is
used to provide separation between signatures made in different
contexts, helping against potential cross-protocol attacks.
For example, if the transcript hash was 32 bytes of 01 (this length
would make sense for SHA-256), the content covered by the digital
signature for a server CertificateVerify would be:
2020202020202020202020202020202020202020202020202020202020202020
2020202020202020202020202020202020202020202020202020202020202020
544c5320312e332c207365727665722043657274696669636174655665726966
79
00
0101010101010101010101010101010101010101010101010101010101010101
On the sender side, the process for computing the signature field of
the CertificateVerify message takes as input:
The content covered by the digital signature
The private signing key corresponding to the certificate sent in
the previous message
If the CertificateVerify message is sent by a server, the signature
algorithm MUST be one offered in the clients signature_algorithms
extension unless no valid certificate chain can be produced without
unsupported algorithms (see Section 4.2.3).
If sent by a client, the signature algorithm used in the signature
MUST be one of those present in the supported_signature_algorithms
field of the signature_algorithms extension in the
CertificateRequest message.
In addition, the signature algorithm MUST be compatible with the key
in the senders end-entity certificate.RSA signatures MUST use an
RSASSA-PSS algorithm, regardless of whether RSASSA-PKCS1-v1_5
algorithms appear in signature_algorithms.The SHA-1 algorithm
MUST NOT be used in any signatures of CertificateVerify messages.
Rescorla Standards Track [Page 70]
RFC 8446 TLS August 2018
All SHA-1 signature algorithms in this specification are defined
solely for use in legacy certificates and are not valid for
CertificateVerify signatures.
The receiver of a CertificateVerify message MUST verify the signature
field.The verification process takes as input:
The content covered by the digital signature
The public key contained in the end-entity certificate found in
the associated Certificate message
The digital signature received in the signature field of the
CertificateVerify message
If the verification fails, the receiver MUST terminate the handshake
with a decrypt_error alert.
4.4.4.Finished
The Finished message is the final message in the Authentication
Block.It is essential for providing authentication of the handshake
and of the computed keys.
Recipients of Finished messages MUST verify that the contents are
correct and if incorrect MUST terminate the connection with a
decrypt_error alert.
Once a side has sent its Finished message and has received and
validated the Finished message from its peer, it may begin to send
and receive Application Data over the connection.There are two
settings in which it is permitted to send data prior to receiving the
peers Finished:
1.Clients sending 0-RTT data as described in Section 4.2.10.
2.Servers MAY send data after sending their first flight, but
because the handshake is not yet complete, they have no assurance
of either the peers identity or its liveness (i.e., the
ClientHello might have been replayed).
Rescorla Standards Track [Page 71]
RFC 8446 TLS August 2018
The key used to compute the Finished message is computed from the
Base Key defined in Section 4.4 using HKDF (see Section 7.1).
Specifically:
finished_key =
HKDF-Expand-Label(BaseKey, finished, , Hash.length)
Structure of this message:
struct {
opaque verify_data[Hash.length];
} Finished;
The verify_data value is computed as follows:
verify_data =
HMAC(finished_key,
Transcript-Hash(Handshake Context,
Certificate*, CertificateVerify*))
* Only included if present.
HMAC [RFC2104] uses the Hash algorithm for the handshake.As noted
above, the HMAC input can generally be implemented by a running hash,
i.e., just the handshake hash at this point.
In previous versions of TLS, the verify_data was always 12 octets
long.In TLS 1.3, it is the size of the HMAC output for the Hash
used for the handshake.
Note: Alerts and any other non-handshake record types are not
handshake messages and are not included in the hash computations.
Any records following a Finished message MUST be encrypted under the
appropriate application traffic key as described in Section 7.2.In
particular, this includes any alerts sent by the server in response
to client Certificate and CertificateVerify messages.
4.5.End of Early Data
struct {} EndOfEarlyData;
If the server sent an early_data extension in EncryptedExtensions,
the client MUST send an EndOfEarlyData message after receiving the
server Finished.If the server does not send an early_data
extension in EncryptedExtensions, then the client MUST NOT send an
EndOfEarlyData message.This message indicates that all 0-RTT
application_data messages, if any, have been transmitted and that the
Rescorla Standards Track [Page 72]
RFC 8446 TLS August 2018
following records are protected under handshake traffic keys.
Servers MUST NOT send this message, and clients receiving it MUST
terminate the connection with an unexpected_message alert.This
message is encrypted under keys derived from the
client_early_traffic_secret.
4.6.Post-Handshake Messages
TLS also allows other messages to be sent after the main handshake.
These messages use a handshake content type and are encrypted under
the appropriate application traffic key.
4.6.1.New Session Ticket Message
At any time after the server has received the client Finished
message, it MAY send a NewSessionTicket message.This message
creates a unique association between the ticket value and a secret
PSK derived from the resumption master secret (see Section 7).
The client MAY use this PSK for future handshakes by including the
ticket value in the pre_shared_key extension in its ClientHello
(Section 4.2.11).Servers MAY send multiple tickets on a single
connection, either immediately after each other or after specific
events (see Appendix C.4).For instance, the server might send a new
ticket after post-handshake authentication in order to encapsulate
the additional client authentication state.Multiple tickets are
useful for clients for a variety of purposes, including:
Opening multiple parallel HTTP connections.
Performing connection racing across interfaces and address
families via (for example) Happy Eyeballs [RFC8305] or related
techniques.
Any ticket MUST only be resumed with a cipher suite that has the same
KDF hash algorithm as that used to establish the original connection.
Clients MUST only resume if the new SNI value is valid for the server
certificate presented in the original session and SHOULD only resume
if the SNI value matches the one used in the original session.The
latter is a performance optimization: normally, there is no reason to
expect that different servers covered by a single certificate would
be able to accept each others tickets; hence, attempting resumption
in that case would waste a single-use ticket.If such an indication
is provided (externally or by any other means), clients MAY resume
with a different SNI value.
Rescorla Standards Track [Page 73]
RFC 8446 TLS August 2018
On resumption, if reporting an SNI value to the calling application,
implementations MUST use the value sent in the resumption ClientHello
rather than the value sent in the previous session.Note that if a
server implementation declines all PSK identities with different SNI
values, these two values are always the same.
Note: Although the resumption master secret depends on the clients
second flight, a server which does not request client authentication
MAY compute the remainder of the transcript independently and then
send a NewSessionTicket immediately upon sending its Finished rather
than waiting for the client Finished.This might be appropriate in
cases where the client is expected to open multiple TLS connections
in parallel and would benefit from the reduced overhead of a
resumption handshake, for example.
struct {
uint32 ticket_lifetime;
uint32 ticket_age_add;
opaque ticket_nonce<0..255>;
opaque ticket<1..2^16-1>;
Extension extensions<0..2^16-2>;
} NewSessionTicket;
ticket_lifetime:Indicates the lifetime in seconds as a 32-bit
unsigned integer in network byte order from the time of ticket
issuance.Servers MUST NOT use any value greater than
604800 seconds (7 days).The value of zero indicates that the
ticket should be discarded immediately.Clients MUST NOT cache
tickets for longer than 7 days, regardless of the ticket_lifetime,
and MAY delete tickets earlier based on local policy.A server
MAY treat a ticket as valid for a shorter period of time than what
is stated in the ticket_lifetime.
ticket_age_add:A securely generated, random 32-bit value that is
used to obscure the age of the ticket that the client includes in
the pre_shared_key extension.The client-side ticket age is
added to this value modulo 2^32 to obtain the value that is
transmitted by the client.The server MUST generate a fresh value
for each ticket it sends.
ticket_nonce:A per-ticket value that is unique across all tickets
issued on this connection.
Rescorla Standards Track [Page 74]
RFC 8446 TLS August 2018
ticket:The value of the ticket to be used as the PSK identity.The
ticket itself is an opaque label.It MAY be either a database
lookup key or a self-encrypted and self-authenticated value.
extensions:A set of extension values for the ticket.The
Extension format is defined in Section 4.2.Clients MUST ignore
unrecognized extensions.
The sole extension currently defined for NewSessionTicket is
early_data, indicating that the ticket may be used to send 0-RTT
data (Section 4.2.10).It contains the following value:
max_early_data_size:The maximum amount of 0-RTT data that the
client is allowed to send when using this ticket, in bytes.Only
Application Data payload (i.e., plaintext but not padding or the
inner content type byte) is counted.A server receiving more than
max_early_data_size bytes of 0-RTT data SHOULD terminate the
connection with an unexpected_message alert.Note that servers
that reject early data due to lack of cryptographic material will
be unable to differentiate padding from content, so clients
SHOULD NOT depend on being able to send large quantities of
padding in early data records.
The PSK associated with the ticket is computed as:
HKDF-Expand-Label(resumption_master_secret,
resumption, ticket_nonce, Hash.length)
Because the ticket_nonce value is distinct for each NewSessionTicket
message, a different PSK will be derived for each ticket.
Note that in principle it is possible to continue issuing new tickets
which indefinitely extend the lifetime of the keying material
originally derived from an initial non-PSK handshake (which was most
likely tied to the peers certificate).It is RECOMMENDED that
implementations place limits on the total lifetime of such keying
material; these limits should take into account the lifetime of the
peers certificate, the likelihood of intervening revocation, and the
time since the peers online CertificateVerify signature.
4.6.2.Post-Handshake Authentication
When the client has sent the post_handshake_auth extension (see
Section 4.2.6), a server MAY request client authentication at any
time after the handshake has completed by sending a
CertificateRequest message.The client MUST respond with the
appropriate Authentication messages (see Section 4.4).If the client
chooses to authenticate, it MUST send Certificate, CertificateVerify,
Rescorla Standards Track [Page 75]
RFC 8446 TLS August 2018
and Finished.If it declines, it MUST send a Certificate message
containing no certificates followed by Finished.All of the clients
messages for a given response MUST appear consecutively on the wire
with no intervening messages of other types.
A client that receives a CertificateRequest message without having
sent the post_handshake_auth extension MUST send an
unexpected_message fatal alert.
Note: Because client authentication could involve prompting the user,
servers MUST be prepared for some delay, including receiving an
arbitrary number of other messages between sending the
CertificateRequest and receiving a response.In addition, clients
which receive multiple CertificateRequests in close succession MAY
respond to them in a different order than they were received (the
certificate_request_context value allows the server to disambiguate
the responses).
4.6.3.Key and Initialization Vector Update
The KeyUpdate handshake message is used to indicate that the sender
is updating its sending cryptographic keys.This message can be sent
by either peer after it has sent a Finished message.Implementations
that receive a KeyUpdate message prior to receiving a Finished
message MUST terminate the connection with an unexpected_message
alert.After sending a KeyUpdate message, the sender SHALL send all
its traffic using the next generation of keys, computed as described
in Section 7.2.Upon receiving a KeyUpdate, the receiver MUST update
its receiving keys.
enum {
update_not_requested(0), update_requested(1), (255)
} KeyUpdateRequest;
struct {
KeyUpdateRequest request_update;
} KeyUpdate;
request_update:Indicates whether the recipient of the KeyUpdate
should respond with its own KeyUpdate.If an implementation
receives any other value, it MUST terminate the connection with an
illegal_parameter alert.
If the request_update field is set to update_requested, then the
receiver MUST send a KeyUpdate of its own with request_update set to
update_not_requested prior to sending its next Application Data
record.This mechanism allows either side to force an update to the
entire connection, but causes an implementation which receives
Rescorla Standards Track [Page 76]
RFC 8446 TLS August 2018
multiple KeyUpdates while it is silent to respond with a single
update.Note that implementations may receive an arbitrary number of
messages between sending a KeyUpdate with request_update set to
update_requested and receiving the peers KeyUpdate, because those
messages may already be in flight.However, because send and receive
keys are derived from independent traffic secrets, retaining the
receive traffic secret does not threaten the forward secrecy of data
sent before the sender changed keys.
If implementations independently send their own KeyUpdates with
request_update set to update_requested and they cross in flight,
then each side will also send a response, with the result that each
side increments by two generations.
Both sender and receiver MUST encrypt their KeyUpdate messages with
the old keys.Additionally, both sides MUST enforce that a KeyUpdate
with the old key is received before accepting any messages encrypted
with the new key.Failure to do so may allow message truncation
attacks.
5.Record Protocol
The TLS record protocol takes messages to be transmitted, fragments
the data into manageable blocks, protects the records, and transmits
the result.Received data is verified, decrypted, reassembled, and
then delivered to higher-level clients.
TLS records are typed, which allows multiple higher-level protocols
to be multiplexed over the same record layer.This document
specifies four content types: handshake, application_data, alert, and
change_cipher_spec.The change_cipher_spec record is used only for
compatibility purposes (see Appendix D.4).
An implementation may receive an unencrypted record of type
change_cipher_spec consisting of the single byte value 0x01 at any
time after the first ClientHello message has been sent or received
and before the peers Finished message has been received and MUST
simply drop it without further processing.Note that this record may
appear at a point at the handshake where the implementation is
expecting protected records, and so it is necessary to detect this
condition prior to attempting to deprotect the record.An
implementation which receives any other change_cipher_spec value or
which receives a protected change_cipher_spec record MUST abort the
handshake with an unexpected_message alert.If an implementation
detects a change_cipher_spec record received before the first
ClientHello message or after the peers Finished message, it MUST be
treated as an unexpected record type (though stateless servers may
not be able to distinguish these cases from allowed cases).
Rescorla Standards Track [Page 77]
RFC 8446 TLS August 2018
Implementations MUST NOT send record types not defined in this
document unless negotiated by some extension.If a TLS
implementation receives an unexpected record type, it MUST terminate
the connection with an unexpected_message alert.New record
content type values are assigned by IANA in the TLS ContentType
registry as described in Section 11.
5.1.Record Layer
The record layer fragments information blocks into TLSPlaintext
records carrying data in chunks of 2^14 bytes or less.Message
boundaries are handled differently depending on the underlying
ContentType.Any future content types MUST specify appropriate
rules.Note that these rules are stricter than what was enforced in
TLS 1.2.
Handshake messages MAY be coalesced into a single TLSPlaintext record
or fragmented across several records, provided that:
Handshake messages MUST NOT be interleaved with other record
types.That is, if a handshake message is split over two or more
records, there MUST NOT be any other records between them.
Handshake messages MUST NOT span key changes.Implementations
MUST verify that all messages immediately preceding a key change
align with a record boundary; if not, then they MUST terminate the
connection with an unexpected_message alert.Because the
ClientHello, EndOfEarlyData, ServerHello, Finished, and KeyUpdate
messages can immediately precede a key change, implementations
MUST send these messages in alignment with a record boundary.
Implementations MUST NOT send zero-length fragments of Handshake
types, even if those fragments contain padding.
Alert messages (Section 6) MUST NOT be fragmented across records, and
multiple alert messages MUST NOT be coalesced into a single
TLSPlaintext record.In other words, a record with an Alert type
MUST contain exactly one message.
Application Data messages contain data that is opaque to TLS.
Application Data messages are always protected.Zero-length
fragments of Application Data MAY be sent, as they are potentially
useful as a traffic analysis countermeasure.Application Data
fragments MAY be split across multiple records or coalesced into a
single record.
Rescorla Standards Track [Page 78]
RFC 8446 TLS
August 2018
enum {
invalid(0),
change_cipher_spec(20),
alert(21),
handshake(22),
application_data(23),
(255)
} ContentType;
struct {
ContentType type;
ProtocolVersion legacy_record_version;
uint16 length;
opaque fragment[TLSPlaintext.length];
} TLSPlaintext;
type:The higher-level protocol used to process the enclosed
fragment.
legacy_record_version:MUST be set to 0x0303 for all records
generated by a TLS 1.3 implementation other than an initial
ClientHello (i.e., one not generated after a HelloRetryRequest),
where it MAY also be 0x0301 for compatibility purposes.This
field is deprecated and MUST be ignored for all purposes.
Previous versions of TLS would use other values in this field
under some circumstances.
length:The length (in bytes) of the following
TLSPlaintext.fragment.The length MUST NOT exceed 2^14 bytes.An
endpoint that receives a record that exceeds this length MUST
terminate the connection with a record_overflow alert.
fragment:The data being transmitted.This value is transparent and
is treated as an independent block to be dealt with by the higher-
level protocol specified by the type field.
This document describes TLS 1.3, which uses the version 0x0304.This
version value is historical, deriving from the use of 0x0301 for
TLS 1.0 and 0x0300 for SSL 3.0.In order to maximize backward
compatibility, a record containing an initial ClientHello SHOULD have
version 0x0301 (reflecting TLS 1.0) and a record containing a second
ClientHello or a ServerHello MUST have version 0x0303 (reflecting
TLS 1.2).When negotiating prior versions of TLS, endpoints follow
the procedure and requirements provided in Appendix D.
Rescorla Standards Track [Page 79]
RFC 8446 TLS August 2018
When record protection has not yet been engaged, TLSPlaintext
structures are written directly onto the wire.Once record
protection has started, TLSPlaintext records are protected and sent
as described in the following section.Note that Application Data
records MUST NOT be written to the wire unprotected (see Section 2
for details).
5.2.Record Payload Protection
The record protection functions translate a TLSPlaintext structure
into a TLSCiphertext structure.The deprotection functions reverse
the process.In TLS 1.3, as opposed to previous versions of TLS, all
ciphers are modeled as Authenticated Encryption with Associated
Data (AEAD) [RFC5116].AEAD functions provide a unified encryption
and authentication operation which turns plaintext into authenticated
ciphertext and back again.Each encrypted record consists of a
plaintext header followed by an encrypted body, which itself contains
a type and optional padding.
struct {
opaque content[TLSPlaintext.length];
ContentType type;
uint8 zeros[length_of_padding];
} TLSInnerPlaintext;
struct {
ContentType opaque_type = application_data; /* 23 */
ProtocolVersion legacy_record_version = 0x0303; /* TLS v1.2 */
uint16 length;
opaque encrypted_record[TLSCiphertext.length];
} TLSCiphertext;
content:The TLSPlaintext.fragment value, containing the byte
encoding of a handshake or an alert message, or the raw bytes of
the applications data to send.
type:The TLSPlaintext.type value containing the content type of the
record.
zeros:An arbitrary-length run of zero-valued bytes may appear in
the cleartext after the type field.This provides an opportunity
for senders to pad any TLS record by a chosen amount as long as
the total stays within record size limits.See Section 5.4 for
more details.
