CS2208b Assignment 3
Issued on: Thursday, February 28, 2019
Due by: 11:55 pm on Thursday, March 7, 2019
For this assignment, only an electronic submission (attachments) at owl.uwo.ca is required.
Attachments must include:
o ONE pdf file (named report1.pdf) that has the two flowcharts, program documentations, and any related communications, if any.
o TWO Text files (named question1.s and question2.s) that have softcopy of the assembly source programs you wrote for each question (one program per file), i.e., TWO assembly source files in total.
So, in total, you will submit 1 + 2 = 3 files (report1.pdf, question1.s and question2.s)
Failure to follow the above format may cost you 10% of the total assignment mark.
Late assignments are strongly discouraged
10% will be deducted from a late assignment (up to 24 hours after the due date/time)
After 24 hours from the due date/time, late assignments will receive a zero grade.
In this assignment, you will use the micro Vision ARM simulator by Keil, which is an MS Windows based software, to develop the required programs in this assignment. The simulator (version 4) has been installed on all PCs at GEN labs, except NCB-105.
The Keil micro Vision simulator may also be installed on your Windows PC. You just need to download it from OWL and install it.
Programming Style
Programming style is very important in assembly language. It is expected to do the following in your programs:
Using EQU directive to give a symbolic name to a numeric constant to make it more readable.
Applying neat spacing and code organization:
o Assembly language source code should be arranged in three columns: label, instruction, and comments: the label field starts at the beginning of the line,
the instruction field (opcodes + operands) starts at the next TAB stop, and
the comments are aligned in a column on the right.
Using appropriate label names.
Commenting each assembly line
Commenting each logical part of your code.
Great Ways to Lose Marks
Not grouping your lines into logical ideas
Not appropriately using whitespace
Not bothering to comment your code
Commenting the code by just stating what youre doing, instead of why, e.g.,
MOV r0, #5;move 5 into r0
Not paying attention to the programming style (see the previous paragraph)
Not optimizing your code by using unnecessary assembly instructions. The more instructions in your program
the less your mark will be.
Handing in your code as soon as it assembles, without testing and validating your code
Not using proper flowchart symbols
Not following the flowchart rules
Copyright 2019 Mahmoud El-Sakka.
QUESTION 1 (50 marks)
Most goods sold in U.S. and Canadian stores are marked with a Universal Product Code (UPC). The meanings of the digits underneath the bar code (from left to right) are:
First digit: type of item,
First group of five digits: manufacturer,
Second group of five digits: product, and
Final digit: check digit, used to help identify an error in the preceding digits.
To compute the check digit,
Add the first, third, fifth, seventh, ninth, and eleventh digits
Add the second, fourth, sixth, eighth, and tenth digits
Multiply the first sum by 3 and add it to the second sum
The check digit is the digit which, when added to the above sum, produces a sum that is multiple of 10
o Subtract1fromthetotal
o Computetheremainderwhentheadjustedtotalisdividedby10 o Subtracttheremainderfrom9
Example for UPC 0 13800 15073 8:
Firstsum:0+3+0+1+0+3=7
Secondsum:1+8+0+5+7=21
Multiplying the first sum by 3 and adding the second yields 42
Subtracting 1 gives 41
Remainder upon dividing by 10 is 1
Remainder is subtracted from 9
Result is 8
Draw a detailed flowchart and write an ARM assembly program to just verify whether a string of 12 ASCII encoded digits stored in memory is a valid UPC or not. If valid, you should store 1 in r0, if not, you should store 2 in r0. Your code should be highly optimized. Use as few instructions as possible (as little as 19 assembly instructions only, NOT including any assembly directives or data definitions)!!.
Define in your assembly program the 12 digits UPC string as follow:
UPCDCB 013800150738 ;UPC string
To test your program, you can use the following UPCs:
0 60383 75557 7
0 65633 45471 2
You can also get more UPC codes from your own kitchen items.
HINT 1: To load a byte to a register, use LDRB not LDR.
HINT 2: To calculate 3 Z, you can do so using only one ADD instruction with LSL#1 shift. HINT 3: You can implement the division operation using repeated subtraction.
QUESTION 2 (50 marks)
Draw a detailed flowchart and write an ARM assembly program to determine whether a string of printable ASCII letters (from a to z or from A to Z, case insensitive) stored in memory is a palindrome (i.e., the letters in the string are the same from left to right as from right to left, case insensitive) or not. If palindrome, you should store 1 in r0, if not, you store 2 in r0. Your code should be highly optimized. Use as few instructions as possible (as little as 21 assembly instructions only NOT including any assembly directives or data definitions)!!.
Ignore all characters that are not letters. You should also treat capital and small letters the same, i.e., case insensitive. For example, madam, deleveled, Noon, He lived as a devil, eh?, and Was it a car or a cat I saw? are palindrome strings. However, madam, I am Adam. is not a palindrome string.
A string can have even or odd number of characters and must end with character 0x00 (i.e., the ASCII code of the null character).
Define in your assembly program the string as follow:
STRING DCB He lived as a devil, eh? ;string
EoSDCB 0x00 ;end of string
Copyright 2019 Mahmoud El-Sakka.
Reviews
There are no reviews yet.