[Solved] CSE417 Assignment 2 -articulation points algorithm

This assignment is part written, part programming. It all focuses on the articulation points algorithm presented in class, and the related problem of decomposing a graph into its biconnected components (defined below). I strongly recommend that you do problems 13 before you start the programming portion, and do them soon so you have time to ask questions before you get immersed in coding.

Recall that a vertex in a connected undirected graph is an articulation point if removing it (and all edges incident to it, i.e., touching it) results in a non-connected graph. (More generally, in a not-necessarily-connected graph, if it increases the number of connected components). As important special cases, a graph having a single vertex has no articulation points, nor does the graph having just two vertices and one edge.

1. [10 points] Simulate the algorithm presented in class for finding articulation points on the graph shown below.

Redraw the graph clearly showing (a) tree edges, (b) back edges, and, in a tidy table similar to ones shown in the slides, list (c) the DFS number and (d) LOW value assigned to each vertex, and (e) identify the articulation points. In addition, (f) list the edges in the order that they are explored (i.e., traversed for the 1st time) by the algorithm. For definiteness, start your DFS at vertex C and whenever the algorithm has a choice of which edge to follow next, pick the edge to the alphabetically first vertex among the choices. (Note that this is not a requirement of the algorithm; its just to simplify grading. The algorithm would correctly identify all articulation points no matter the order in which edges are traversed.)

2. [10 points] A connected graph is biconnected if it has no articulation points. A biconnected component of an undirected graph G = (V,E) is a maximal subset B of the edges with the property that the graph G_B = (V_B,B) is biconnected, where V_B is the subset of vertices incident to (touched by) edges in B. (I.e., G_B is Bs edgeinduced subgraph. Maximal means you cant enlarge B without destroying its biconnected property.)

Note that a graph consisting of single edge is biconnected. Consequently, every edge in G is part of some biconnected component. In fact, every edge is part of exactly one biconnected components. (This really needs a proof, which you dont need to give, but basically its true because if some edge were in two components, their union would also be biconnected, contradicting the maximality condition.) So, the biconnected components partition the edges. To reiterate a point that many people overlook on first reading: a biconnected component is a set of edges, not a set if vertices. Each components edge-induced subgraph of course defines a set of vertices, but these vertex sets do not partition the vertices: they overlap. (Where?) Another fact, just to help your intuition: two distinct edges lie on a common simple cycle if and only if they are in the same biconnected component. (This motivates the term biconnectedthere are always two independent paths between places. Again, these statements need careful proof, but the idea is simple: if there werent two paths, you could disconnect the graph by removing some vertex on the one path.)

For example, the biconnected components of the graph below are the five sets of edges:

• Component 1: {{A,D},{A,E},{D,E},{D,I},{E,J},{I,J}}
• Component 2: {{B,E}}
• Component 3: {{C,H},{C,I},{H,I}}
• Component 4: {{F,G},{F,J},{G,K},{J,K}}, and
• Component 5: {{K,L}}

Find and list the biconnected components of the graph in problem 1.

3. [20 points] There is a very close relationship between biconnected components and articulation points. Namely, the articulation points are exactly the vertices at which two (or more) biconnected components are connected. Given this fact, it shouldnt be a big surprise that there is a linear time algorithm that identifies the biconnected components of a graph, and in fact this algorithm is quite similar to the articulation point algorithm.

Give a modification of the articulation-points algorithm that finds biconnected components in linear time. Describe the algorithm (in English; it should only take a few sentences to describe the necessary modifications; 10 points). Simulate it on the example in problem 1, showing enough of a trace of the algorithms execution to demonstrate that it finds exactly the components you found above (6 points). [Hints: look carefully at the order in which the articulation points algorithm explores edges and discovers articulation points, and relate this to which edges are part of which biconnected components. Among other things, you might want to circle or otherwise mark the biconnected components on the edge list you produced as part of your solution to problem 1 (step (f)). Initially, focus on the first biconnected component to be completely explored by the depth-first search.] As always, you should discuss both correctness and complexity of your algorithm, but for this problem, only a short paragraph is required for each, not full proofs (4 points).

4. [50 points] Implement, test, and time the algorithm you found in problem 3. It is sufficient if your algorithm only handles connected graphs.

Input format: To keep things simple, the input will consist of an odd number of whitespace-separated integers. The first must be a positive integer N; this is followed by some number of pairs of integers in the range 0 to N 1. N represents the number of vertices in the graph, and each pair u,v represents an edge between vertices u and v. Although a good program really should check for the following malformed inputs, you may simply assume that you never get: negative numbers, numbers outside the range 0 to N 1, an even number of integers in total (i.e., the last pair is unfinished), or a pair u,v where u = v, or where either (u,v) or (v,u) duplicates a previous pair in the list. The listed edges may appear in any order. You may choose whether to read the input from stdin or from one or more files named on the command line. (The later may be more convenient for your timing study, described below.) Clearly state which you have chosen.