Rescorla Standards Track [Page 80]
RFC 8446 TLS August 2018
opaque_type:The outer opaque_type field of a TLSCiphertext record
is always set to the value 23 (application_data) for outward
compatibility with middleboxes accustomed to parsing previous
versions of TLS.The actual content type of the record is found
in TLSInnerPlaintext.type after decryption.
legacy_record_version:The legacy_record_version field is always
0x0303.TLS 1.3 TLSCiphertexts are not generated until after
TLS 1.3 has been negotiated, so there are no historical
compatibility concerns where other values might be received.Note
that the handshake protocol, including the ClientHello and
ServerHello messages, authenticates the protocol version, so this
value is redundant.
length:The length (in bytes) of the following
TLSCiphertext.encrypted_record, which is the sum of the lengths of
the content and the padding, plus one for the inner content type,
plus any expansion added by the AEAD algorithm.The length
MUST NOT exceed 2^14 + 256 bytes.An endpoint that receives a
record that exceeds this length MUST terminate the connection with
a record_overflow alert.
encrypted_record:The AEAD-encrypted form of the serialized
TLSInnerPlaintext structure.
AEAD algorithms take as input a single key, a nonce, a plaintext, and
additional data to be included in the authentication check, as
described in Section 2.1 of [RFC5116].The key is either the
client_write_key or the server_write_key, the nonce is derived from
the sequence number and the client_write_iv or server_write_iv (see
Section 5.3), and the additional data input is the record header.
I.e.,
additional_data = TLSCiphertext.opaque_type ||
TLSCiphertext.legacy_record_version ||
TLSCiphertext.length
The plaintext input to the AEAD algorithm is the encoded
TLSInnerPlaintext structure.Derivation of traffic keys is defined
in Section 7.3.
The AEAD output consists of the ciphertext output from the AEAD
encryption operation.The length of the plaintext is greater than
the corresponding TLSPlaintext.length due to the inclusion of
TLSInnerPlaintext.type and any padding supplied by the sender.The
length of the AEAD output will generally be larger than the
plaintext, but by an amount that varies with the AEAD algorithm.
Rescorla Standards Track [Page 81]
RFC 8446 TLS August 2018
Since the ciphers might incorporate padding, the amount of overhead
could vary with different lengths of plaintext.Symbolically,
AEADEncrypted =
AEAD-Encrypt(write_key, nonce, additional_data, plaintext)
The encrypted_record field of TLSCiphertext is set to AEADEncrypted.
In order to decrypt and verify, the cipher takes as input the key,
nonce, additional data, and the AEADEncrypted value.The output is
either the plaintext or an error indicating that the decryption
failed.There is no separate integrity check.Symbolically,
plaintext of encrypted_record =
AEAD-Decrypt(peer_write_key, nonce,
additional_data, AEADEncrypted)
If the decryption fails, the receiver MUST terminate the connection
with a bad_record_mac alert.
An AEAD algorithm used in TLS 1.3 MUST NOT produce an expansion
greater than 255 octets.An endpoint that receives a record from its
peer with TLSCiphertext.length larger than 2^14 + 256 octets MUST
terminate the connection with a record_overflow alert.This limit
is derived from the maximum TLSInnerPlaintext length of 2^14 octets +
1 octet for ContentType + the maximum AEAD expansion of 255 octets.
5.3.Per-Record Nonce
A 64-bit sequence number is maintained separately for reading and
writing records.The appropriate sequence number is incremented by
one after reading or writing each record.Each sequence number is
set to zero at the beginning of a connection and whenever the key is
changed; the first record transmitted under a particular traffic key
MUST use sequence number 0.
Because the size of sequence numbers is 64-bit, they should not wrap.
If a TLS implementation would need to wrap a sequence number, it MUST
either rekey (Section 4.6.3) or terminate the connection.
Rescorla Standards Track [Page 82]
RFC 8446 TLS August 2018
Each AEAD algorithm will specify a range of possible lengths for the
per-record nonce, from N_MIN bytes to N_MAX bytes of input [RFC5116].
The length of the TLS per-record nonce (iv_length) is set to the
larger of 8 bytes and N_MIN for the AEAD algorithm (see [RFC5116],
Section 4).An AEAD algorithm where N_MAX is less than 8 bytes
MUST NOT be used with TLS.The per-record nonce for the AEAD
construction is formed as follows:
1.The 64-bit record sequence number is encoded in network byte
order and padded to the left with zeros to iv_length.
2.The padded sequence number is XORed with either the static
client_write_iv or server_write_iv (depending on the role).
The resulting quantity (of length iv_length) is used as the
per-record nonce.
Note: This is a different construction from that in TLS 1.2, which
specified a partially explicit nonce.
5.4.Record Padding
All encrypted TLS records can be padded to inflate the size of the
TLSCiphertext.This allows the sender to hide the size of the
traffic from an observer.
When generating a TLSCiphertext record, implementations MAY choose to
pad.An unpadded record is just a record with a padding length of
zero.Padding is a string of zero-valued bytes appended to the
ContentType field before encryption.Implementations MUST set the
padding octets to all zeros before encrypting.
Application Data records may contain a zero-length
TLSInnerPlaintext.content if the sender desires.This permits
generation of plausibly sized cover traffic in contexts where the
presence or absence of activity may be sensitive.Implementations
MUST NOT send Handshake and Alert records that have a zero-length
TLSInnerPlaintext.content; if such a message is received, the
receiving implementation MUST terminate the connection with an
unexpected_message alert.
Rescorla Standards Track [Page 83]
RFC 8446 TLS August 2018
The padding sent is automatically verified by the record protection
mechanism; upon successful decryption of a
TLSCiphertext.encrypted_record, the receiving implementation scans
the field from the end toward the beginning until it finds a non-zero
octet.This non-zero octet is the content type of the message.This
padding scheme was selected because it allows padding of any
encrypted TLS record by an arbitrary size (from zero up to TLS record
size limits) without introducing new content types.The design also
enforces all-zero padding octets, which allows for quick detection of
padding errors.
Implementations MUST limit their scanning to the cleartext returned
from the AEAD decryption.If a receiving implementation does not
find a non-zero octet in the cleartext, it MUST terminate the
connection with an unexpected_message alert.
The presence of padding does not change the overall record size
limitations: the full encoded TLSInnerPlaintext MUST NOT exceed 2^14
+ 1 octets.If the maximum fragment length is reduced as, for
example, by the record_size_limit extension from [RFC8449] then
the reduced limit applies to the full plaintext, including the
content type and padding.
Selecting a padding policy that suggests when and how much to pad is
a complex topic and is beyond the scope of this specification.If
the application-layer protocol on top of TLS has its own padding, it
may be preferable to pad Application Data TLS records within the
application layer.Padding for encrypted Handshake or Alert records
must still be handled at the TLS layer, though.Later documents may
define padding selection algorithms or define a padding policy
request mechanism through TLS extensions or some other means.
5.5.Limits on Key Usage
There are cryptographic limits on the amount of plaintext which can
be safely encrypted under a given set of keys.[AEAD-LIMITS]
provides an analysis of these limits under the assumption that the
underlying primitive (AES or ChaCha20) has no weaknesses.
Implementations SHOULD do a key update as described in Section 4.6.3
prior to reaching these limits.
For AES-GCM, up to 2^24.5 full-size records (about 24 million) may be
encrypted on a given connection while keeping a safety margin of
approximately 2^-57 for Authenticated Encryption (AE) security.For
ChaCha20/Poly1305, the record sequence number would wrap before the
safety limit is reached.
Rescorla Standards Track [Page 84]
RFC 8446 TLS August 2018
6.Alert Protocol
TLS provides an Alert content type to indicate closure information
and errors.Like other messages, alert messages are encrypted as
specified by the current connection state.
Alert messages convey a description of the alert and a legacy field
that conveyed the severity level of the message in previous versions
of TLS.Alerts are divided into two classes: closure alerts and
error alerts.In TLS 1.3, the severity is implicit in the type of
alert being sent, and the level field can safely be ignored.The
close_notify alert is used to indicate orderly closure of one
direction of the connection.Upon receiving such an alert, the TLS
implementation SHOULD indicate end-of-data to the application.
Error alerts indicate abortive closure of the connection (see
Section 6.2).Upon receiving an error alert, the TLS implementation
SHOULD indicate an error to the application and MUST NOT allow any
further data to be sent or received on the connection.Servers and
clients MUST forget the secret values and keys established in failed
connections, with the exception of the PSKs associated with session
tickets, which SHOULD be discarded if possible.
All the alerts listed in Section 6.2 MUST be sent with
AlertLevel=fatal and MUST be treated as error alerts when received
regardless of the AlertLevel in the message.Unknown Alert types
MUST be treated as error alerts.
Note: TLS defines two generic alerts (see Section 6) to use upon
failure to parse a message.Peers which receive a message which
cannot be parsed according to the syntax (e.g., have a length
extending beyond the message boundary or contain an out-of-range
length) MUST terminate the connection with a decode_error alert.
Peers which receive a message which is syntactically correct but
semantically invalid (e.g., a DHE share of p 1, or an invalid enum)
MUST terminate the connection with an illegal_parameter alert.
Rescorla Standards Track [Page 85]
RFC 8446 TLS
August 2018
enum { warning(1), fatal(2), (255) } AlertLevel;
enum {
close_notify(0),
unexpected_message(10),
bad_record_mac(20),
record_overflow(22),
handshake_failure(40),
bad_certificate(42),
unsupported_certificate(43),
certificate_revoked(44),
certificate_expired(45),
certificate_unknown(46),
illegal_parameter(47),
unknown_ca(48),
access_denied(49),
decode_error(50),
decrypt_error(51),
protocol_version(70),
insufficient_security(71),
internal_error(80),
inappropriate_fallback(86),
user_canceled(90),
missing_extension(109),
unsupported_extension(110),
unrecognized_name(112),
bad_certificate_status_response(113),
unknown_psk_identity(115),
certificate_required(116),
no_application_protocol(120),
(255)
} AlertDescription;
struct {
AlertLevel level;
AlertDescription description;
} Alert;
Rescorla Standards Track
[Page 86]
RFC 8446 TLS August 2018
6.1.Closure Alerts
The client and the server must share knowledge that the connection is
ending in order to avoid a truncation attack.
close_notify:This alert notifies the recipient that the sender will
not send any more messages on this connection.Any data received
after a closure alert has been received MUST be ignored.
user_canceled:This alert notifies the recipient that the sender is
canceling the handshake for some reason unrelated to a protocol
failure.If a user cancels an operation after the handshake is
complete, just closing the connection by sending a close_notify
is more appropriate.This alert SHOULD be followed by a
close_notify.This alert generally has AlertLevel=warning.
Either party MAY initiate a close of its write side of the connection
by sending a close_notify alert.Any data received after a closure
alert has been received MUST be ignored.If a transport-level close
is received prior to a close_notify, the receiver cannot know that
all the data that was sent has been received.
Each party MUST send a close_notify alert before closing its write
side of the connection, unless it has already sent some error alert.
This does not have any effect on its read side of the connection.
Note that this is a change from versions of TLS prior to TLS 1.3 in
which implementations were required to react to a close_notify by
discarding pending writes and sending an immediate close_notify
alert of their own.That previous requirement could cause truncation
in the read side.Both parties need not wait to receive a
close_notify alert before closing their read side of the
connection, though doing so would introduce the possibility of
truncation.
If the application protocol using TLS provides that any data may be
carried over the underlying transport after the TLS connection is
closed, the TLS implementation MUST receive a close_notify alert
before indicating end-of-data to the application layer.No part of
this standard should be taken to dictate the manner in which a usage
profile for TLS manages its data transport, including when
connections are opened or closed.
Note: It is assumed that closing the write side of a connection
reliably delivers pending data before destroying the transport.
Rescorla Standards Track [Page 87]
RFC 8446 TLS August 2018
6.2.Error Alerts
Error handling in TLS is very simple.When an error is detected, the
detecting party sends a message to its peer.Upon transmission or
receipt of a fatal alert message, both parties MUST immediately close
the connection.
Whenever an implementation encounters a fatal error condition, it
SHOULD send an appropriate fatal alert and MUST close the connection
without sending or receiving any additional data.In the rest of
this specification, when the phrases terminate the connection and
abort the handshake are used without a specific alert it means that
the implementation SHOULD send the alert indicated by the
descriptions below.The phrases terminate the connection with an X
alert and abort the handshake with an X alert mean that the
implementation MUST send alert X if it sends any alert.All alerts
defined below in this section, as well as all unknown alerts, are
universally considered fatal as of TLS 1.3 (see Section 6).The
implementation SHOULD provide a way to facilitate logging the sending
and receiving of alerts.
The following error alerts are defined:
unexpected_message:An inappropriate message (e.g., the wrong
handshake message, premature Application Data, etc.) was received.
This alert should never be observed in communication between
proper implementations.
bad_record_mac:This alert is returned if a record is received which
cannot be deprotected.Because AEAD algorithms combine decryption
and verification, and also to avoid side-channel attacks, this
alert is used for all deprotection failures.This alert should
never be observed in communication between proper implementations,
except when messages were corrupted in the network.
record_overflow:A TLSCiphertext record was received that had a
length more than 2^14 + 256 bytes, or a record decrypted to a
TLSPlaintext record with more than 2^14 bytes (or some other
negotiated limit).This alert should never be observed in
communication between proper implementations, except when messages
were corrupted in the network.
handshake_failure:Receipt of a handshake_failure alert message
indicates that the sender was unable to negotiate an acceptable
set of security parameters given the options available.
bad_certificate:A certificate was corrupt, contained signatures
that did not verify correctly, etc.
Rescorla Standards Track [Page 88]
RFC 8446 TLS August 2018
unsupported_certificate:A certificate was of an unsupported type.
certificate_revoked:A certificate was revoked by its signer.
certificate_expired:A certificate has expired or is not currently
valid.
certificate_unknown:Some other (unspecified) issue arose in
processing the certificate, rendering it unacceptable.
illegal_parameter:A field in the handshake was incorrect or
inconsistent with other fields.This alert is used for errors
which conform to the formal protocol syntax but are otherwise
incorrect.
unknown_ca:A valid certificate chain or partial chain was received,
but the certificate was not accepted because the CA certificate
could not be located or could not be matched with a known trust
anchor.
access_denied:A valid certificate or PSK was received, but when
access control was applied, the sender decided not to proceed with
negotiation.
decode_error:A message could not be decoded because some field was
out of the specified range or the length of the message was
incorrect.This alert is used for errors where the message does
not conform to the formal protocol syntax.This alert should
never be observed in communication between proper implementations,
except when messages were corrupted in the network.
decrypt_error:A handshake (not record layer) cryptographic
operation failed, including being unable to correctly verify a
signature or validate a Finished message or a PSK binder.
protocol_version:The protocol version the peer has attempted to
negotiate is recognized but not supported (see Appendix D).
insufficient_security:Returned instead of handshake_failure when
a negotiation has failed specifically because the server requires
parameters more secure than those supported by the client.
internal_error:An internal error unrelated to the peer or the
correctness of the protocol (such as a memory allocation failure)
makes it impossible to continue.
inappropriate_fallback:Sent by a server in response to an invalid
connection retry attempt from a client (see [RFC7507]).
Rescorla Standards Track [Page 89]
RFC 8446 TLS August 2018
missing_extension:Sent by endpoints that receive a handshake
message not containing an extension that is mandatory to send for
the offered TLS version or other negotiated parameters.
unsupported_extension:Sent by endpoints receiving any handshake
message containing an extension known to be prohibited for
inclusion in the given handshake message, or including any
extensions in a ServerHello or Certificate not first offered in
the corresponding ClientHello or CertificateRequest.
unrecognized_name:Sent by servers when no server exists identified
by the name provided by the client via the server_name extension
(see [RFC6066]).
bad_certificate_status_response:Sent by clients when an invalid or
unacceptable OCSP response is provided by the server via the
status_request extension (see [RFC6066]).
unknown_psk_identity:Sent by servers when PSK key establishment is
desired but no acceptable PSK identity is provided by the client.
Sending this alert is OPTIONAL; servers MAY instead choose to send
a decrypt_error alert to merely indicate an invalid PSK
identity.
certificate_required:Sent by servers when a client certificate is
desired but none was provided by the client.
no_application_protocol:Sent by servers when a client
application_layer_protocol_negotiation extension advertises only
protocols that the server does not support (see [RFC7301]).
New Alert values are assigned by IANA as described in Section 11.
7.Cryptographic Computations
The TLS handshake establishes one or more input secrets which are
combined to create the actual working keying material, as detailed
below.The key derivation process incorporates both the input
secrets and the handshake transcript.Note that because the
handshake transcript includes the random values from the Hello
messages, any given handshake will have different traffic secrets,
even if the same input secrets are used, as is the case when the same
PSK is used for multiple connections.
Rescorla Standards Track [Page 90]
RFC 8446 TLS August 2018
7.1.Key Schedule
The key derivation process makes use of the HKDF-Extract and
HKDF-Expand functions as defined for HKDF [RFC5869], as well as the
functions defined below:
HKDF-Expand-Label(Secret, Label, Context, Length) =
HKDF-Expand(Secret, HkdfLabel, Length)
Where HkdfLabel is specified as:
struct {
uint16 length = Length;
opaque label<7..255> = tls13 + Label;
opaque context<0..255> = Context;
} HkdfLabel;
Derive-Secret(Secret, Label, Messages) =
HKDF-Expand-Label(Secret, Label,
Transcript-Hash(Messages), Hash.length)
The Hash function used by Transcript-Hash and HKDF is the cipher
suite hash algorithm.Hash.length is its output length in bytes.
