[SOLVED] CS代考计算机代写 cache /***************************************************************************/

/***************************************************************************/
/* */
/*ftmoderr.h */
/* */
/*FreeType module error offsets (specification). */
/* */
/*Copyright 2001-2015 by */
/*David Turner, Robert Wilhelm, and Werner Lemberg.*/
/* */
/*This file is part of the FreeType project, and may only be used, */
/*modified, and distributed under the terms of the FreeType project*/
/*license, LICENSE.TXT.By continuing to use, modify, or distribute */
/*this file you indicate that you have read the license and*/
/*understand and accept it fully.*/
/* */
/***************************************************************************/

/*************************************************************************/
/* */
/* This file is used to define the FreeType module error codes.*/
/* */
/* If the macro FT_CONFIG_OPTION_USE_MODULE_ERRORS in `ftoption.h’ is*/
/* set, the lower byte of an error value identifies the error code as*/
/* usual.In addition, the higher byte identifies the module.For*/
/* example, the error `FT_Err_Invalid_File_Format’ has value 0x0003, the */
/* error `TT_Err_Invalid_File_Format’ has value 0x1303, the error*/
/* `T1_Err_Invalid_File_Format’ has value 0x1403, etc. */
/* */
/* Note that `FT_Err_Ok’, `TT_Err_Ok’, etc. are always equal to zero,*/
/* including the high byte.*/
/* */
/* If FT_CONFIG_OPTION_USE_MODULE_ERRORS isn’t set, the higher byte of */
/* an error value is set to zero.*/
/* */
/* To hide the various `XXX_Err_’ prefixes in the source code, FreeType*/
/* provides some macros in `fttypes.h’.*/
/* */
/* FT_ERR( err ) */
/* Add current error module prefix (as defined with the*/
/* `FT_ERR_PREFIX’ macro) to `err’.For example, in the BDF module*/
/* the line*/
/* */
/* error = FT_ERR( Invalid_Outline );*/
/* */
/* expands to*/
/* */
/* error = BDF_Err_Invalid_Outline;*/
/* */
/* For simplicity, you can always use `FT_Err_Ok’ directly instead */
/* of `FT_ERR( Ok )’.*/
/* */
/* FT_ERR_EQ( errcode, err ) */
/* FT_ERR_NEQ( errcode, err )*/
/* Compare error code `errcode’ with the error `err’ for equality*/
/* and inequality, respectively.Example: */
/* */
/* if ( FT_ERR_EQ( error, Invalid_Outline ) )*/
/* … */
/* */
/* Using this macro you don’t have to think about error prefixes.*/
/* Of course, if module errors are not active, the above example is*/
/* the same as */
/* */
/* if ( error == FT_Err_Invalid_Outline )*/
/* … */
/* */
/* FT_ERROR_BASE( errcode )*/
/* FT_ERROR_MODULE( errcode )*/
/* Get base error and module error code, respectively. */
/* */
/* */
/* It can also be used to create a module error message table easily */
/* with something like */
/* */
/* { */
/* #undef __FTMODERR_H__ */
/* #define FT_MODERRDEF( e, v, s ){ FT_Mod_Err_ ## e, s }, */
/* #define FT_MODERR_START_LIST {*/
/* #define FT_MODERR_END_LIST { 0, 0 } };*/
/* */
/* const struct*/
/* { */
/* intmod_err_offset;*/
/* const char*mod_err_msg*/
/* } ft_mod_errors[] = */
/* */
/* #include FT_MODULE_ERRORS_H */
/* } */
/* */
/*************************************************************************/

#ifndef __FTMODERR_H__
#define __FTMODERR_H__

/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS*****/
/***** *****/
/*******************************************************************/
/*******************************************************************/

#undefFT_NEED_EXTERN_C

#ifndef FT_MODERRDEF

#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS
#define FT_MODERRDEF( e, v, s )FT_Mod_Err_ ## e = v,
#else
#define FT_MODERRDEF( e, v, s )FT_Mod_Err_ ## e = 0,
#endif

#define FT_MODERR_START_LISTenum {
#define FT_MODERR_END_LISTFT_Mod_Err_Max };

#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern “C” {
#endif

#endif /* !FT_MODERRDEF */

/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST MODULE ERROR BASES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/

#ifdef FT_MODERR_START_LIST
FT_MODERR_START_LIST
#endif

FT_MODERRDEF( Base,0x000, “base module” )
FT_MODERRDEF( Autofit, 0x100, “autofitter module” )
FT_MODERRDEF( BDF, 0x200, “BDF module” )
FT_MODERRDEF( Bzip2, 0x300, “Bzip2 module” )
FT_MODERRDEF( Cache, 0x400, “cache module” )
FT_MODERRDEF( CFF, 0x500, “CFF module” )
FT_MODERRDEF( CID, 0x600, “CID module” )
FT_MODERRDEF( Gzip,0x700, “Gzip module” )
FT_MODERRDEF( LZW, 0x800, “LZW module” )
FT_MODERRDEF( OTvalid, 0x900, “OpenType validation module” )
FT_MODERRDEF( PCF, 0xA00, “PCF module” )
FT_MODERRDEF( PFR, 0xB00, “PFR module” )
FT_MODERRDEF( PSaux, 0xC00, “PS auxiliary module” )
FT_MODERRDEF( PShinter,0xD00, “PS hinter module” )
FT_MODERRDEF( PSnames, 0xE00, “PS names module” )
FT_MODERRDEF( Raster,0xF00, “raster module” )
FT_MODERRDEF( SFNT, 0x1000, “SFNT module” )
FT_MODERRDEF( Smooth, 0x1100, “smooth raster module” )
FT_MODERRDEF( TrueType, 0x1200, “TrueType module” )
FT_MODERRDEF( Type1,0x1300, “Type 1 module” )
FT_MODERRDEF( Type42, 0x1400, “Type 42 module” )
FT_MODERRDEF( Winfonts, 0x1500, “Windows FON/FNT module” )
FT_MODERRDEF( GXvalid,0x1600, “GX validation module” )

#ifdef FT_MODERR_END_LIST
FT_MODERR_END_LIST
#endif

/*******************************************************************/
/*******************************************************************/
/***** *****/
/*****CLEANUP*****/
/***** *****/
/*******************************************************************/
/*******************************************************************/

#ifdef FT_NEED_EXTERN_C
}
#endif

#undef FT_MODERR_START_LIST
#undef FT_MODERR_END_LIST
#undef FT_MODERRDEF
#undef FT_NEED_EXTERN_C

#endif /* __FTMODERR_H__ */

/* END */