Part 1. Queues and Red Black Trees
For Part 1, name your project RedBlackTreeSpellCheckerProject.
Write a spell checker that is based on a red black tree. The execution of the program, when run with shortWords.txt as a command line argument, will appear as follows:
java RedBlackTreeSpellChecker shortwords.txt
Loading a tree of English words from shortwords.txt.
Red Black Tree is loaded with 10 words.
Initial tree height is 3.
Never worse than 2 * Lg( n+1) = 6.918804721654216.
Legal commands are:
d display the entire word tree with a level order traversal.
s print the words of the tree in sorted order (using an inorder traversal).
r print the words of the tree in reverse sorted order (reverse inorder traversal).
c <word> to spell check this word.
a <word> add this word to tree.
f <fileName> to check this text file for spelling errors.
i display the diameter of the tree.
m view this menu.
! to quit.
c aaa
aaa Not in dictionary. Perhaps you mean
aa
>c aa
Found aa after 3 comparisons
>a mike
mike was added to dictionary.
>c mike
Found mike after 4 comparisons
>c mik
mik Not in dictionary. Perhaps you mean
mike
>a mik
mik was added to dictionary.
>d
Level order traversal
[data = aal:Color = Black:Parent = -1: LC = a: RC = aam]
[data = a:Color = Black:Parent = aal: LC = Aani: RC = aa]
[data = aam:Color = Black:Parent = aal: LC = aalii: RC = aardwolf]
[data = Aani:Color = Black:Parent = a: LC = A: RC = Aaron]
[data = aa:Color = Black:Parent = a: LC = -1: RC = -1]
[data = aalii:Color = Black:Parent = aam: LC = -1: RC = -1]
[data = aardwolf:Color = Red:Parent = aam: LC = aardvark: RC = mike]
[data = A:Color = Red:Parent = Aani: LC = -1: RC = -1]
[data = Aaron:Color = Red:Parent = Aani: LC = -1: RC = -1]
[data = aardvark:Color = Black:Parent = aardwolf: LC = -1: RC = -1]
[data = mike:Color = Black:Parent = aardwolf: LC = mik: RC = -1]
[data = mik:Color = Red:Parent = mike: LC = -1: RC = -1]
>c aalii
Found aalii after 3 comparisons
>!
Bye.
Here is another example. In this case we are using the much larger file words.txt.
The file words.txt is on the course schedule and consists of all of the words in the English language (in sorted order). We are also using the programs ability to spell check a text file.
java RedBlackTreeSpellChecker words.txt
Loading a tree of English words from shortwords.txt.
Red Black Tree is loaded with 235923 words.
Initial tree height is 32.
Never worse than 2 * Lg( n+1) = 35.69562343012844.
Legal commands are:
d display the entire word tree with a level order traversal.
s print the words of the tree in sorted order (using an inorder traversal).
r print the words of the tree in reverse sorted order (reverse inorder traversal).
c <word> to spell check this word.
a <word> add this word to tree.
f <fileName> to check this text file for spelling errors.
i display the diameter of the tree.
m view this menu.
! to quit.
>f shortwords.txt
No spelling errors found.
>f badwords.txt
This was not found in dictionary.
sume was not found in dictionary.
mispelled was not found in dictionary.
wirds was not found in dictionary.
And was not found in dictionary.
>!
Bye.
Note that the a command will not add a word to the dictionary if the word is already present in the dictionary. So, for example, if the user enters >a hello the output will be The word hello is already in the dictionary.
There will be three data files used for testing. There is a small word list called shortwords.txt and another large one called words.txt. A third file, used for testing the spell checkers f option, is called badwords.txt. The badwords.txt file will contain a few poorly spelled words. The original word list file name is passed to the program on the command line. Be sure to test your solution using the data found in shortwords.txt and words.txt. Along with badwords.txt, these files are found on the schedule.
On the class schedule is the javadoc specifications for three classes: Queue.java, RedBlackNode.java, and RedBlackTree.java. You are required to implement all of the methods described there. If you need additional methods, feel free to add them.
The RedBlackTree class is an implementation of a balanced binary search tree in Java. You have seen in class how a red black search tree works. Following the Javadoc specifications given, you are to write an implementation of the RedBlackTree class. Once you have completed your implementation, you should examine each method you have written and state the worst and best case Big-Theta functions (as you did in the first assignment). Include those big theta functions in your comments.
Note the method levelOrderTraversal().The method levelOrderTraversal() must use a queue to perform the traversal. So, you will need to write a queue class. Your queue class must be implemented as a circular array (as described in class and on the slides.). Be sure to use an array of Object references rather than Strings. The queue class will begin with an array of size 5. If the array overflows (which it will in this homework), your program will automatically double the size to 10. If this too overflows, increase the array size to 20, and so on. This increasing of the array size will be transparent to the caller. After allocating room for the new array, you will need to copy the old array contents to the new array.
An algorithm for a level order traversal is provided on the course slides. Details concerning red black trees may be found in the Javadoc provided. You should carefully follow the pseudocode provided (from CLR) and translate the pseudocode to Java.