Messages is the concatenation of the indicated handshake messages,
including the handshake message type and length fields, but not
including record layer headers.Note that in some cases a zero-
length Context (indicated by ) is passed to HKDF-Expand-Label.The
labels specified in this document are all ASCII strings and do not
include a trailing NUL byte.
Note: With common hash functions, any label longer than 12 characters
requires an additional iteration of the hash function to compute.
The labels in this specification have all been chosen to fit within
this limit.
Rescorla Standards Track [Page 91]
RFC 8446 TLS August 2018
Keys are derived from two input secrets using the HKDF-Extract and
Derive-Secret functions.The general pattern for adding a new secret
is to use HKDF-Extract with the Salt being the current secret state
and the Input Keying Material (IKM) being the new secret to be added.
In this version of TLS 1.3, the two input secrets are:
PSK (a pre-shared key established externally or derived from the
resumption_master_secret value from a previous connection)
(EC)DHE shared secret (Section 7.4)
This produces a full key derivation schedule shown in the diagram
below.In this diagram, the following formatting conventions apply:
HKDF-Extract is drawn as taking the Salt argument from the top and
the IKM argument from the left, with its output to the bottom and
the name of the output on the right.
Derive-Secrets Secret argument is indicated by the incoming
arrow.For instance, the Early Secret is the Secret for
generating the client_early_traffic_secret.
0 indicates a string of Hash.length bytes set to zero.
Rescorla Standards Track [Page 92]
RFC 8446
TLS August 2018
0 | v
PSK ->HKDF-Extract = Early Secret
|
+> Derive-Secret(., ext binder | res binder, )
| = binder_key
|
+> Derive-Secret(., c e traffic, ClientHello)
| = client_early_traffic_secret
|
+> Derive-Secret(., e exp master, ClientHello)
| = early_exporter_master_secret
v
Derive-Secret(., derived, )
|
v
(EC)DHE -> HKDF-Extract = Handshake Secret
|
+> Derive-Secret(., c hs traffic,
| ClientHelloServerHello)
| = client_handshake_traffic_secret
|
+> Derive-Secret(., s hs traffic,
| ClientHelloServerHello)
| = server_handshake_traffic_secret
v
Derive-Secret(., derived, )
|
v
0 -> HKDF-Extract = Master Secret
Rescorla
|
+> Derive-Secret(., c ap traffic,
| ClientHelloserver Finished)
| = client_application_traffic_secret_0
|
+> Derive-Secret(., s ap traffic,
| ClientHelloserver Finished)
| = server_application_traffic_secret_0
|
+> Derive-Secret(., exp master,
| ClientHelloserver Finished)
| = exporter_master_secret
|
+> Derive-Secret(., res master,
ClientHelloclient Finished)
= resumption_master_secret
Standards Track [Page 93]
RFC 8446 TLS August 2018
The general pattern here is that the secrets shown down the left side
of the diagram are just raw entropy without context, whereas the
secrets down the right side include Handshake Context and therefore
can be used to derive working keys without additional context.Note
that the different calls to Derive-Secret may take different Messages
arguments, even with the same secret.In a 0-RTT exchange,
Derive-Secret is called with four distinct transcripts; in a
1-RTT-only exchange, it is called with three distinct transcripts.
If a given secret is not available, then the 0-value consisting of a
string of Hash.length bytes set to zeros is used.Note that this
does not mean skipping rounds, so if PSK is not in use, Early Secret
will still be HKDF-Extract(0, 0).For the computation of the
binder_key, the label is ext binder for external PSKs (those
provisioned outside of TLS) and res binder for resumption PSKs
(those provisioned as the resumption master secret of a previous
handshake).The different labels prevent the substitution of one
type of PSK for the other.
There are multiple potential Early Secret values, depending on which
PSK the server ultimately selects.The client will need to compute
one for each potential PSK; if no PSK is selected, it will then need
to compute the Early Secret corresponding to the zero PSK.
Once all the values which are to be derived from a given secret have
been computed, that secret SHOULD be erased.
7.2.Updating Traffic Secrets
Once the handshake is complete, it is possible for either side to
update its sending traffic keys using the KeyUpdate handshake message
defined in Section 4.6.3.The next generation of traffic keys is
computed by generating client_/server_application_traffic_secret_N+1
from client_/server_application_traffic_secret_N as described in this
section and then re-deriving the traffic keys as described in
Section 7.3.
The next-generation application_traffic_secret is computed as:
application_traffic_secret_N+1 =
HKDF-Expand-Label(application_traffic_secret_N,
traffic upd, , Hash.length)
Once client_/server_application_traffic_secret_N+1 and its associated
traffic keys have been computed, implementations SHOULD delete
client_/server_application_traffic_secret_N and its associated
traffic keys.
Rescorla Standards Track [Page 94]
RFC 8446 TLS August 2018
7.3.Traffic Key Calculation
The traffic keying material is generated from the following input
values:
A secret value
A purpose value indicating the specific value being generated
The length of the key being generated
The traffic keying material is generated from an input traffic secret
value using:
[sender]_write_key = HKDF-Expand-Label(Secret, key, , key_length)
[sender]_write_iv= HKDF-Expand-Label(Secret, iv, , iv_length)
[sender] denotes the sending side.The value of Secret for each
record type is shown in the table below.
+-++ | Record Type | Secret | +-++ | 0-RTT Application | client_early_traffic_secret | ||| | Handshake | [sender]_handshake_traffic_secret | ||| | Application Data | [sender]_application_traffic_secret_N | +-++
All the traffic keying material is recomputed whenever the underlying
Secret changes (e.g., when changing from the handshake to Application
Data keys or upon a key update).
7.4.(EC)DHE Shared Secret Calculation
7.4.1.Finite Field Diffie-Hellman
For finite field groups, a conventional Diffie-Hellman [DH76]
computation is performed.The negotiated key (Z) is converted to a
byte string by encoding in big-endian form and left-padded with zeros
up to the size of the prime.This byte string is used as the shared
secret in the key schedule as specified above.
Note that this construction differs from previous versions of TLS
which removed leading zeros.
Rescorla Standards Track [Page 95]
RFC 8446 TLS August 2018
7.4.2.Elliptic Curve Diffie-Hellman
For secp256r1, secp384r1, and secp521r1, ECDH calculations (including
parameter and key generation as well as the shared secret
calculation) are performed according to [IEEE1363] using the
ECKAS-DH1 scheme with the identity map as the key derivation function
(KDF), so that the shared secret is the x-coordinate of the ECDH
shared secret elliptic curve point represented as an octet string.
Note that this octet string (Z in IEEE 1363 terminology) as output
by FE2OSP (the Field Element to Octet String Conversion Primitive)
has constant length for any given field; leading zeros found in this
octet string MUST NOT be truncated.
(Note that this use of the identity KDF is a technicality.The
complete picture is that ECDH is employed with a non-trivial KDF
because TLS does not directly use this secret for anything other than
for computing other secrets.)
For X25519 and X448, the ECDH calculations are as follows:
The public key to put into the KeyShareEntry.key_exchange
structure is the result of applying the ECDH scalar multiplication
function to the secret key of appropriate length (into scalar
input) and the standard public basepoint (into u-coordinate point
input).
The ECDH shared secret is the result of applying the ECDH scalar
multiplication function to the secret key (into scalar input) and
the peers public key (into u-coordinate point input).The output
is used raw, with no processing.
For these curves, implementations SHOULD use the approach specified
in [RFC7748] to calculate the Diffie-Hellman shared secret.
Implementations MUST check whether the computed Diffie-Hellman shared
secret is the all-zero value and abort if so, as described in
Section 6 of [RFC7748].If implementors use an alternative
implementation of these elliptic curves, they SHOULD perform the
additional checks specified in Section 7 of [RFC7748].
Rescorla Standards Track [Page 96]
RFC 8446 TLS August 2018
7.5.Exporters
[RFC5705] defines keying material exporters for TLS in terms of the
TLS pseudorandom function (PRF).This document replaces the PRF with
HKDF, thus requiring a new construction.The exporter interface
remains the same.
The exporter value is computed as:
TLS-Exporter(label, context_value, key_length) =
HKDF-Expand-Label(Derive-Secret(Secret, label, ),
exporter, Hash(context_value), key_length)
Where Secret is either the early_exporter_master_secret or the
exporter_master_secret.Implementations MUST use the
exporter_master_secret unless explicitly specified by the
application.The early_exporter_master_secret is defined for use in
settings where an exporter is needed for 0-RTT data.A separate
interface for the early exporter is RECOMMENDED; this avoids the
exporter user accidentally using an early exporter when a regular one
is desired or vice versa.
If no context is provided, the context_value is zero length.
Consequently, providing no context computes the same value as
providing an empty context.This is a change from previous versions
of TLS where an empty context produced a different output than an
absent context.As of this documents publication, no allocated
exporter label is used both with and without a context.Future
specifications MUST NOT define a use of exporters that permit both an
empty context and no context with the same label.New uses of
exporters SHOULD provide a context in all exporter computations,
though the value could be empty.
Requirements for the format of exporter labels are defined in
Section 4 of [RFC5705].
Rescorla Standards Track [Page 97]
RFC 8446 TLS August 2018
8.0-RTT and Anti-Replay
As noted in Section 2.3 and Appendix E.5, TLS does not provide
inherent replay protections for 0-RTT data.There are two potential
threats to be concerned with:
Network attackers who mount a replay attack by simply duplicating
a flight of 0-RTT data.
Network attackers who take advantage of client retry behavior to
arrange for the server to receive multiple copies of an
application message.This threat already exists to some extent
because clients that value robustness respond to network errors by
attempting to retry requests.However, 0-RTT adds an additional
dimension for any server system which does not maintain globally
consistent server state.Specifically, if a server system has
multiple zones where tickets from zone A will not be accepted in
zone B, then an attacker can duplicate a ClientHello and early
data intended for A to both A and B.At A, the data will be
accepted in 0-RTT, but at B the server will reject 0-RTT data and
instead force a full handshake.If the attacker blocks the
ServerHello from A, then the client will complete the handshake
with B and probably retry the request, leading to duplication on
the server system as a whole.
The first class of attack can be prevented by sharing state to
guarantee that the 0-RTT data is accepted at most once.Servers
SHOULD provide that level of replay safety by implementing one of the
methods described in this section or by equivalent means.It is
understood, however, that due to operational concerns not all
deployments will maintain state at that level.Therefore, in normal
operation, clients will not know which, if any, of these mechanisms
servers actually implement and hence MUST only send early data which
they deem safe to be replayed.
In addition to the direct effects of replays, there is a class of
attacks where even operations normally considered idempotent could be
exploited by a large number of replays (timing attacks, resource
limit exhaustion and others, as described in Appendix E.5).Those
can be mitigated by ensuring that every 0-RTT payload can be replayed
only a limited number of times.The server MUST ensure that any
instance of it (be it a machine, a thread, or any other entity within
the relevant serving infrastructure) would accept 0-RTT for the same
0-RTT handshake at most once; this limits the number of replays to
the number of server instances in the deployment.Such a guarantee
can be accomplished by locally recording data from recently received
ClientHellos and rejecting repeats, or by any other method that
Rescorla Standards Track [Page 98]
RFC 8446 TLS August 2018
provides the same or a stronger guarantee.The at most once per
server instance guarantee is a minimum requirement; servers SHOULD
limit 0-RTT replays further when feasible.
The second class of attack cannot be prevented at the TLS layer and
MUST be dealt with by any application.Note that any application
whose clients implement any kind of retry behavior already needs to
implement some sort of anti-replay defense.
8.1.Single-Use Tickets
The simplest form of anti-replay defense is for the server to only
allow each session ticket to be used once.For instance, the server
can maintain a database of all outstanding valid tickets, deleting
each ticket from the database as it is used.If an unknown ticket is
provided, the server would then fall back to a full handshake.
If the tickets are not self-contained but rather are database keys,
and the corresponding PSKs are deleted upon use, then connections
established using PSKs enjoy forward secrecy.This improves security
for all 0-RTT data and PSK usage when PSK is used without (EC)DHE.
Because this mechanism requires sharing the session database between
server nodes in environments with multiple distributed servers, it
may be hard to achieve high rates of successful PSK 0-RTT connections
when compared to self-encrypted tickets.Unlike session databases,
session tickets can successfully do PSK-based session establishment
even without consistent storage, though when 0-RTT is allowed they
still require consistent storage for anti-replay of 0-RTT data, as
detailed in the following section.
8.2.Client Hello Recording
An alternative form of anti-replay is to record a unique value
derived from the ClientHello (generally either the random value or
the PSK binder) and reject duplicates.Recording all ClientHellos
causes state to grow without bound, but a server can instead record
ClientHellos within a given time window and use the
obfuscated_ticket_age to ensure that tickets arent reused outside
that window.
In order to implement this, when a ClientHello is received, the
server first verifies the PSK binder as described in Section 4.2.11.
It then computes the expected_arrival_time as described in the next
section and rejects 0-RTT if it is outside the recording window,
falling back to the 1-RTT handshake.
Rescorla Standards Track [Page 99]
RFC 8446 TLS August 2018
If the expected_arrival_time is in the window, then the server checks
to see if it has recorded a matching ClientHello.If one is found,
it either aborts the handshake with an illegal_parameter alert or
accepts the PSK but rejects 0-RTT.If no matching ClientHello is
found, then it accepts 0-RTT and then stores the ClientHello for as
long as the expected_arrival_time is inside the window.Servers MAY
also implement data stores with false positives, such as Bloom
filters, in which case they MUST respond to apparent replay by
rejecting 0-RTT but MUST NOT abort the handshake.
The server MUST derive the storage key only from validated sections
of the ClientHello.If the ClientHello contains multiple PSK
identities, then an attacker can create multiple ClientHellos with
different binder values for the less-preferred identity on the
assumption that the server will not verify it (as recommended by
Section 4.2.11).I.e., if the client sends PSKs A and B but the
server prefers A, then the attacker can change the binder for B
without affecting the binder for A.If the binder for B is part of
the storage key, then this ClientHello will not appear as a
duplicate, which will cause the ClientHello to be accepted, and may
cause side effects such as replay cache pollution, although any 0-RTT
data will not be decryptable because it will use different keys.If
the validated binder or the ClientHello.random is used as the storage
key, then this attack is not possible.
Because this mechanism does not require storing all outstanding
tickets, it may be easier to implement in distributed systems with
high rates of resumption and 0-RTT, at the cost of potentially weaker
anti-replay defense because of the difficulty of reliably storing and
retrieving the received ClientHello messages.In many such systems,
it is impractical to have globally consistent storage of all the
received ClientHellos.In this case, the best anti-replay protection
is provided by having a single storage zone be authoritative for a
given ticket and refusing 0-RTT for that ticket in any other zone.
This approach prevents simple replay by the attacker because only one
zone will accept 0-RTT data.A weaker design is to implement
separate storage for each zone but allow 0-RTT in any zone.This
approach limits the number of replays to once per zone.Application
message duplication of course remains possible with either design.
When implementations are freshly started, they SHOULD reject 0-RTT as
long as any portion of their recording window overlaps the startup
time.Otherwise, they run the risk of accepting replays which were
originally sent during that period.
Rescorla Standards Track[Page 100]
RFC 8446 TLS August 2018
Note: If the clients clock is running much faster than the servers,
then a ClientHello may be received that is outside the window in the
future, in which case it might be accepted for 1-RTT, causing a
client retry, and then acceptable later for 0-RTT.This is another
variant of the second form of attack described in Section 8.
8.3.Freshness Checks
Because the ClientHello indicates the time at which the client sent
it, it is possible to efficiently determine whether a ClientHello was
likely sent reasonably recently and only accept 0-RTT for such a
ClientHello, otherwise falling back to a 1-RTT handshake.This is
necessary for the ClientHello storage mechanism described in
Section 8.2 because otherwise the server needs to store an unlimited
number of ClientHellos, and is a useful optimization for self-
contained single-use tickets because it allows efficient rejection of
ClientHellos which cannot be used for 0-RTT.
In order to implement this mechanism, a server needs to store the
time that the server generated the session ticket, offset by an
estimate of the round-trip time between client and server.I.e.,
adjusted_creation_time = creation_time + estimated_RTT
This value can be encoded in the ticket, thus avoiding the need to
keep state for each outstanding ticket.The server can determine the
clients view of the age of the ticket by subtracting the tickets
ticket_age_add value from the obfuscated_ticket_age parameter in
the clients pre_shared_key extension.The server can determine
the expected_arrival_time of the ClientHello as:
expected_arrival_time = adjusted_creation_time + clients_ticket_age
When a new ClientHello is received, the expected_arrival_time is then
compared against the current server wall clock time and if they
differ by more than a certain amount, 0-RTT is rejected, though the
1-RTT handshake can be allowed to complete.
Rescorla Standards Track[Page 101]
RFC 8446 TLS August 2018
There are several potential sources of error that might cause
mismatches between the expected_arrival_time and the measured time.
Variations in client and server clock rates are likely to be minimal,
though potentially the absolute times may be off by large values.
Network propagation delays are the most likely causes of a mismatch
in legitimate values for elapsed time.Both the NewSessionTicket and
ClientHello messages might be retransmitted and therefore delayed,
which might be hidden by TCP.For clients on the Internet, this
implies windows on the order of ten seconds to account for errors in
clocks and variations in measurements; other deployment scenarios may
have different needs.Clock skew distributions are not symmetric, so
the optimal tradeoff may involve an asymmetric range of permissible
mismatch values.
Note that freshness checking alone is not sufficient to prevent
replays because it does not detect them during the error window,
which depending on bandwidth and system capacity could include
billions of replays in real-world settings.In addition, this
freshness checking is only done at the time the ClientHello is
received and not when subsequent early Application Data records are
received.After early data is accepted, records may continue to be
streamed to the server over a longer time period.
