[Solved] CSE150 Lab 4-Implementing a Simple Router

Implementing a Simple Router

In the previous lab you implemented a simple firewall that allowed ARP and TCP packets, but blocked all other packets. For your final project, you will be expanding on this to implement routing between devices on different subnets, and implementing firewalls for certain subnets. The idea is to simulate an actual production network. You will be using ideas from Lab 1 to help construct the mininet topology, and ideas from Lab 3 to implement the rules allowing for traffic to flow through your network. Please refer back to those Labs for guidance on how to complete this assignment.

Assignment:

For this lab, we will be constructing a network for a small company. The company has a 3-floor building, with each floor having its own switch and subnet. Additionally, we have a switch and subnet for all the servers in the data center, and a core switch connecting everything together.

Your devices roles and IP addresses are as follows:

The topology will look as follows:

Your goal will be to allow traffic to be transmitted between all the hosts. In this assignment, you will be allowed (and encouraged) to flood all non-IP traffic in the same method that you did in Lab 3 (using a destination port of of.OFPP_FLOOD). However, you will need to specify specific ports for all IP traffic. You may do this however you choose however, you may find it easiest to determine the correct destination port by using the destination IP address and source IP address, as well as the source port on the switch that the packet originated from.

Additional information has been given to you in the do_final() function to allow you to make these decisions. Please see the comments in the provided code for guidance.

Additionally, to protect our servers from the untrusted Internet, we will be blocking all IP traffic from the Untrusted Host to the Server. To block the Internet from discovering our internal IP addresses, we will also block all ICMP traffic from the Untrusted Host to anywhere internally.

You will be required to demonstrate your project to the TAs. You will need to explain how you implemented the various requirements and show that they work properly. If you need help figuring out how to do this, look back to previous assignments and see how you tested them.

Provided Code:

Available in a ZIP file here.

https://users.soe.ucsc.edu/~qian/code/final_project.zip

We have provided you with starter code (skeleton files) to get you started on this assignment. The controller file (final_controller_skel.py) needs to be placed in ~/pox/pox/misc, and the mininet file (final.py) should be placed in your home directory (~). This time, you will need to modify both files to meet the lab requirements.

You will be using slightly different commands to create the Hosts and Links in the Mininet file to give you more information to make decisions within the Controller file. Additionally, you will notice that you have additional information provided in the do_final function. This is documented in the comments within the files.

Summary of Goals:

• Create a Mininet Topology (See Lab 1 for help) to represent the above topology.
• Create a Pox controller (See Lab 3 for help) with the following features:
• All hosts able to communicate, EXCEPT:
• Untrusted Host cannot send ICMP traffic to Host 1, Host 2, Host 3, or the Server.
• Untrusted Host cannot send any IP traffic to the Server.

Testing:

You may test with ping commands, xterm windows, and observing packets with Wireshark inside your VM. Please have a plan in place to show you have implemented all the requirements during your demonstration to the TAs.