Output Format: Print out the number of nodes, number of edges, number of biconnected components, number of articulation points, list the articulation points, list the edges in each biconnected component, and the algorithms run time (excluding input/output; see below).

Implementation: I dont much care what programming language you use; C/C++/C#, Java, Perl, Python, R, Ruby all seem reasonable (ask otherwise). You should use some flavor of edge-list representation so that your algorithm is faster on sparse graphs, but I recommend keeping this as simple as possible. In particular, you may use built-in or standard library packages for hash tables, lists, dynamic arrays, etc., for the edge lists so that you dont need to spend a lot of time duplicating all that fun linked list code you wrote in your data structures course. (However, depending on the language you chose, you may need to be careful to avoid hidden (n) operations such as copying large data structures, which may increase your algorithms asymptotic run time.) Since the time spent reading the graph is excluded from your timing study (below), its OK if the data structures are somewhat slow to construct, just so you can efficiently traverse all the edges as needed by the main algorithm. Also, you do not have to obey anything like the order edges alphabetically convention I use on by-hand examplesjust traverse them in whatever order comes naturally for your data structure.

Testing: Run it on the specific sample graph that I will provide later in the .zip archive linked here and turn in the output of your program when run on this test case. (You should of course do more extensive testing as well, both much simpler and much more complex examples, but you only need to turn in this one case.) Timing: Also run it on a variety of graphs of different sizes and different densities (average number of edges per vertex) and measure its run time on each.

To simplify your job doing the timing measurements, this zip archive (0.5 Mb) contains a number of random graphs of various sizes in the specified input format (in the tests folder). Each should be connected and have one or more biconnected components. If you are interested in viewing them, the smaller of those graphs are also provided as corresponding .dot files (in the dots folder) for the wonderful, free Graphviz program, or its companion web viewer www.webgraphviz.com. If you want to run some larger tests, this zip archive (89 Mb) contains additional examples. If you want to generate more test cases, or are curious, the generator folder contains the C and R code I used to generate these examples. (For the curious, a file named n64d3s3.txt has 64 nodes with average degree around 3; s = 3 is the seed for the random number generator, irrelevant except for reproducibility.) You are not required to use any of this.

Two hints on timing measurements: Record separately or exclude from your timing measurements the time spent reading inputs, since this may dominate the interesting part. Similarly, except for the summary parameters giving numbers of vertices, edges and components, you may want to disable output formatting and printing during your timing runs. See also the FAQ page for other timing tips.

Results: Write a brief report (2-3 pages, say) summarizing your measurements. Include two graphs (old fashioned scatter plots) of run time versus problem size, one with size defined by the number of vertices, the other with size defined by number of edges. Which do you find most informative, and why? Fit trend lines to the data (e.g., with Excel or R). Compare to the theoretical big-O bounds for your sample graphs. Are your observations in line with the dogma we spout about the utility of big-O analysis? Are there discrepancies? Can you explain them? Does number of edges versus number of vertices have any bearing on performance? Also, if possible, give us a quick summary of the kind of processor/memory system on which you ran your timing tests. E.g., 1.2 Ghz Intelerola Kryptonite dodeca-core processor with 64 kb cache @ 5Ghz and 96 Gb DDR7 DRAM @ 2Ghz.

Turn In: Place your answers to written questions 13 and your brief report into a single .txt or .pdf file named hw2.txt or hw2.pdf. Capture the output of your program on the required test case in a single .txt file named testout.txt. Name your source code file, e.g., hw2.java. Turn in these files via Canvas. (Canvas only accepts specific file suffixes; if you used a programming language whose suffix is not on the list, add .txt.) Please include your name, student ID and UW netid (email) on all parts so that we can easily correlate them.

5. Extra Credit: One or more of:

• Give reasonably complete proofs of either or both the two statements flagged as needing proof in the second paragraph of problem 2.
• Also describe and implement any other algorithm you like for solving the problem, e.g., either of these incompletely specified, probably slow ones:

As mentioned, two (different) edges are in the same biconnected component if and only there is a simple cycle in G that includes both. So, you could do something like this: for every pair of edges, try to find a path from one to the other (maybe by BFS), and then try to find a path back, excluding the edges in the path already taken.

Another approach might grow out of this brute-force articulation points algorithm: delete each vertex in turn and see whether the graph remains connected.

• Give a big-O analysis of the running time for the algorithm you implemented in part 5b.
• Run this algorithm on the same set of graphs as you did the linear time algorithm (or at least the smaller graphs; it may be too slow on large ones).
• Extend your report to include the run times for this algorithm in comparison to both the linear time algorithm and to the general big-O dogma.

Extend your algorithm(s) to handle unconnected graphs