9.Compliance Requirements
9.1.Mandatory-to-Implement Cipher Suites
In the absence of an application profile standard specifying
otherwise:
A TLS-compliant application MUST implement the TLS_AES_128_GCM_SHA256
[GCM] cipher suite and SHOULD implement the TLS_AES_256_GCM_SHA384
[GCM] and TLS_CHACHA20_POLY1305_SHA256 [RFC8439] cipher suites (see
Appendix B.4).
A TLS-compliant application MUST support digital signatures with
rsa_pkcs1_sha256 (for certificates), rsa_pss_rsae_sha256 (for
CertificateVerify and certificates), and ecdsa_secp256r1_sha256.A
TLS-compliant application MUST support key exchange with secp256r1
(NIST P-256) and SHOULD support key exchange with X25519 [RFC7748].
Rescorla Standards Track[Page 102]
RFC 8446 TLS August 2018
9.2.Mandatory-to-Implement Extensions
In the absence of an application profile standard specifying
otherwise, a TLS-compliant application MUST implement the following
TLS extensions:
Supported Versions (supported_versions; Section 4.2.1)
Cookie (cookie; Section 4.2.2)
Signature Algorithms (signature_algorithms; Section 4.2.3)
Signature Algorithms Certificate (signature_algorithms_cert;
Section 4.2.3)
Negotiated Groups (supported_groups; Section 4.2.7)
Key Share (key_share; Section 4.2.8)
Server Name Indication (server_name; Section 3 of [RFC6066])
All implementations MUST send and use these extensions when offering
applicable features:
supported_versions is REQUIRED for all ClientHello, ServerHello,
and HelloRetryRequest messages.
signature_algorithms is REQUIRED for certificate authentication.
supported_groups is REQUIRED for ClientHello messages using DHE
or ECDHE key exchange.
key_share is REQUIRED for DHE or ECDHE key exchange.
pre_shared_key is REQUIRED for PSK key agreement.
psk_key_exchange_modes is REQUIRED for PSK key agreement.
Rescorla Standards Track[Page 103]
RFC 8446 TLS August 2018
A client is considered to be attempting to negotiate using this
specification if the ClientHello contains a supported_versions
extension with 0x0304 contained in its body.Such a ClientHello
message MUST meet the following requirements:
If not containing a pre_shared_key extension, it MUST contain
both a signature_algorithms extension and a supported_groups
extension.
If containing a supported_groups extension, it MUST also contain
a key_share extension, and vice versa.An empty
KeyShare.client_shares vector is permitted.
Servers receiving a ClientHello which does not conform to these
requirements MUST abort the handshake with a missing_extension
alert.
Additionally, all implementations MUST support the use of the
server_name extension with applications capable of using it.
Servers MAY require clients to send a valid server_name extension.
Servers requiring this extension SHOULD respond to a ClientHello
lacking a server_name extension by terminating the connection with
a missing_extension alert.
9.3.Protocol Invariants
This section describes invariants that TLS endpoints and middleboxes
MUST follow.It also applies to earlier versions of TLS.
TLS is designed to be securely and compatibly extensible.Newer
clients or servers, when communicating with newer peers, should
negotiate the most preferred common parameters.The TLS handshake
provides downgrade protection: Middleboxes passing traffic between a
newer client and newer server without terminating TLS should be
unable to influence the handshake (see Appendix E.1).At the same
time, deployments update at different rates, so a newer client or
server MAY continue to support older parameters, which would allow it
to interoperate with older endpoints.
Rescorla Standards Track[Page 104]
RFC 8446 TLS August 2018
For this to work, implementations MUST correctly handle extensible
fields:
A client sending a ClientHello MUST support all parameters
advertised in it.Otherwise, the server may fail to interoperate
by selecting one of those parameters.
A server receiving a ClientHello MUST correctly ignore all
unrecognized cipher suites, extensions, and other parameters.
Otherwise, it may fail to interoperate with newer clients.In
TLS 1.3, a client receiving a CertificateRequest or
NewSessionTicket MUST also ignore all unrecognized extensions.
A middlebox which terminates a TLS connection MUST behave as a
compliant TLS server (to the original client), including having a
certificate which the client is willing to accept, and also as a
compliant TLS client (to the original server), including verifying
the original servers certificate.In particular, it MUST
generate its own ClientHello containing only parameters it
understands, and it MUST generate a fresh ServerHello random
value, rather than forwarding the endpoints value.
Note that TLSs protocol requirements and security analysis only
apply to the two connections separately.Safely deploying a TLS
terminator requires additional security considerations which are
beyond the scope of this document.
A middlebox which forwards ClientHello parameters it does not
understand MUST NOT process any messages beyond that ClientHello.
It MUST forward all subsequent traffic unmodified.Otherwise, it
may fail to interoperate with newer clients and servers.
Forwarded ClientHellos may contain advertisements for features not
supported by the middlebox, so the response may include future TLS
additions the middlebox does not recognize.These additions MAY
change any message beyond the ClientHello arbitrarily.In
particular, the values sent in the ServerHello might change, the
ServerHello format might change, and the TLSCiphertext format
might change.
The design of TLS 1.3 was constrained by widely deployed
non-compliant TLS middleboxes (see Appendix D.4); however, it does
not relax the invariants.Those middleboxes continue to be
non-compliant.
Rescorla Standards Track[Page 105]
RFC 8446 TLS August 2018
10.Security Considerations
Security issues are discussed throughout this memo, especially in
Appendices C, D, and E.
11.IANA Considerations
This document uses several registries that were originally created in
[RFC4346] and updated in [RFC8447].IANA has updated these to
reference this document.The registries and their allocation
policies are below:
TLS Cipher Suites registry: values with the first byte in the
range 0-254 (decimal) are assigned via Specification Required
[RFC8126].Values with the first byte 255 (decimal) are reserved
for Private Use [RFC8126].
IANA has added the cipher suites listed in Appendix B.4 to the
registry.The Value and Description columns are taken from
the table.The DTLS-OK and Recommended columns are both
marked as Y for each new cipher suite.
TLS ContentType registry: Future values are allocated via
Standards Action [RFC8126].
TLS Alerts registry: Future values are allocated via Standards
Action [RFC8126].IANA has populated this registry with the
values from Appendix B.2.The DTLS-OK column is marked as Y
for all such values.Values marked as _RESERVED have comments
describing their previous usage.
TLS HandshakeType registry: Future values are allocated via
Standards Action [RFC8126].IANA has updated this registry to
rename item 4 from NewSessionTicket to new_session_ticket and
populated this registry with the values from Appendix B.3.The
DTLS-OK column is marked as Y for all such values.Values
marked _RESERVED have comments describing their previous or
temporary usage.
Rescorla Standards Track[Page 106]
RFC 8446 TLS August 2018
This document also uses the TLS ExtensionType Values registry
originally created in [RFC4366].IANA has updated it to reference
this document.Changes to the registry follow:
IANA has updated the registration policy as follows:
Values with the first byte in the range 0-254 (decimal) are
assigned via Specification Required [RFC8126].Values with the
first byte 255 (decimal) are reserved for Private Use [RFC8126].
IANA has updated this registry to include the key_share,
pre_shared_key, psk_key_exchange_modes, early_data,
cookie, supported_versions, certificate_authorities,
oid_filters, post_handshake_auth, and
signature_algorithms_cert extensions with the values defined in
this document and the Recommended value of Y.
IANA has updated this registry to include a TLS 1.3 column which
lists the messages in which the extension may appear.This column
has been initially populated from the table in Section 4.2, with
any extension not listed there marked as – to indicate that it
is not used by TLS 1.3.
This document updates an entry in the TLS Certificate Types registry
originally created in [RFC6091] and updated in [RFC8447].IANA has
updated the entry for value 1 to have the name OpenPGP_RESERVED,
Recommended value N, and comment Used in TLS versions prior
to 1.3.
This document updates an entry in the TLS Certificate Status Types
registry originally created in [RFC6961].IANA has updated the entry
for value 2 to have the name ocsp_multi_RESERVED and comment Used
in TLS versions prior to 1.3.
This document updates two entries in the TLS Supported Groups
registry (created under a different name by [RFC4492]; now maintained
by [RFC8422]) and updated by [RFC7919] and [RFC8447].The entries
for values 29 and 30 (x25519 and x448) have been updated to also
refer to this document.
Rescorla Standards Track[Page 107]
RFC 8446 TLS August 2018
In addition, this document defines two new registries that are
maintained by IANA:
TLS SignatureScheme registry: Values with the first byte in the
range 0-253 (decimal) are assigned via Specification Required
[RFC8126].Values with the first byte 254 or 255 (decimal) are
reserved for Private Use [RFC8126].Values with the first byte in
the range 0-6 or with the second byte in the range 0-3 that are
not currently allocated are reserved for backward compatibility.
This registry has a Recommended column.The registry has been
initially populated with the values described in Section 4.2.3.
The following values are marked as Recommended:
ecdsa_secp256r1_sha256, ecdsa_secp384r1_sha384,
rsa_pss_rsae_sha256, rsa_pss_rsae_sha384, rsa_pss_rsae_sha512,
rsa_pss_pss_sha256, rsa_pss_pss_sha384, rsa_pss_pss_sha512, and
ed25519.The Recommended column is assigned a value of N
unless explicitly requested, and adding a value with a
Recommended value of Y requires Standards Action [RFC8126].
IESG Approval is REQUIRED for a Y->N transition.
TLS PskKeyExchangeMode registry: Values in the range 0-253
(decimal) are assigned via Specification Required [RFC8126].
The values 254 and 255 (decimal) are reserved for Private Use
[RFC8126].This registry has a Recommended column.The
registry has been initially populated with psk_ke (0) and
psk_dhe_ke (1).Both are marked as Recommended.The
Recommended column is assigned a value of N unless explicitly
requested, and adding a value with a Recommended value of Y
requires Standards Action [RFC8126].IESG Approval is REQUIRED
for a Y->N transition.
Rescorla Standards Track[Page 108]
RFC 8446 TLS August 2018
12.References
12.1.Normative References
[DH76]
[ECDSA]
[GCM]
Diffie, W. and M. Hellman, New directions in
cryptography, IEEE Transactions on Information
Theory, Vol. 22 No. 6, pp. 644-654,
DOI 10.1109/TIT.1976.1055638, November 1976.
American National Standards Institute, Public Key
Cryptography for the Financial Services Industry: The
Elliptic Curve Digital Signature Algorithm (ECDSA),
ANSI ANS X9.62-2005, November 2005.
Dworkin, M., Recommendation for Block Cipher Modes of
Operation: Galois/Counter Mode (GCM) and GMAC,
NIST Special Publication 800-38D,
DOI 10.6028/NIST.SP.800-38D, November 2007.
[RFC2104]Krawczyk, H., Bellare, M., and R. Canetti, HMAC: Keyed-
Hashing for Message Authentication, RFC 2104,
DOI 10.17487/RFC2104, February 1997,
[RFC2119]Bradner, S., Key words for use in RFCs to Indicate
Requirement Levels, BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
[RFC5116]McGrew, D., An Interface and Algorithms for Authenticated
Encryption, RFC 5116, DOI 10.17487/RFC5116, January 2008,
[RFC5280]Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
Housley, R., and W. Polk, Internet X.509 Public Key
Infrastructure Certificate and Certificate Revocation List
(CRL) Profile, RFC 5280, DOI 10.17487/RFC5280, May 2008,
[RFC5705]Rescorla, E., Keying Material Exporters for Transport
Layer Security (TLS), RFC 5705, DOI 10.17487/RFC5705,
March 2010,
[RFC5756]Turner, S., Brown, D., Yiu, K., Housley, R., and T. Polk,
Updates for RSAES-OAEP and RSASSA-PSS Algorithm
Parameters, RFC 5756, DOI 10.17487/RFC5756, January 2010,
Rescorla Standards Track[Page 109]
RFC 8446 TLS August 2018
[RFC5869]Krawczyk, H. and P. Eronen, HMAC-based Extract-and-Expand
Key Derivation Function (HKDF), RFC 5869,
DOI 10.17487/RFC5869, May 2010,
[RFC6066]Eastlake 3rd, D., Transport Layer Security (TLS)
Extensions: Extension Definitions, RFC 6066,
DOI 10.17487/RFC6066, January 2011,
[RFC6655]McGrew, D. and D. Bailey, AES-CCM Cipher Suites for
Transport Layer Security (TLS), RFC 6655,
DOI 10.17487/RFC6655, July 2012,
[RFC6960]Santesson, S., Myers, M., Ankney, R., Malpani, A.,
Galperin, S., and C. Adams, X.509 Internet Public Key
Infrastructure Online Certificate Status Protocol OCSP,
RFC 6960, DOI 10.17487/RFC6960, June 2013,
[RFC6961]Pettersen, Y., The Transport Layer Security (TLS)
Multiple Certificate Status Request Extension, RFC 6961,
DOI 10.17487/RFC6961, June 2013,
[RFC6962]Laurie, B., Langley, A., and E. Kasper, Certificate
Transparency, RFC 6962, DOI 10.17487/RFC6962, June 2013,
[RFC6979]Pornin, T., Deterministic Usage of the Digital Signature
Algorithm (DSA) and Elliptic Curve Digital Signature
Algorithm (ECDSA), RFC 6979, DOI 10.17487/RFC6979,
August 2013,
[RFC7301]Friedl, S., Popov, A., Langley, A., and E. Stephan,
Transport Layer Security (TLS) Application-Layer Protocol
Negotiation Extension, RFC 7301, DOI 10.17487/RFC7301,
July 2014,
[RFC7507]Moeller, B. and A. Langley, TLS Fallback Signaling Cipher
Suite Value (SCSV) for Preventing Protocol Downgrade
Attacks, RFC 7507, DOI 10.17487/RFC7507, April 2015,
[RFC7748]Langley, A., Hamburg, M., and S. Turner, Elliptic Curves
for Security, RFC 7748, DOI 10.17487/RFC7748,
January 2016,
Rescorla Standards Track[Page 110]
RFC 8446 TLS August 2018
[RFC7919]Gillmor, D., Negotiated Finite Field Diffie-Hellman
Ephemeral Parameters for Transport Layer Security (TLS),
RFC 7919, DOI 10.17487/RFC7919, August 2016,
[RFC8017]Moriarty, K., Ed., Kaliski, B., Jonsson, J., and A. Rusch,
PKCS #1: RSA Cryptography Specifications Version 2.2,
RFC 8017, DOI 10.17487/RFC8017, November 2016,
[RFC8032]Josefsson, S. and I. Liusvaara, Edwards-Curve Digital
Signature Algorithm (EdDSA), RFC 8032,
DOI 10.17487/RFC8032, January 2017,
[RFC8126]Cotton, M., Leiba, B., and T. Narten, Guidelines for
Writing an IANA Considerations Section in RFCs, BCP 26,
RFC 8126, DOI 10.17487/RFC8126, June 2017,
[RFC8174]Leiba, B., Ambiguity of Uppercase vs Lowercase in
RFC 2119 Key Words, BCP 14, RFC 8174,
DOI 10.17487/RFC8174, May 2017,
[RFC8439]Nir, Y. and A. Langley, ChaCha20 and Poly1305 for IETF
Protocols, RFC 8439, DOI 10.17487/RFC8439, June 2018,
[SHS]
[X690]
Dang, Q., Secure Hash Standard (SHS), National Institute
of Standards and Technology report,
DOI 10.6028/NIST.FIPS.180-4, August 2015.
ITU-T, Information technology ASN.1 encoding rules:
Specification of Basic Encoding Rules (BER), Canonical
Encoding Rules (CER) and Distinguished Encoding Rules
(DER), ISO/IEC 8825-1:2015, November 2015.
Rescorla
Standards Track[Page 111]
RFC 8446 TLS August 2018
12.2.Informative References
[AEAD-LIMITS]
Luykx, A. and K. Paterson, Limits on Authenticated
Encryption Use in TLS, August 2017,
[BBFGKZ16]
[BBK17]
Bhargavan, K., Brzuska, C., Fournet, C., Green, M.,
Kohlweiss, M., and S. Zanella-Beguelin, Downgrade
Resilience in Key-Exchange Protocols, Proceedings of IEEE
Symposium on Security and Privacy (San Jose),
DOI 10.1109/SP.2016.37, May 2016.
Bhargavan, K., Blanchet, B., and N. Kobeissi, Verified
Models and Reference Implementations for the TLS 1.3
Standard Candidate, Proceedings of IEEE Symposium on
Security and Privacy (San Jose), DOI 10.1109/SP.2017.26,
May 2017.
[BDFKPPRSZZ16]
Bhargavan, K., Delignat-Lavaud, A., Fournet, C.,
Kohlweiss, M., Pan, J., Protzenko, J., Rastogi, A., Swamy,
N., Zanella-Beguelin, S., and J. Zinzindohoue,
Implementing and Proving the TLS 1.3 Record Layer,
Proceedings of IEEE Symposium on Security and Privacy (San
Jose), May 2017,
[Ben17a]
[Ben17b]
[Blei98]
Benjamin, D., Presentation before the TLS WG at
IETF 100, November 2017,
Benjamin, D., Additional TLS 1.3 results from Chrome,
message to the TLS mailing list, 18 December 2017,
Bleichenbacher, D., Chosen Ciphertext Attacks against
Protocols Based on RSA Encryption Standard PKCS #1,
Proceedings of CRYPTO 98, 1998.
[BMMRT15]Badertscher, C., Matt, C., Maurer, U., Rogaway, P., and B.