Include a class called RedBlackTreeSpellChecker.java that has a main() routine that interacts with a user as shown above. RedBlackTreeSpellChecker.java will create the Red Black tree and fill it with words from the file specified on the command line. It will then allow the user to check a word (use c word) or add a word (use a word) or print the tree (use d, s or r) or spell check a text file (use f filename) or quit (use !). The i command will be used to compute the current diameter of the tree. The diameter of a tree is the length of the longest path between any two nodes in the tree. The menu itself may be redisplayed by using m for menu. If a word is not found on a spell check then a word that is near by in the tree should be displayed. How you compute near by is up to you. No sophisticated approach is required here define nearby in some reasonable manner. On all successful searches, the number of comparisons will be displayed. Also, note above the initial lines of output showing the height of the tree and the value of 2 * Lg (n + 1) where n is the number of tree entries. This is a base two log and represents the maximum height of a red black tree. You need to compute this value in your program.
Be very careful to use the exact same names as we did so that your RedBlackTree class will work with our test program.
Within the Javadoc of the RedBlackTree class, there is an example main() routine provided as a test case. Your main routine will generate the same style of output, i.e., for each node holding data in the red-black tree, be sure to show its color and value and the data in its parent, left child and right child nodes.
Part 2. Dynamic Programming
For Part 2, name your project WorldSeriesOddsProject.
Later in the course, we will visit the Floyd-Warshall all pairs shortest path algorithm. That algorithm uses dynamic programming to compute shortest paths in a graph. This exercise will introduce you to some of the fundamental ideas behind dynamic programming.
This assignment is based on a discussion of Dynamic Programming found in
Data Structures and Algorithms, by Aho, Hopcroft and Ullman.
ISBN 0-201-00023-7.
In the World Series of Major League Baseball, two teams play and the first to
win 4 games is the World Champion team. Lets suppose that the two teams are
equally matched and each has a 50% chance of winning any one game. Lets label
the two teams as A and B and let P(i,j) be the probability that if A needs i
games to win and B needs j games to win that A will eventually win the series.
For example, if the Pirates have won 2 games and the Cardinals have won 1, the
probability that the Pirates will win the series is P(2,3) = 11/16. We will see
how to compute that probability in a moment.
Note that if j > 0 then P(0,j) = 1. Why? Since the Pirates need 0 games to win,
the series is over and the Pirates have won.
Also, if i > 0 then P(i,0) = 0. Why? Since the Cardinals need no games to win,
the series is over and the Cardinals have won. The probability that the Pirates
will win is 0.
In general, some thinking arrives at the following recurrence relation:
P(i,j) = 1 if i = 0 and j > 0
= 0 if i > 0 and j = 0
= (P(i-1,j) + P(i,j-1))/2 if i > 0 and j > 0
The reasoning behind the bottom part of the recurrence is this:
Each team is equally likely to win. So P(i-1,j) is the probability
that the Pirates will win the series after winning the next game
and P(i,j-1) is the probability that the Pirates will win after
losing the next game. Since each team is equally likely to win, we
sum these probabilities and compute an average by dividing by 2.
When applying the recurrence, either i or j must go to 0. They both
cannot go to 0 at the same time.
Write a recursive routine that computes P(i,j). This recursive routine
should be based on the recurrence relation shown above. In other words,
given the recurrence, the recursive routine should be a simple translation
to Java. Use it to compute the following values and fill in the chart below.
Value Time in seconds (approximately)
P(2,3) = _____ _______
P(4,7) = _____ _______
P(7,6) = _____ _______
P(10, 12) = _____ _______
P(20, 23) = _____ _______
P(30,15) = _____ _______
P(50,40) = _____ _______
You may have had some trouble computing the above probabilities. The problem
is that we are computing the solutions to sub-problems over and over again. If
you ran out of time, place question marks in the appropriate blanks on the chart.
With a dynamic programming approach, we will build a two-dimensional
array that holds the values of all previously computed results. We can use
these previously computed values to compute the next probability.
Suppose that table T is a two dimensional array. The top row of this table (assuming the top left corner is at (0,0)) can be used to hold the probabilities when i = 0. Each of these would be 1.0. The leftmost column of this table, can be used to hold the probabilities
when j = 0. Each of these would be 0.0. Using the values in the table, one
can compute the remaining probabilities in a bottom-up fashion. T(i,j) can
be computed by referencing T(i-1,j) and T(i,j-1). Both of these values were
computed earlier.
Write a solution that computes P using dynamic programming. Again,
complete the following table.
Value Time in seconds (approximately)
P(2,3) = _____ _______
P(4,7) = _____ _______
P(7,6) = _____ _______
P(10, 12) = _____ _______
P(20, 23) = _____ _______
P(30,15) = _____ _______
P(50,40) = _____ _______
We computed P in two ways by using recursion and by dynamic programming. Which of these was faster and why?
Reviews
There are no reviews yet.