Tackmann, Augmented Secure Channels and the Goal of the
TLS 1.3 Record Layer, ProvSec 2015, September 2015,
Rescorla Standards Track[Page 112]
RFC 8446
TLS August 2018
[BT16]
[CCG16]
Bellare, M. and B. Tackmann, The Multi-User Security of
Authenticated Encryption: AES-GCM in TLS 1.3, Proceedings
of CRYPTO 2016, July 2016,
Cohn-Gordon, K., Cremers, C., and L. Garratt, On
Post-compromise Security, IEEE Computer Security
Foundations Symposium, DOI 10.1109/CSF.2016.19, July 2015.
[CHECKOWAY]
Checkoway, S., Maskiewicz, J., Garman, C., Fried, J.,
Cohney, S., Green, M., Heninger, N., Weinmann, R.,
Rescorla, E., and H. Shacham, A Systematic Analysis of
the Juniper Dual EC Incident, Proceedings of the 2016 ACM
SIGSAC Conference on Computer and Communications Security
CCS 16, DOI 10.1145/2976749.2978395, October 2016.
[CHHSV17]Cremers, C., Horvat, M., Hoyland, J., Scott, S., and T.
van der Merwe, Awkward Handshake: Possible mismatch of
client/server view on client authentication in
post-handshake mode in Revision 18, message to the TLS
mailing list, 10 February 2017,
[CHSV16]
[CK01]
[CLINIC]
[DFGS15]
Rescorla
Cremers, C., Horvat, M., Scott, S., and T. van der Merwe,
Automated Analysis and Verification of TLS 1.3: 0-RTT,
Resumption and Delayed Authentication, Proceedings of
IEEE Symposium on Security and Privacy (San Jose),
DOI 10.1109/SP.2016.35, May 2016,
Canetti, R. and H. Krawczyk, Analysis of Key-Exchange
Protocols and Their Use for Building Secure Channels,
Proceedings of Eurocrypt 2001,
DOI 10.1007/3-540-44987-6_28, April 2001.
Miller, B., Huang, L., Joseph, A., and J. Tygar, I Know
Why You Went to the Clinic: Risks and Realization of HTTPS
Traffic Analysis, Privacy Enhancing Technologies, pp.
143-163, DOI 10.1007/978-3-319-08506-7_8, 2014.
Dowling, B., Fischlin, M., Guenther, F., and D. Stebila,
A Cryptographic Analysis of the TLS 1.3 Handshake
Protocol Candidates, Proceedings of ACM CCS 2015,
October 2015,
Standards Track[Page 113]
RFC 8446
TLS August 2018
[DFGS16]
[DOW92]
[DSS]
[FG17]
[FGSW16]
[FW15]
[HCJC16]
[HGFS15]
[IEEE1363]
Rescorla
Dowling, B., Fischlin, M., Guenther, F., and D. Stebila,
A Cryptographic Analysis of the TLS 1.3 Full and
Pre-shared Key Handshake Protocol, TRON 2016,
February 2016,
Diffie, W., van Oorschot, P., and M. Wiener,
Authentication and authenticated key exchanges, Designs,
Codes and Cryptography, DOI 10.1007/BF00124891, June 1992.
National Institute of Standards and Technology, U.S.
Department of Commerce, Digital Signature Standard
(DSS), NIST FIPS PUB 186-4, DOI 10.6028/NIST.FIPS.186-4,
July 2013.
Fischlin, M. and F. Guenther, Replay Attacks on Zero
Round-Trip Time: The Case of the TLS 1.3 Handshake
Candidates, Proceedings of EuroS&P 2017, April 2017,
Fischlin, M., Guenther, F., Schmidt, B., and B. Warinschi,
Key Confirmation in Key Exchange: A Formal Treatment and
Implications for TLS 1.3, Proceedings of IEEE Symposium
on Security and Privacy (San Jose),
DOI 10.1109/SP.2016.34, May 2016,
Weimer, F., Factoring RSA Keys With TLS Perfect Forward
Secrecy, September 2015.
Husak, M., Cermak, M., Jirsik, T., and P. Celeda, HTTPS
traffic analysis and client identification using passive
SSL/TLS fingerprinting, EURASIP Journal on Information
Security, Vol. 2016, DOI 10.1186/s13635-016-0030-7,
February 2016.
Hlauschek, C., Gruber, M., Fankhauser, F., and C. Schanes,
Prying Open Pandoras Box: KCI Attacks against TLS,
Proceedings of USENIX Workshop on Offensive Technologies,
August 2015.
IEEE, IEEE Standard Specifications for Public Key
Cryptography, IEEE Std. 1363-2000,
DOI 10.1109/IEEESTD.2000.92292.
Standards Track[Page 114]
RFC 8446
TLS August 2018
[JSS15]
Jager, T., Schwenk, J., and J. Somorovsky, On the
Security of TLS 1.3 and QUIC Against Weaknesses in PKCS#1
v1.5 Encryption, Proceedings of ACM CCS 2015,
DOI 10.1145/2810103.2813657, October 2015,
[KEYAGREEMENT]
Barker, E., Chen, L., Roginsky, A., Vassilev, A., and R.
Davis, Recommendation for Pair-Wise Key Establishment
Schemes Using Discrete Logarithm Cryptography, National
Institute of Standards and Technology,
DOI 10.6028/NIST.SP.800-56Ar3, April 2018.
[Kraw10]
[Kraw16]
[KW16]
Krawczyk, H., Cryptographic Extraction and Key
Derivation: The HKDF Scheme, Proceedings of CRYPTO 2010,
August 2010,
Krawczyk, H., A Unilateral-to-Mutual Authentication
Compiler for Key Exchange (with Applications to Client
Authentication in TLS 1.3, Proceedings of ACM CCS 2016,
October 2016,
Krawczyk, H. and H. Wee, The OPTLS Protocol and TLS 1.3,
Proceedings of EuroS&P 2016, March 2016,
[LXZFH16]Li, X., Xu, J., Zhang, Z., Feng, D., and H. Hu, Multiple
Handshakes Security of TLS 1.3 Candidates, Proceedings of
IEEE Symposium on Security and Privacy (San Jose),
DOI 10.1109/SP.2016.36, May 2016,
[Mac17]
[PS18]
MacCarthaigh, C., Security Review of TLS1.3 0-RTT,
March 2017,
Patton, C. and T. Shrimpton, Partially specified
channels: The TLS 1.3 record layer without elision, 2018,
[PSK-FINISHED]
Scott, S., Cremers, C., Horvat, M., and T. van der Merwe,
Revision 10: possible attack if client authentication is
allowed during PSK, message to the TLS mailing list,
31 October 2015,
Rescorla
Standards Track[Page 115]
RFC 8446
TLS August 2018
[REKEY]
[Res17a]
[Res17b]
Abdalla, M. and M. Bellare, Increasing the Lifetime of a
Key: A Comparative Analysis of the Security of Re-keying
Techniques, ASIACRYPT 2000, DOI 10.1007/3-540-44448-3_42,
October 2000.
Rescorla, E., Preliminary data on Firefox TLS 1.3
Middlebox experiment, message to the TLS mailing list,
5 December 2017,
Rescorla, E., More compatibility measurement results,
message to the TLS mailing list, 22 December 2017,
[RFC3552]Rescorla, E. and B. Korver, Guidelines for Writing RFC
Text on Security Considerations, BCP 72, RFC 3552,
DOI 10.17487/RFC3552, July 2003,
[RFC4086]Eastlake 3rd, D., Schiller, J., and S. Crocker,
Randomness Requirements for Security, BCP 106, RFC 4086,
DOI 10.17487/RFC4086, June 2005,
[RFC4346]Dierks, T. and E. Rescorla, The Transport Layer Security
(TLS) Protocol Version 1.1, RFC 4346,
DOI 10.17487/RFC4346, April 2006,
[RFC4366]Blake-Wilson, S., Nystrom, M., Hopwood, D., Mikkelsen, J.,
and T. Wright, Transport Layer Security (TLS)
Extensions, RFC 4366, DOI 10.17487/RFC4366, April 2006,
[RFC4492]Blake-Wilson, S., Bolyard, N., Gupta, V., Hawk, C., and B.
Moeller, Elliptic Curve Cryptography (ECC) Cipher Suites
for Transport Layer Security (TLS), RFC 4492,
DOI 10.17487/RFC4492, May 2006,
[RFC5077]Salowey, J., Zhou, H., Eronen, P., and H. Tschofenig,
Transport Layer Security (TLS) Session Resumption without
Server-Side State, RFC 5077, DOI 10.17487/RFC5077,
January 2008,
Rescorla Standards Track[Page 116]
RFC 8446 TLS August 2018
[RFC5246]Dierks, T. and E. Rescorla, The Transport Layer Security
(TLS) Protocol Version 1.2, RFC 5246,
DOI 10.17487/RFC5246, August 2008,
[RFC5764]McGrew, D. and E. Rescorla, Datagram Transport Layer
Security (DTLS) Extension to Establish Keys for the Secure
Real-time Transport Protocol (SRTP), RFC 5764,
DOI 10.17487/RFC5764, May 2010,
[RFC5929]Altman, J., Williams, N., and L. Zhu, Channel Bindings
for TLS, RFC 5929, DOI 10.17487/RFC5929, July 2010,
[RFC6091]Mavrogiannopoulos, N. and D. Gillmor, Using OpenPGP Keys
for Transport Layer Security (TLS) Authentication,
RFC 6091, DOI 10.17487/RFC6091, February 2011,
[RFC6101]Freier, A., Karlton, P., and P. Kocher, The Secure
Sockets Layer (SSL) Protocol Version 3.0, RFC 6101,
DOI 10.17487/RFC6101, August 2011,
[RFC6176]Turner, S. and T. Polk, Prohibiting Secure Sockets Layer
(SSL) Version 2.0, RFC 6176, DOI 10.17487/RFC6176,
March 2011,
[RFC6347]Rescorla, E. and N. Modadugu, Datagram Transport Layer
Security Version 1.2, RFC 6347, DOI 10.17487/RFC6347,
January 2012,
[RFC6520]Seggelmann, R., Tuexen, M., and M. Williams, Transport
Layer Security (TLS) and Datagram Transport Layer Security
(DTLS) Heartbeat Extension, RFC 6520,
DOI 10.17487/RFC6520, February 2012,
[RFC7230]Fielding, R., Ed. and J. Reschke, Ed., Hypertext Transfer
Protocol (HTTP/1.1): Message Syntax and Routing,
RFC 7230, DOI 10.17487/RFC7230, June 2014,
Rescorla Standards Track[Page 117]
RFC 8446 TLS August 2018
[RFC7250]Wouters, P., Ed., Tschofenig, H., Ed., Gilmore, J.,
Weiler, S., and T. Kivinen, Using Raw Public Keys in
Transport Layer Security (TLS) and Datagram Transport
Layer Security (DTLS), RFC 7250, DOI 10.17487/RFC7250,
June 2014,
[RFC7465]Popov, A., Prohibiting RC4 Cipher Suites, RFC 7465,
DOI 10.17487/RFC7465, February 2015,
[RFC7568]Barnes, R., Thomson, M., Pironti, A., and A. Langley,
Deprecating Secure Sockets Layer Version 3.0, RFC 7568,
DOI 10.17487/RFC7568, June 2015,
[RFC7627]Bhargavan, K., Ed., Delignat-Lavaud, A., Pironti, A.,
Langley, A., and M. Ray, Transport Layer Security (TLS)
Session Hash and Extended Master Secret Extension,
RFC 7627, DOI 10.17487/RFC7627, September 2015,
[RFC7685]Langley, A., A Transport Layer Security (TLS) ClientHello
Padding Extension, RFC 7685, DOI 10.17487/RFC7685,
October 2015,
[RFC7924]Santesson, S. and H. Tschofenig, Transport Layer Security
(TLS) Cached Information Extension, RFC 7924,
DOI 10.17487/RFC7924, July 2016,
[RFC8305]Schinazi, D. and T. Pauly, Happy Eyeballs Version 2:
Better Connectivity Using Concurrency, RFC 8305,
DOI 10.17487/RFC8305, December 2017,
[RFC8422]Nir, Y., Josefsson, S., and M. Pegourie-Gonnard, Elliptic
Curve Cryptography (ECC) Cipher Suites for Transport Layer
Security (TLS) Versions 1.2 and Earlier, RFC 8422,
DOI 10.17487/RFC8422, August 2018,
[RFC8447]Salowey, J. and S. Turner, IANA Registry Updates for TLS
and DTLS, RFC 8447, DOI 10.17487/RFC8447, August 2018,
[RFC8449]Thomson, M., Record Size Limit Extension for TLS,
RFC 8449, DOI 10.17487/RFC8449, August 2018,
Rescorla Standards Track[Page 118]
RFC 8446
TLS August 2018
[RSA]
[SIGMA]
[SLOTH]
[SSL2]
[TIMING]
Rivest, R., Shamir, A., and L. Adleman, A Method for
Obtaining Digital Signatures and Public-Key
Cryptosystems, Communications of the ACM, Vol. 21 No. 2,
pp. 120-126, DOI 10.1145/359340.359342, February 1978.
Krawczyk, H., SIGMA: The SIGn-and-MAc Approach to
Authenticated Diffie-Hellman and its Use in the IKE
Protocols, Proceedings of CRYPTO 2003,
DOI 10.1007/978-3-540-45146-4_24, August 2003.
Bhargavan, K. and G. Leurent, Transcript Collision
Attacks: Breaking Authentication in TLS, IKE, and SSH,
Network and Distributed System Security
Symposium (NDSS 2016), DOI 10.14722/ndss.2016.23418,
February 2016.
Hickman, K., The SSL Protocol, February 1995.
Boneh, D. and D. Brumley, Remote Timing Attacks Are
Practical, USENIX Security Symposium, August 2003.
[TLS13-TRACES]
Thomson, M., Example Handshake Traces for TLS 1.3, Work
in Progress, draft-ietf-tls-tls13-vectors-06, July 2018.
[X501]
ITU-T, Information Technology Open Systems
Interconnection The Directory: Models, ITU-T X.501,
October 2016,
Rescorla
Standards Track[Page 119]
RFC 8446 TLS August 2018
Appendix A.State Machine
This appendix provides a summary of the legal state transitions for
the client and server handshakes.State names (in all capitals,
e.g., START) have no formal meaning but are provided for ease of
comprehension.Actions which are taken only in certain circumstances
are indicated in [].The notation K_{send,recv} = foo means set
the send/recv key to the given key.
A.1. Client
START <—-+ Send ClientHello || Recv HelloRetryRequest[K_send = early data] | | v|/ | |Can | send |early | data ||WAIT_SH —-+ | Recv ServerHello | K_recv = handshake VWAIT_EE | Recv EncryptedExtensions+——–+——–+Using | | Using certificate| PSK | v| || || || || | ||vv| | | | Can sendapp data –>
after here
|WAIT_CV
| | Recv CertificateVerify
+> WAIT_FINISHED <+ | Recv Finished | [Send EndOfEarlyData] | K_send = handshake | [Send Certificate [+ CertificateVerify]] | Send Finished | K_send = K_recv = application vCONNECTEDCertificate|v| WAIT_CERT| | Recv CertificateWAIT_CERT_CRRecv | | Recv CertificateRequest Note that with the transitions as shown above, clients may send alerts that derive from post-ServerHello messages in the clear or with the early data keys.If clients need to send such alerts, they SHOULD first rekey to the handshake keys if possible.Rescorla Standards Track[Page 120]RFC 8446 TLS August 2018A.2. ServerCan sendapp dataafter –>
here
START <—–+ Recv ClientHello | | Send HelloRetryRequestv| RECVD_CH —-+| Select parametersv NEGOTIATED| Send ServerHello| K_send = handshake| Send EncryptedExtensions| [Send CertificateRequest]| [Send Certificate + CertificateVerify]| Send Finished| K_send = application +——–+——–+No 0-RTT | | 0-RTT||K_recv = handshake|[Skip decrypt errors] | | K_recv = early data+——> WAIT_EOED -+
Rescorla
[Page 121]
|| Recv || Recv EndOfEarlyData
|
| ++ | || +> WAIT_FLIGHT2 <——–+| early data || K_recv = handshake |+——–+——–+No auth | | Client auth |||v|||| Certificate || || v+-> WAIT_FINISHED <—+ | Recv Finished | K_recv = application vCONNECTEDStandards TrackRecv | empty || Recv Certificate| Recv| CertificateVerifyWAIT_CERTv WAIT_CVRFC 8446 TLS August 2018Appendix B.Protocol Data Structures and Constant Values This appendix provides the normative protocol types and the definitions for constants.Values listed as “_RESERVED” were used in previous versions of TLS and are listed here for completeness. TLS 1.3 implementations MUST NOT send them but might receive them from older TLS implementations.B.1.Record Layerenum {invalid(0),change_cipher_spec(20),alert(21),handshake(22),application_data(23),heartbeat(24),/* RFC 6520 */(255)} ContentType;struct {ContentType type;ProtocolVersion legacy_record_version;uint16 length;opaque fragment[TLSPlaintext.length];} TLSPlaintext;struct {opaque content[TLSPlaintext.length];ContentType type;uint8 zeros[length_of_padding];} TLSInnerPlaintext;struct {ContentType opaque_type = application_data; /* 23 */ProtocolVersion legacy_record_version = 0x0303; /* TLS v1.2 */uint16 length;opaque encrypted_record[TLSCiphertext.length];} TLSCiphertext;Rescorla Standards Track[Page 122]RFC 8446 TLSAugust 2018B.2.Alert Messagesenum { warning(1), fatal(2), (255) } AlertLevel;enum {close_notify(0),unexpected_message(10),bad_record_mac(20),decryption_failed_RESERVED(21),record_overflow(22),decompression_failure_RESERVED(30),handshake_failure(40),no_certificate_RESERVED(41),bad_certificate(42),unsupported_certificate(43),certificate_revoked(44),certificate_expired(45),certificate_unknown(46),illegal_parameter(47),unknown_ca(48),access_denied(49),decode_error(50),decrypt_error(51),export_restriction_RESERVED(60),protocol_version(70),insufficient_security(71),internal_error(80),inappropriate_fallback(86),user_canceled(90),no_renegotiation_RESERVED(100),missing_extension(109),unsupported_extension(110),certificate_unobtainable_RESERVED(111),unrecognized_name(112),bad_certificate_status_response(113),bad_certificate_hash_value_RESERVED(114),unknown_psk_identity(115),certificate_required(116),no_application_protocol(120),(255)} AlertDescription;struct {AlertLevel level;AlertDescription description;} Alert;Rescorla Standards Track[Page 123]RFC 8446 TLS August 2018B.3.Handshake Protocolenum {hello_request_RESERVED(0),client_hello(1),server_hello(2),hello_verify_request_RESERVED(3),new_session_ticket(4),end_of_early_data(5),hello_retry_request_RESERVED(6),encrypted_extensions(8),certificate(11),server_key_exchange_RESERVED(12),certificate_request(13),server_hello_done_RESERVED(14),certificate_verify(15),client_key_exchange_RESERVED(16),finished(20),certificate_url_RESERVED(21),certificate_status_RESERVED(22),supplemental_data_RESERVED(23),key_update(24),message_hash(254),(255)} HandshakeType;struct {HandshakeType msg_type;uint24 length;select (Handshake.msg_type) {/* handshake type *//* bytes in message */case client_hello:case server_hello:case end_of_early_data:case encrypted_extensions:EncryptedExtensions;case certificate_request:case certificate:case certificate_verify:case finished:case new_session_ticket:case key_update:};} Handshake;CertificateRequest;Certificate;CertificateVerify;Finished;NewSessionTicket;KeyUpdate;Rescorla Standards Track[Page 124]ClientHello;ServerHello;EndOfEarlyData;RFC 8446 TLS August 2018B.3.1.Key Exchange Messagesuint16 ProtocolVersion;opaque Random[32];uint8 CipherSuite[2];/* Cryptographic suite selector */struct {ProtocolVersion legacy_version = 0x0303;/* TLS v1.2 */Random random;opaque legacy_session_id<0..32>;
CipherSuite cipher_suites<2..2^16-2>;
opaque legacy_compression_methods<1..2^8-1>;
Extension extensions<8..2^16-1>;
} ClientHello;
struct {
ProtocolVersion legacy_version = 0x0303;
Random random;
opaque legacy_session_id_echo<0..32>;
CipherSuite cipher_suite;
uint8 legacy_compression_method = 0;
Extension extensions<6..2^16-1>;
} ServerHello;
/* TLS v1.2 */
Rescorla Standards Track
[Page 125]
RFC 8446 TLS
August 2018
struct {
ExtensionType extension_type;
opaque extension_data<0..2^16-1>;
} Extension;
enum {
server_name(0),
max_fragment_length(1),
status_request(5),
supported_groups(10),
signature_algorithms(13),
use_srtp(14),
heartbeat(15),
application_layer_protocol_negotiation(16), /* RFC 7301 */
signed_certificate_timestamp(18),
client_certificate_type(19),
server_certificate_type(20),
padding(21),
RESERVED(40),
pre_shared_key(41),
early_data(42),
supported_versions(43),
cookie(44),
psk_key_exchange_modes(45),
RESERVED(46),
certificate_authorities(47),
oid_filters(48),
post_handshake_auth(49),
signature_algorithms_cert(50),
key_share(51),
(65535)
} ExtensionType;
struct {
NamedGroup group;
opaque key_exchange<1..2^16-1>;
} KeyShareEntry;
struct {
KeyShareEntry client_shares<0..2^16-1>;
} KeyShareClientHello;
struct {
NamedGroup selected_group;
} KeyShareHelloRetryRequest;
Rescorla Standards Track
/* RFC 6962 */
/* RFC 7250 */
/* RFC 7250 */
/* RFC 7685 */
/* Used but never
assigned */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
/* Used but never
assigned */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 8446 */
/* RFC 6066 */
/* RFC 6066 */
/* RFC 6066 */
/* RFC 8422, 7919 */
/* RFC 8446 */
/* RFC 5764 */
/* RFC 6520 */
[Page 126]
RFC 8446 TLS August 2018
struct {
KeyShareEntry server_share;
} KeyShareServerHello;
struct {
uint8 legacy_form = 4;
opaque X[coordinate_length];
opaque Y[coordinate_length];
} UncompressedPointRepresentation;
enum { psk_ke(0), psk_dhe_ke(1), (255) } PskKeyExchangeMode;
struct {
PskKeyExchangeMode ke_modes<1..255>;
} PskKeyExchangeModes;
struct {} Empty;
struct {
select (Handshake.msg_type) {
case new_session_ticket:
case client_hello:
case encrypted_extensions: Empty;
};
} EarlyDataIndication;
struct {
opaque identity<1..2^16-1>;
uint32 obfuscated_ticket_age;
} PskIdentity;
opaque PskBinderEntry<32..255>;
struct {
PskIdentity identities<7..2^16-1>;
PskBinderEntry binders<33..2^16-1>;
} OfferedPsks;
struct {
select (Handshake.msg_type) {
case client_hello: OfferedPsks;
case server_hello: uint16 selected_identity;
};
} PreSharedKeyExtension;
Rescorla Standards Track[Page 127]
uint32 max_early_data_size;
Empty;
RFC 8446 TLS
August 2018
B.3.1.1.Version Extension
struct {
select (Handshake.msg_type) {
case client_hello:
ProtocolVersion versions<2..254>;
case server_hello: /* and HelloRetryRequest */
ProtocolVersion selected_version;
};
} SupportedVersions;
B.3.1.2.Cookie Extension
struct {
opaque cookie<1..2^16-1>;
} Cookie;
Rescorla Standards Track
[Page 128]
RFC 8446 TLS August 2018
B.3.1.3.Signature Algorithm Extension
enum {
/* RSASSA-PKCS1-v1_5 algorithms */
rsa_pkcs1_sha256(0x0401),
rsa_pkcs1_sha384(0x0501),
rsa_pkcs1_sha512(0x0601),
/* ECDSA algorithms */
ecdsa_secp256r1_sha256(0x0403),
ecdsa_secp384r1_sha384(0x0503),
ecdsa_secp521r1_sha512(0x0603),
/* RSASSA-PSS algorithms with public key OID rsaEncryption */
rsa_pss_rsae_sha256(0x0804),
rsa_pss_rsae_sha384(0x0805),
rsa_pss_rsae_sha512(0x0806),
/* EdDSA algorithms */
ed25519(0x0807),
ed448(0x0808),
/* RSASSA-PSS algorithms with public key OID RSASSA-PSS */
rsa_pss_pss_sha256(0x0809),
rsa_pss_pss_sha384(0x080a),
rsa_pss_pss_sha512(0x080b),
/* Legacy algorithms */
rsa_pkcs1_sha1(0x0201),
ecdsa_sha1(0x0203),
/* Reserved Code Points */
obsolete_RESERVED(0x0000..0x0200),
dsa_sha1_RESERVED(0x0202),
obsolete_RESERVED(0x0204..0x0400),
dsa_sha256_RESERVED(0x0402),
obsolete_RESERVED(0x0404..0x0500),
dsa_sha384_RESERVED(0x0502),
obsolete_RESERVED(0x0504..0x0600),
dsa_sha512_RESERVED(0x0602),
obsolete_RESERVED(0x0604..0x06FF),
private_use(0xFE00..0xFFFF),
(0xFFFF)
} SignatureScheme;
struct {
SignatureScheme supported_signature_algorithms<2..2^16-2>;
} SignatureSchemeList;
Rescorla Standards Track[Page 129]
RFC 8446 TLS August 2018
B.3.1.4.Supported Groups Extension
enum {
unallocated_RESERVED(0x0000),
/* Elliptic Curve Groups (ECDHE) */
obsolete_RESERVED(0x0001..0x0016),
secp256r1(0x0017), secp384r1(0x0018), secp521r1(0x0019),
obsolete_RESERVED(0x001A..0x001C),
x25519(0x001D), x448(0x001E),
/* Finite Field Groups (DHE) */
ffdhe2048(0x0100), ffdhe3072(0x0101), ffdhe4096(0x0102),
ffdhe6144(0x0103), ffdhe8192(0x0104),
/* Reserved Code Points */
ffdhe_private_use(0x01FC..0x01FF),
ecdhe_private_use(0xFE00..0xFEFF),
obsolete_RESERVED(0xFF01..0xFF02),
(0xFFFF)
} NamedGroup;
struct {
NamedGroup named_group_list<2..2^16-1>;
} NamedGroupList;
Values within obsolete_RESERVED ranges are used in previous
versions of TLS and MUST NOT be offered or negotiated by TLS 1.3
implementations.The obsolete curves have various known/theoretical
weaknesses or have had very little usage, in some cases only due to
unintentional server configuration issues.They are no longer
considered appropriate for general use and should be assumed to be
potentially unsafe.The set of curves specified here is sufficient
for interoperability with all currently deployed and properly
configured TLS implementations.
Rescorla Standards Track[Page 130]
RFC 8446 TLS
August 2018
B.3.2.Server Parameters Messages
opaque DistinguishedName<1..2^16-1>;
struct {
DistinguishedName authorities<3..2^16-1>;
} CertificateAuthoritiesExtension;
struct {
opaque certificate_extension_oid<1..2^8-1>;
opaque certificate_extension_values<0..2^16-1>;
} OIDFilter;
struct {
OIDFilter filters<0..2^16-1>;
} OIDFilterExtension;
struct {} PostHandshakeAuth;
struct {
Extension extensions<0..2^16-1>;
} EncryptedExtensions;
struct {
opaque certificate_request_context<0..2^8-1>;
Extension extensions<2..2^16-1>;
} CertificateRequest;
Rescorla Standards Track
[Page 131]
RFC 8446 TLS
August 2018
B.3.3.Authentication Messages
enum {
X509(0),
OpenPGP_RESERVED(1),
RawPublicKey(2),
(255)
} CertificateType;
struct {
select (certificate_type) {
case RawPublicKey:
/* From RFC 7250 ASN.1_subjectPublicKeyInfo */
opaque ASN1_subjectPublicKeyInfo<1..2^24-1>;
case X509:
opaque cert_data<1..2^24-1>;
};
Extension extensions<0..2^16-1>;
} CertificateEntry;
struct {
opaque certificate_request_context<0..2^8-1>;
CertificateEntry certificate_list<0..2^24-1>;
} Certificate;
struct {
SignatureScheme algorithm;
opaque signature<0..2^16-1>;
} CertificateVerify;
struct {
opaque verify_data[Hash.length];
} Finished;
B.3.4.Ticket Establishment
struct {
uint32 ticket_lifetime;
uint32 ticket_age_add;
opaque ticket_nonce<0..255>;
opaque ticket<1..2^16-1>;
Extension extensions<0..2^16-2>;
} NewSessionTicket;
Rescorla Standards Track[Page 132]
RFC 8446 TLS August 2018
B.3.5.Updating Keys
struct {} EndOfEarlyData;
enum {
update_not_requested(0), update_requested(1), (255)
} KeyUpdateRequest;
struct {
KeyUpdateRequest request_update;
} KeyUpdate;
B.4.Cipher Suites
A symmetric cipher suite defines the pair of the AEAD algorithm and
hash algorithm to be used with HKDF.Cipher suite names follow the
naming convention:
CipherSuite TLS_AEAD_HASH = VALUE;
+++ | Component | Contents | +++ | TLS | The string TLS | ||| | AEAD | The AEAD algorithm used for record protection | ||| | HASH | The hash algorithm used with HKDF | ||| | VALUE | The two-byte ID assigned for this cipher suite | +++
This specification defines the following cipher suites for use with
TLS 1.3.
Rescorla
++-+ | Description | Value | ++-+ | TLS_AES_128_GCM_SHA256 | {0x13,0x01} | ||| | TLS_AES_256_GCM_SHA384 | {0x13,0x02} | ||| | TLS_CHACHA20_POLY1305_SHA256 | {0x13,0x03} | ||| | TLS_AES_128_CCM_SHA256 | {0x13,0x04} | ||| | TLS_AES_128_CCM_8_SHA256 | {0x13,0x05} | ++-+
Standards Track
[Page 133]
RFC 8446 TLS August 2018
The corresponding AEAD algorithms AEAD_AES_128_GCM, AEAD_AES_256_GCM,
and AEAD_AES_128_CCM are defined in [RFC5116].
AEAD_CHACHA20_POLY1305 is defined in [RFC8439].AEAD_AES_128_CCM_8
is defined in [RFC6655].The corresponding hash algorithms are
defined in [SHS].
Although TLS 1.3 uses the same cipher suite space as previous
versions of TLS, TLS 1.3 cipher suites are defined differently, only
specifying the symmetric ciphers, and cannot be used for TLS 1.2.
Similarly, cipher suites for TLS 1.2 and lower cannot be used with
TLS 1.3.
New cipher suite values are assigned by IANA as described in
Section 11.
Appendix C.Implementation Notes
The TLS protocol cannot prevent many common security mistakes.This
appendix provides several recommendations to assist implementors.
[TLS13-TRACES] provides test vectors for TLS 1.3 handshakes.
C.1.Random Number Generation and Seeding
TLS requires a cryptographically secure pseudorandom number generator
(CSPRNG).In most cases, the operating system provides an
appropriate facility such as /dev/urandom, which should be used
absent other (e.g., performance) concerns.It is RECOMMENDED to use
an existing CSPRNG implementation in preference to crafting a new
one.Many adequate cryptographic libraries are already available
under favorable license terms.Should those prove unsatisfactory,
[RFC4086] provides guidance on the generation of random values.
TLS uses random values (1) in public protocol fields such as the
public Random values in the ClientHello and ServerHello and (2) to
generate keying material.With a properly functioning CSPRNG, this
does not present a security problem, as it is not feasible to
determine the CSPRNG state from its output.However, with a broken
CSPRNG, it may be possible for an attacker to use the public output
to determine the CSPRNG internal state and thereby predict the keying
material, as documented in [CHECKOWAY].Implementations can provide
extra security against this form of attack by using separate CSPRNGs
to generate public and private values.
Rescorla Standards Track[Page 134]
RFC 8446 TLS August 2018
C.2.Certificates and Authentication
Implementations are responsible for verifying the integrity of
certificates and should generally support certificate revocation
messages.Absent a specific indication from an application profile,
certificates should always be verified to ensure proper signing by a
trusted certificate authority (CA).The selection and addition of
trust anchors should be done very carefully.Users should be able to
view information about the certificate and trust anchor.
Applications SHOULD also enforce minimum and maximum key sizes.For
example, certification paths containing keys or signatures weaker
than 2048-bit RSA or 224-bit ECDSA are not appropriate for secure
applications.
C.3.Implementation Pitfalls
Implementation experience has shown that certain parts of earlier TLS
specifications are not easy to understand and have been a source of
interoperability and security problems.Many of these areas have
been clarified in this document, but this appendix contains a short
list of the most important things that require special attention from
implementors.
TLS protocol issues:
Do you correctly handle handshake messages that are fragmented to
multiple TLS records (see Section 5.1)?Do you correctly handle
corner cases like a ClientHello that is split into several small
fragments?Do you fragment handshake messages that exceed the
maximum fragment size?In particular, the Certificate and
CertificateRequest handshake messages can be large enough to
require fragmentation.
Do you ignore the TLS record layer version number in all
unencrypted TLS records (see Appendix D)?
Have you ensured that all support for SSL, RC4, EXPORT ciphers,
and MD5 (via the signature_algorithms extension) is completely
removed from all possible configurations that support TLS 1.3 or
later, and that attempts to use these obsolete capabilities fail
correctly (see Appendix D)?
Do you handle TLS extensions in ClientHellos correctly, including
unknown extensions?
Rescorla Standards Track[Page 135]
RFC 8446 TLS August 2018
When the server has requested a client certificate but no suitable
certificate is available, do you correctly send an empty
Certificate message, instead of omitting the whole message (see
Section 4.4.2)?
When processing the plaintext fragment produced by AEAD-Decrypt
and scanning from the end for the ContentType, do you avoid
scanning past the start of the cleartext in the event that the
peer has sent a malformed plaintext of all zeros?
Do you properly ignore unrecognized cipher suites (Section 4.1.2),
hello extensions (Section 4.2), named groups (Section 4.2.7), key
shares (Section 4.2.8), supported versions (Section 4.2.1), and
signature algorithms (Section 4.2.3) in the ClientHello?
As a server, do you send a HelloRetryRequest to clients which
support a compatible (EC)DHE group but do not predict it in the
key_share extension?As a client, do you correctly handle a
HelloRetryRequest from the server?
Cryptographic details:
What countermeasures do you use to prevent timing attacks
[TIMING]?
When using Diffie-Hellman key exchange, do you correctly preserve
leading zero bytes in the negotiated key (see Section 7.4.1)?
Does your TLS client check that the Diffie-Hellman parameters sent
by the server are acceptable (see Section 4.2.8.1)?
Do you use a strong and, most importantly, properly seeded random
number generator (see Appendix C.1) when generating Diffie-Hellman
private values, the ECDSA k parameter, and other security-
critical values?It is RECOMMENDED that implementations implement
deterministic ECDSA as specified in [RFC6979].
Do you zero-pad Diffie-Hellman public key values and shared
secrets to the group size (see Section 4.2.8.1 and Section 7.4.1)?
Do you verify signatures after making them, to protect against
RSA-CRT key leaks [FW15]?
Rescorla Standards Track[Page 136]
RFC 8446 TLS August 2018
C.4.Client Tracking Prevention
Clients SHOULD NOT reuse a ticket for multiple connections.Reuse of
a ticket allows passive observers to correlate different connections.
Servers that issue tickets SHOULD offer at least as many tickets as
the number of connections that a client might use; for example, a web
browser using HTTP/1.1 [RFC7230] might open six connections to a
server.Servers SHOULD issue new tickets with every connection.
This ensures that clients are always able to use a new ticket when
creating a new connection.
C.5.Unauthenticated Operation
Previous versions of TLS offered explicitly unauthenticated cipher
suites based on anonymous Diffie-Hellman.These modes have been
deprecated in TLS 1.3.However, it is still possible to negotiate
parameters that do not provide verifiable server authentication by
several methods, including:
Raw public keys [RFC7250].
Using a public key contained in a certificate but without
validation of the certificate chain or any of its contents.
Either technique used alone is vulnerable to man-in-the-middle
attacks and therefore unsafe for general use.However, it is also
possible to bind such connections to an external authentication
mechanism via out-of-band validation of the servers public key,
trust on first use, or a mechanism such as channel bindings (though
the channel bindings described in [RFC5929] are not defined for
TLS 1.3).If no such mechanism is used, then the connection has no
protection against active man-in-the-middle attack; applications
MUST NOT use TLS in such a way absent explicit configuration or a
specific application profile.
Rescorla Standards Track[Page 137]
RFC 8446 TLS August 2018
Appendix D.Backward Compatibility
The TLS protocol provides a built-in mechanism for version
negotiation between endpoints potentially supporting different
versions of TLS.
TLS 1.x and SSL 3.0 use compatible ClientHello messages.Servers can
also handle clients trying to use future versions of TLS as long as
the ClientHello format remains compatible and there is at least one
protocol version supported by both the client and the server.
Prior versions of TLS used the record layer version number
(TLSPlaintext.legacy_record_version and
TLSCiphertext.legacy_record_version) for various purposes.As of
TLS 1.3, this field is deprecated.The value of
TLSPlaintext.legacy_record_version MUST be ignored by all
implementations.The value of TLSCiphertext.legacy_record_version is
included in the additional data for deprotection but MAY otherwise be
ignored or MAY be validated to match the fixed constant value.
Version negotiation is performed using only the handshake versions
(ClientHello.legacy_version and ServerHello.legacy_version, as well
as the ClientHello, HelloRetryRequest, and ServerHello
supported_versions extensions).In order to maximize
interoperability with older endpoints, implementations that negotiate
the use of TLS 1.0-1.2 SHOULD set the record layer version number to
the negotiated version for the ServerHello and all records
thereafter.
For maximum compatibility with previously non-standard behavior and
misconfigured deployments, all implementations SHOULD support
validation of certification paths based on the expectations in this
document, even when handling prior TLS versions handshakes (see
Section 4.4.2.2).
TLS 1.2 and prior supported an Extended Master Secret [RFC7627]
extension which digested large parts of the handshake transcript into
the master secret.Because TLS 1.3 always hashes in the transcript
up to the server Finished, implementations which support both TLS 1.3
and earlier versions SHOULD indicate the use of the Extended Master
Secret extension in their APIs whenever TLS 1.3 is used.
Rescorla Standards Track[Page 138]
RFC 8446 TLS August 2018
D.1.Negotiating with an Older Server
A TLS 1.3 client who wishes to negotiate with servers that do not
support TLS 1.3 will send a normal TLS 1.3 ClientHello containing
0x0303 (TLS 1.2) in ClientHello.legacy_version but with the correct
version(s) in the supported_versions extension.If the server does
not support TLS 1.3, it will respond with a ServerHello containing an
older version number.If the client agrees to use this version, the
negotiation will proceed as appropriate for the negotiated protocol.
A client using a ticket for resumption SHOULD initiate the connection
using the version that was previously negotiated.
Note that 0-RTT data is not compatible with older servers and
SHOULD NOT be sent absent knowledge that the server supports TLS 1.3.
See Appendix D.3.
If the version chosen by the server is not supported by the client
(or is not acceptable), the client MUST abort the handshake with a
protocol_version alert.
Some legacy server implementations are known to not implement the TLS
specification properly and might abort connections upon encountering
TLS extensions or versions which they are not aware of.
Interoperability with buggy servers is a complex topic beyond the
scope of this document.Multiple connection attempts may be required
in order to negotiate a backward-compatible connection; however, this
practice is vulnerable to downgrade attacks and is NOT RECOMMENDED.
D.2.Negotiating with an Older Client
A TLS server can also receive a ClientHello indicating a version
number smaller than its highest supported version.If the
supported_versions extension is present, the server MUST negotiate
using that extension as described in Section 4.2.1.If the
supported_versions extension is not present, the server MUST
negotiate the minimum of ClientHello.legacy_version and TLS 1.2.For
example, if the server supports TLS 1.0, 1.1, and 1.2, and
legacy_version is TLS 1.0, the server will proceed with a TLS 1.0
ServerHello.If the supported_versions extension is absent and the
server only supports versions greater than
ClientHello.legacy_version, the server MUST abort the handshake with
a protocol_version alert.
Note that earlier versions of TLS did not clearly specify the record
layer version number value in all cases
(TLSPlaintext.legacy_record_version).Servers will receive various
TLS 1.x versions in this field, but its value MUST always be ignored.
Rescorla Standards Track[Page 139]
RFC 8446 TLS August 2018
D.3.0-RTT Backward Compatibility
0-RTT data is not compatible with older servers.An older server
will respond to the ClientHello with an older ServerHello, but it
will not correctly skip the 0-RTT data and will fail to complete the
handshake.This can cause issues when a client attempts to use
0-RTT, particularly against multi-server deployments.For example, a
deployment could deploy TLS 1.3 gradually with some servers
implementing TLS 1.3 and some implementing TLS 1.2, or a TLS 1.3
deployment could be downgraded to TLS 1.2.
A client that attempts to send 0-RTT data MUST fail a connection if
it receives a ServerHello with TLS 1.2 or older.It can then retry
the connection with 0-RTT disabled.To avoid a downgrade attack, the
client SHOULD NOT disable TLS 1.3, only 0-RTT.
To avoid this error condition, multi-server deployments SHOULD ensure
a uniform and stable deployment of TLS 1.3 without 0-RTT prior to
enabling 0-RTT.
D.4.Middlebox Compatibility Mode
Field measurements [Ben17a] [Ben17b] [Res17a] [Res17b] have found
that a significant number of middleboxes misbehave when a TLS
client/server pair negotiates TLS 1.3.Implementations can increase
the chance of making connections through those middleboxes by making
the TLS 1.3 handshake look more like a TLS 1.2 handshake:
The client always provides a non-empty session ID in the
ClientHello, as described in the legacy_session_id section of
Section 4.1.2.
If not offering early data, the client sends a dummy
change_cipher_spec record (see the third paragraph of Section 5)
immediately before its second flight.This may either be before
its second ClientHello or before its encrypted handshake flight.
If offering early data, the record is placed immediately after the
first ClientHello.
The server sends a dummy change_cipher_spec record immediately
after its first handshake message.This may either be after a
ServerHello or a HelloRetryRequest.
When put together, these changes make the TLS 1.3 handshake resemble
TLS 1.2 session resumption, which improves the chance of successfully
connecting through middleboxes.This compatibility mode is
partially negotiated: the client can opt to provide a session ID or
not, and the server has to echo it.Either side can send
Rescorla Standards Track[Page 140]
RFC 8446 TLS August 2018
change_cipher_spec at any time during the handshake, as they must be
ignored by the peer, but if the client sends a non-empty session ID,
the server MUST send the change_cipher_spec as described in this
appendix.
D.5.Security Restrictions Related to Backward Compatibility
Implementations negotiating the use of older versions of TLS SHOULD
prefer forward secret and AEAD cipher suites, when available.
The security of RC4 cipher suites is considered insufficient for the
reasons cited in [RFC7465].Implementations MUST NOT offer or
negotiate RC4 cipher suites for any version of TLS for any reason.
Old versions of TLS permitted the use of very low strength ciphers.
Ciphers with a strength less than 112 bits MUST NOT be offered or
negotiated for any version of TLS for any reason.
The security of SSL 3.0 [RFC6101] is considered insufficient for the
reasons enumerated in [RFC7568], and it MUST NOT be negotiated for
any reason.
The security of SSL 2.0 [SSL2] is considered insufficient for the
reasons enumerated in [RFC6176], and it MUST NOT be negotiated for
any reason.
Implementations MUST NOT send an SSL version 2.0 compatible
CLIENT-HELLO.Implementations MUST NOT negotiate TLS 1.3 or later
using an SSL version 2.0 compatible CLIENT-HELLO.Implementations
are NOT RECOMMENDED to accept an SSL version 2.0 compatible
CLIENT-HELLO in order to negotiate older versions of TLS.
Implementations MUST NOT send a ClientHello.legacy_version or
ServerHello.legacy_version set to 0x0300 or less.Any endpoint
receiving a Hello message with ClientHello.legacy_version or
ServerHello.legacy_version set to 0x0300 MUST abort the handshake
with a protocol_version alert.
Implementations MUST NOT send any records with a version less than
0x0300.Implementations SHOULD NOT accept any records with a version
less than 0x0300 (but may inadvertently do so if the record version
number is ignored completely).
Implementations MUST NOT use the Truncated HMAC extension, defined in
Section 7 of [RFC6066], as it is not applicable to AEAD algorithms
and has been shown to be insecure in some scenarios.
Rescorla Standards Track[Page 141]
RFC 8446 TLS August 2018
Appendix E.Overview of Security Properties
A complete security analysis of TLS is outside the scope of this
document.In this appendix, we provide an informal description of
the desired properties as well as references to more detailed work in
the research literature which provides more formal definitions.
We cover properties of the handshake separately from those of the
record layer.
E.1.Handshake
The TLS handshake is an Authenticated Key Exchange (AKE) protocol
which is intended to provide both one-way authenticated (server-only)
and mutually authenticated (client and server) functionality.At the
completion of the handshake, each side outputs its view of the
following values:
A set of session keys (the various secrets derived from the
master secret) from which can be derived a set of working keys.
A set of cryptographic parameters (algorithms, etc.).
The identities of the communicating parties.
We assume the attacker to be an active network attacker, which means
it has complete control over the network used to communicate between
the parties [RFC3552].Even under these conditions, the handshake
should provide the properties listed below.Note that these
properties are not necessarily independent, but reflect the protocol
consumers needs.
Establishing the same session keys:The handshake needs to output
the same set of session keys on both sides of the handshake,
provided that it completes successfully on each endpoint (see
[CK01], Definition 1, part 1).
Secrecy of the session keys:The shared session keys should be known
only to the communicating parties and not to the attacker (see
[CK01], Definition 1, part 2).Note that in a unilaterally
authenticated connection, the attacker can establish its own
session keys with the server, but those session keys are distinct
from those established by the client.
Peer authentication:The clients view of the peer identity should
reflect the servers identity.If the client is authenticated,
the servers view of the peer identity should match the clients
identity.
Rescorla Standards Track[Page 142]
RFC 8446 TLS August 2018
Uniqueness of the session keys:Any two distinct handshakes should
produce distinct, unrelated session keys.Individual session keys
produced by a handshake should also be distinct and independent.
Downgrade protection:The cryptographic parameters should be the
same on both sides and should be the same as if the peers had been
communicating in the absence of an attack (see [BBFGKZ16],
Definitions 8 and 9).
Forward secret with respect to long-term keys:If the long-term
keying material (in this case the signature keys in certificate-
based authentication modes or the external/resumption PSK in PSK
with (EC)DHE modes) is compromised after the handshake is
complete, this does not compromise the security of the session key
(see [DOW92]), as long as the session key itself has been erased.
The forward secrecy property is not satisfied when PSK is used in
the psk_ke PskKeyExchangeMode.
Key Compromise Impersonation (KCI) resistance:In a mutually
authenticated connection with certificates, compromising the
long-term secret of one actor should not break that actors
authentication of their peer in the given connection (see
[HGFS15]).For example, if a clients signature key is
compromised, it should not be possible to impersonate arbitrary
servers to that client in subsequent handshakes.
Protection of endpoint identities:The servers identity
(certificate) should be protected against passive attackers.The
clients identity should be protected against both passive and
active attackers.
Informally, the signature-based modes of TLS 1.3 provide for the
establishment of a unique, secret, shared key established by an
(EC)DHE key exchange and authenticated by the servers signature over
the handshake transcript, as well as tied to the servers identity by
a MAC.If the client is authenticated by a certificate, it also
signs over the handshake transcript and provides a MAC tied to both
identities.[SIGMA] describes the design and analysis of this type
of key exchange protocol.If fresh (EC)DHE keys are used for each
connection, then the output keys are forward secret.
The external PSK and resumption PSK bootstrap from a long-term shared
secret into a unique per-connection set of short-term session keys.
This secret may have been established in a previous handshake.If
PSK with (EC)DHE key establishment is used, these session keys will
also be forward secret.The resumption PSK has been designed so that
the resumption master secret computed by connection N and needed to
form connection N+1 is separate from the traffic keys used by
Rescorla Standards Track[Page 143]
RFC 8446 TLS August 2018
connection N, thus providing forward secrecy between the connections.
In addition, if multiple tickets are established on the same
connection, they are associated with different keys, so compromise of
the PSK associated with one ticket does not lead to the compromise of
connections established with PSKs associated with other tickets.
This property is most interesting if tickets are stored in a database
(and so can be deleted) rather than if they are self-encrypted.
The PSK binder value forms a binding between a PSK and the current
handshake, as well as between the session where the PSK was
established and the current session.This binding transitively
includes the original handshake transcript, because that transcript
is digested into the values which produce the resumption master
secret.This requires that both the KDF used to produce the
resumption master secret and the MAC used to compute the binder be
collision resistant.See Appendix E.1.1 for more on this.Note: The
binder does not cover the binder values from other PSKs, though they
are included in the Finished MAC.
TLS does not currently permit the server to send a
certificate_request message in non-certificate-based handshakes
(e.g., PSK).If this restriction were to be relaxed in future, the
clients signature would not cover the servers certificate directly.
However, if the PSK was established through a NewSessionTicket, the
clients signature would transitively cover the servers certificate
through the PSK binder.[PSK-FINISHED] describes a concrete attack
on constructions that do not bind to the servers certificate (see
also [Kraw16]).It is unsafe to use certificate-based client
authentication when the client might potentially share the same
PSK/key-id pair with two different endpoints.Implementations
MUST NOT combine external PSKs with certificate-based authentication
of either the client or the server unless negotiated by some
extension.
If an exporter is used, then it produces values which are unique and
secret (because they are generated from a unique session key).
Exporters computed with different labels and contexts are
computationally independent, so it is not feasible to compute one
from another or the session secret from the exported value.
Note: Exporters can produce arbitrary-length values; if exporters are
to be used as channel bindings, the exported value MUST be large
enough to provide collision resistance.The exporters provided in
TLS 1.3 are derived from the same Handshake Contexts as the early
traffic keys and the application traffic keys, respectively, and thus
have similar security properties.Note that they do not include the
clients certificate; future applications which wish to bind to the
clients certificate may need to define a new exporter that includes
the full handshake transcript.
Rescorla Standards Track[Page 144]
RFC 8446 TLS August 2018
For all handshake modes, the Finished MAC (and, where present, the
signature) prevents downgrade attacks.In addition, the use of
certain bytes in the random nonces as described in Section 4.1.3
allows the detection of downgrade to previous TLS versions.See
[BBFGKZ16] for more details on TLS 1.3 and downgrade.
As soon as the client and the server have exchanged enough
information to establish shared keys, the remainder of the handshake
is encrypted, thus providing protection against passive attackers,
even if the computed shared key is not authenticated.Because the
server authenticates before the client, the client can ensure that if
it authenticates to the server, it only reveals its identity to an
authenticated server.Note that implementations must use the
provided record-padding mechanism during the handshake to avoid
leaking information about the identities due to length.The clients
proposed PSK identities are not encrypted, nor is the one that the
server selects.
E.1.1.Key Derivation and HKDF
Key derivation in TLS 1.3 uses HKDF as defined in [RFC5869] and its
two components, HKDF-Extract and HKDF-Expand.The full rationale for
the HKDF construction can be found in [Kraw10] and the rationale for
the way it is used in TLS 1.3 in [KW16].Throughout this document,
each application of HKDF-Extract is followed by one or more
invocations of HKDF-Expand.This ordering should always be followed
(including in future revisions of this document); in particular, one
SHOULD NOT use an output of HKDF-Extract as an input to another
application of HKDF-Extract without an HKDF-Expand in between.
Multiple applications of HKDF-Expand to some of the same inputs are
allowed as long as these are differentiated via the key and/or the
labels.
Note that HKDF-Expand implements a pseudorandom function (PRF) with
both inputs and outputs of variable length.In some of the uses of
HKDF in this document (e.g., for generating exporters and the
resumption_master_secret), it is necessary that the application of
HKDF-Expand be collision resistant; namely, it should be infeasible
to find two different inputs to HKDF-Expand that output the same
value.This requires the underlying hash function to be collision
resistant and the output length from HKDF-Expand to be of size at
least 256 bits (or as much as needed for the hash function to prevent
finding collisions).
Rescorla Standards Track[Page 145]
RFC 8446 TLS August 2018
E.1.2.Client Authentication
A client that has sent authentication data to a server, either during
the handshake or in post-handshake authentication, cannot be sure
whether the server afterwards considers the client to be
authenticated or not.If the client needs to determine if the server
considers the connection to be unilaterally or mutually
authenticated, this has to be provisioned by the application layer.
See [CHHSV17] for details.In addition, the analysis of
post-handshake authentication from [Kraw16] shows that the client
identified by the certificate sent in the post-handshake phase
possesses the traffic key.This party is therefore the client that
participated in the original handshake or one to whom the original
client delegated the traffic key (assuming that the traffic key has
not been compromised).
E.1.3. 0-RTT
The 0-RTT mode of operation generally provides security properties
similar to those of 1-RTT data, with the two exceptions that the
0-RTT encryption keys do not provide full forward secrecy and that
the server is not able to guarantee uniqueness of the handshake
(non-replayability) without keeping potentially undue amounts of
state.See Section 8 for mechanisms to limit the exposure to replay.
E.1.4.Exporter Independence
The exporter_master_secret and early_exporter_master_secret are
derived to be independent of the traffic keys and therefore do not
represent a threat to the security of traffic encrypted with those
keys.However, because these secrets can be used to compute any
exporter value, they SHOULD be erased as soon as possible.If the
total set of exporter labels is known, then implementations SHOULD
pre-compute the inner Derive-Secret stage of the exporter computation
for all those labels, then erase the [early_]exporter_master_secret,
followed by each inner value as soon as it is known that it will not
be needed again.
E.1.5.Post-Compromise Security
TLS does not provide security for handshakes which take place after
the peers long-term secret (signature key or external PSK) is
compromised.It therefore does not provide post-compromise security
[CCG16], sometimes also referred to as backward or future secrecy.
This is in contrast to KCI resistance, which describes the security
guarantees that a party has after its own long-term secret has been
compromised.
Rescorla Standards Track[Page 146]
RFC 8446 TLS August 2018
E.1.6.External References
The reader should refer to the following references for analysis of
the TLS handshake: [DFGS15], [CHSV16], [DFGS16], [KW16], [Kraw16],
[FGSW16], [LXZFH16], [FG17], and [BBK17].
E.2.Record Layer
The record layer depends on the handshake producing strong traffic
secrets which can be used to derive bidirectional encryption keys and
nonces.Assuming that is true, and the keys are used for no more
data than indicated in Section 5.5, then the record layer should
provide the following guarantees:
Confidentiality:An attacker should not be able to determine the
plaintext contents of a given record.
Integrity:An attacker should not be able to craft a new record
which is different from an existing record which will be accepted
by the receiver.
Order protection/non-replayability:An attacker should not be able
to cause the receiver to accept a record which it has already
accepted or cause the receiver to accept record N+1 without having
first processed record N.
Length concealment:Given a record with a given external length, the
attacker should not be able to determine the amount of the record
that is content versus padding.
Forward secrecy after key change:If the traffic key update
mechanism described in Section 4.6.3 has been used and the
previous generation key is deleted, an attacker who compromises
the endpoint should not be able to decrypt traffic encrypted with
the old key.
Informally, TLS 1.3 provides these properties by AEAD-protecting the
plaintext with a strong key.AEAD encryption [RFC5116] provides
confidentiality and integrity for the data.Non-replayability is
provided by using a separate nonce for each record, with the nonce
being derived from the record sequence number (Section 5.3), with the
sequence number being maintained independently at both sides; thus,
records which are delivered out of order result in AEAD deprotection
failures.In order to prevent mass cryptanalysis when the same
plaintext is repeatedly encrypted by different users under the same
key (as is commonly the case for HTTP), the nonce is formed by mixing
Rescorla Standards Track[Page 147]
RFC 8446 TLS August 2018
the sequence number with a secret per-connection initialization
vector derived along with the traffic keys.See [BT16] for analysis
of this construction.
The rekeying technique in TLS 1.3 (see Section 7.2) follows the
construction of the serial generator as discussed in [REKEY], which
shows that rekeying can allow keys to be used for a larger number of
encryptions than without rekeying.This relies on the security of
the HKDF-Expand-Label function as a pseudorandom function (PRF).In
addition, as long as this function is truly one way, it is not
possible to compute traffic keys from prior to a key change (forward
secrecy).
TLS does not provide security for data which is communicated on a
connection after a traffic secret of that connection is compromised.
That is, TLS does not provide post-compromise security/future
secrecy/backward secrecy with respect to the traffic secret.Indeed,
an attacker who learns a traffic secret can compute all future
traffic secrets on that connection.Systems which want such
guarantees need to do a fresh handshake and establish a new
connection with an (EC)DHE exchange.
E.2.1.External References
The reader should refer to the following references for analysis of
the TLS record layer: [BMMRT15], [BT16], [BDFKPPRSZZ16], [BBK17], and
[PS18].
E.3.Traffic Analysis
TLS is susceptible to a variety of traffic analysis attacks based on
observing the length and timing of encrypted packets [CLINIC]
[HCJC16].This is particularly easy when there is a small set of
possible messages to be distinguished, such as for a video server
hosting a fixed corpus of content, but still provides usable
information even in more complicated scenarios.
TLS does not provide any specific defenses against this form of
attack but does include a padding mechanism for use by applications:
The plaintext protected by the AEAD function consists of content plus
variable-length padding, which allows the application to produce
arbitrary-length encrypted records as well as padding-only cover
traffic to conceal the difference between periods of transmission and
periods of silence.Because the padding is encrypted alongside the
actual content, an attacker cannot directly determine the length of
the padding but may be able to measure it indirectly by the use of
timing channels exposed during record processing (i.e., seeing how
long it takes to process a record or trickling in records to see
Rescorla Standards Track[Page 148]
RFC 8446 TLS August 2018
which ones elicit a response from the server).In general, it is not
known how to remove all of these channels because even a
constant-time padding removal function will likely feed the content
into data-dependent functions.At minimum, a fully constant-time
server or client would require close cooperation with the
application-layer protocol implementation, including making that
higher-level protocol constant time.
Note: Robust traffic analysis defenses will likely lead to inferior
performance due to delays in transmitting packets and increased
traffic volume.
E.4.Side-Channel Attacks
In general, TLS does not have specific defenses against side-channel
attacks (i.e., those which attack the communications via secondary
channels such as timing), leaving those to the implementation of the
relevant cryptographic primitives.However, certain features of TLS
are designed to make it easier to write side-channel resistant code:
Unlike previous versions of TLS which used a composite MAC-then-
encrypt structure, TLS 1.3 only uses AEAD algorithms, allowing
implementations to use self-contained constant-time
implementations of those primitives.
TLS uses a uniform bad_record_mac alert for all decryption
errors, which is intended to prevent an attacker from gaining
piecewise insight into portions of the message.Additional
resistance is provided by terminating the connection on such
errors; a new connection will have different cryptographic
material, preventing attacks against the cryptographic primitives
that require multiple trials.
Information leakage through side channels can occur at layers above
TLS, in application protocols and the applications that use them.
Resistance to side-channel attacks depends on applications and
application protocols separately ensuring that confidential
information is not inadvertently leaked.
Rescorla Standards Track[Page 149]
RFC 8446 TLS August 2018
E.5.Replay Attacks on 0-RTT
Replayable 0-RTT data presents a number of security threats to TLS-
using applications, unless those applications are specifically
engineered to be safe under replay (minimally, this means idempotent,
but in many cases may also require other stronger conditions, such as
constant-time response).Potential attacks include:
Duplication of actions which cause side effects (e.g., purchasing
an item or transferring money) to be duplicated, thus harming the
site or the user.
Attackers can store and replay 0-RTT messages in order to reorder
them with respect to other messages (e.g., moving a delete to
after a create).
Exploiting cache timing behavior to discover the content of 0-RTT
messages by replaying a 0-RTT message to a different cache node
and then using a separate connection to measure request latency,
to see if the two requests address the same resource.
If data can be replayed a large number of times, additional attacks
become possible, such as making repeated measurements of the speed of
cryptographic operations.In addition, they may be able to overload
rate-limiting systems.For a further description of these attacks,
see [Mac17].
Ultimately, servers have the responsibility to protect themselves
against attacks employing 0-RTT data replication.The mechanisms
described in Section 8 are intended to prevent replay at the TLS
layer but do not provide complete protection against receiving
multiple copies of client data.TLS 1.3 falls back to the 1-RTT
handshake when the server does not have any information about the
client, e.g., because it is in a different cluster which does not
share state or because the ticket has been deleted as described in
Section 8.1.If the application-layer protocol retransmits data in
this setting, then it is possible for an attacker to induce message
duplication by sending the ClientHello to both the original cluster
(which processes the data immediately) and another cluster which will
fall back to 1-RTT and process the data upon application-layer
replay.The scale of this attack is limited by the clients
willingness to retry transactions and therefore only allows a limited
amount of duplication, with each copy appearing as a new connection
at the server.
Rescorla Standards Track[Page 150]
RFC 8446 TLS August 2018
If implemented correctly, the mechanisms described in Sections 8.1
and 8.2 prevent a replayed ClientHello and its associated 0-RTT data
from being accepted multiple times by any cluster with consistent
state; for servers which limit the use of 0-RTT to one cluster for a
single ticket, then a given ClientHello and its associated 0-RTT data
will only be accepted once.However, if state is not completely
consistent, then an attacker might be able to have multiple copies of
the data be accepted during the replication window.Because clients
do not know the exact details of server behavior, they MUST NOT send
messages in early data which are not safe to have replayed and which
they would not be willing to retry across multiple 1-RTT connections.
Application protocols MUST NOT use 0-RTT data without a profile that
defines its use.That profile needs to identify which messages or
interactions are safe to use with 0-RTT and how to handle the
situation when the server rejects 0-RTT and falls back to 1-RTT.
In addition, to avoid accidental misuse, TLS implementations MUST NOT
enable 0-RTT (either sending or accepting) unless specifically
requested by the application and MUST NOT automatically resend 0-RTT
data if it is rejected by the server unless instructed by the
application.Server-side applications may wish to implement special
processing for 0-RTT data for some kinds of application traffic
(e.g., abort the connection, request that data be resent at the
application layer, or delay processing until the handshake
completes).In order to allow applications to implement this kind of
processing, TLS implementations MUST provide a way for the
application to determine if the handshake has completed.
E.5.1.Replay and Exporters
Replays of the ClientHello produce the same early exporter, thus
requiring additional care by applications which use these exporters.
In particular, if these exporters are used as an authentication
channel binding (e.g., by signing the output of the exporter), an
attacker who compromises the PSK can transplant authenticators
between connections without compromising the authentication key.
In addition, the early exporter SHOULD NOT be used to generate
server-to-client encryption keys because that would entail the reuse
of those keys.This parallels the use of the early application
traffic keys only in the client-to-server direction.
Rescorla Standards Track[Page 151]
RFC 8446 TLS August 2018
E.6.PSK Identity Exposure
Because implementations respond to an invalid PSK binder by aborting
the handshake, it may be possible for an attacker to verify whether a
given PSK identity is valid.Specifically, if a server accepts both
external-PSK handshakes and certificate-based handshakes, a valid PSK
identity will result in a failed handshake, whereas an invalid
identity will just be skipped and result in a successful certificate
handshake.Servers which solely support PSK handshakes may be able
to resist this form of attack by treating the cases where there is no
valid PSK identity and where there is an identity but it has an
invalid binder identically.
E.7.Sharing PSKs
TLS 1.3 takes a conservative approach to PSKs by binding them to a
specific KDF.By contrast, TLS 1.2 allows PSKs to be used with any
hash function and the TLS 1.2 PRF.Thus, any PSK which is used with
both TLS 1.2 and TLS 1.3 must be used with only one hash in TLS 1.3,
which is less than optimal if users want to provision a single PSK.
The constructions in TLS 1.2 and TLS 1.3 are different, although they
are both based on HMAC.While there is no known way in which the
same PSK might produce related output in both versions, only limited
analysis has been done.Implementations can ensure safety from
cross-protocol related output by not reusing PSKs between TLS 1.3 and
TLS 1.2.
E.8.Attacks on Static RSA
Although TLS 1.3 does not use RSA key transport and so is not
directly susceptible to Bleichenbacher-type attacks [Blei98], if TLS
1.3 servers also support static RSA in the context of previous
versions of TLS, then it may be possible to impersonate the server
for TLS 1.3 connections [JSS15].TLS 1.3 implementations can prevent
this attack by disabling support for static RSA across all versions
of TLS.In principle, implementations might also be able to separate
certificates with different keyUsage bits for static RSA decryption
and RSA signature, but this technique relies on clients refusing to
accept signatures using keys in certificates that do not have the
digitalSignature bit set, and many clients do not enforce this
restriction.
Rescorla Standards Track[Page 152]
RFC 8446 TLS
August 2018
Contributors
Martin Abadi
University of California, Santa Cruz
[email protected]
Christopher Allen
(co-editor of TLS 1.0)
Alacrity Ventures
[email protected]
Richard Barnes
Cisco
[email protected]
Steven M. Bellovin
Columbia University
[email protected]
David Benjamin
Google
[email protected]
Benjamin Beurdouche
INRIA & Microsoft Research
[email protected]
Karthikeyan Bhargavan
(editor of [RFC7627])
INRIA
[email protected]
Simon Blake-Wilson
(co-author of [RFC4492])
BCI
[email protected]
Nelson Bolyard
(co-author of [RFC4492])
Sun Microsystems, Inc.
[email protected]
Ran Canetti
IBM
[email protected]
Rescorla
Standards Track
[Page 153]
RFC 8446 TLS
August 2018
Matt Caswell
OpenSSL
[email protected]
Stephen Checkoway
University of Illinois at Chicago
[email protected]
Pete Chown
Skygate Technology Ltd
[email protected]
Katriel Cohn-Gordon
University of Oxford
[email protected]
Cas Cremers
University of Oxford
[email protected]
Antoine Delignat-Lavaud
(co-author of [RFC7627])
INRIA
[email protected]
Tim Dierks
(co-author of TLS 1.0, co-editor of TLS 1.1 and 1.2)
Independent
[email protected]
Roelof DuToit
Symantec Corporation
[email protected]
Taher Elgamal
Securify
[email protected]
Pasi Eronen
Nokia
[email protected]
Cedric Fournet
Microsoft
[email protected]
Rescorla
Standards Track
[Page 154]
RFC 8446
TLS
August 2018
Anil Gangolli
[email protected]
David M. Garrett
[email protected]
Illya Gerasymchuk
Independent
[email protected]
Alessandro Ghedini
Cloudflare Inc.
[email protected]
Daniel Kahn Gillmor
ACLU
[email protected]
Matthew Green
Johns Hopkins University
[email protected]
Jens Guballa
ETAS
[email protected]
Felix Guenther
TU Darmstadt
[email protected]
Vipul Gupta
(co-author of [RFC4492])
Sun Microsystems Laboratories
[email protected]
Chris Hawk
(co-author of [RFC4492])
Corriente Networks LLC
[email protected]
Kipp Hickman
Alfred Hoenes
David Hopwood
Independent Consultant
[email protected]
Rescorla Standards Track
[Page 155]
RFC 8446 TLS
August 2018
Marko Horvat
MPI-SWS
[email protected]
Jonathan Hoyland
Royal Holloway, University of London
[email protected]
Subodh Iyengar
Facebook
[email protected]
Benjamin Kaduk
Akamai Technologies
[email protected]
Hubert Kario
Red Hat Inc.
[email protected]
Phil Karlton
(co-author of SSL 3.0)
Leon Klingele
Independent
[email protected]
Paul Kocher
(co-author of SSL 3.0)
Cryptography Research
[email protected]
Hugo Krawczyk
IBM
[email protected]
Adam Langley
(co-author of [RFC7627])
Google
[email protected]
Olivier Levillain
ANSSI
[email protected]
Rescorla Standards Track
[Page 156]
RFC 8446 TLS
August 2018
Xiaoyin Liu
University of North Carolina at Chapel Hill
[email protected]
Ilari Liusvaara
Independent
[email protected]
Atul Luykx
K.U. Leuven
[email protected]
Colm MacCarthaigh
Amazon Web Services
[email protected]
Carl Mehner
USAA
[email protected]
Jan Mikkelsen
Transactionware
[email protected]
Bodo Moeller
(co-author of [RFC4492])
Google
[email protected]
Kyle Nekritz
Facebook
[email protected]
Erik Nygren
Akamai Technologies
[email protected]
Magnus Nystrom
Microsoft
[email protected]
Kazuho Oku
DeNA Co., Ltd.
[email protected]
Rescorla
Standards Track
[Page 157]
RFC 8446 TLS
August 2018
Kenny Paterson
Royal Holloway, University of London
[email protected]
Christopher Patton
University of Florida
[email protected]
Alfredo Pironti
(co-author of [RFC7627])
INRIA
[email protected]
Andrei Popov
Microsoft
[email protected]
Marsh Ray
(co-author of [RFC7627])
Microsoft
[email protected]
Robert Relyea
Netscape Communications
[email protected]
Kyle Rose
Akamai Technologies
[email protected]
Jim Roskind
Amazon
[email protected]
Michael Sabin
Joe Salowey
Tableau Software
[email protected]
Rich Salz
Akamai
[email protected]
David Schinazi
Apple Inc.
[email protected]
Rescorla
Standards Track
[Page 158]
RFC 8446 TLS
August 2018
Sam Scott
Royal Holloway, University of London
[email protected]
Thomas Shrimpton
University of Florida
[email protected]
Dan Simon
Microsoft, Inc.
[email protected]
Brian Smith
Independent
[email protected]
Brian Sniffen
Akamai Technologies
[email protected]
Nick Sullivan
Cloudflare Inc.
[email protected]
Bjoern Tackmann
University of California, San Diego
[email protected]
Tim Taubert
Mozilla
[email protected]
Martin Thomson
Mozilla
[email protected]
Hannes Tschofenig
Arm Limited
[email protected]
Sean Turner
sn3rd
[email protected]
Steven Valdez
Google
[email protected]
Rescorla
Standards Track
[Page 159]
RFC 8446 TLS
August 2018
Filippo Valsorda
Cloudflare Inc.
[email protected]
Thyla van der Merwe
Royal Holloway, University of London
[email protected]
Victor Vasiliev
Google
[email protected]
Hoeteck Wee
Ecole Normale Superieure, Paris
[email protected]
Tom Weinstein
David Wong
NCC Group
[email protected]
Christopher A. Wood
Apple Inc.
[email protected]
Tim Wright
Vodafone
[email protected]
Peter Wu
Independent
[email protected]
Kazu Yamamoto
Internet Initiative Japan Inc.
[email protected]
Authors Address
Eric Rescorla
Mozilla
Email: [email protected]
Rescorla
Standards Track
[Page 160]
Reviews
There are no reviews yet.