[SOLVED] Java CSE 3341, Core Interpreter Project, Part 3 (Parser, Printer, Executor) Autumn 2019, Dr. Heyms DL 305 12:40 and 1:50 sections

CSE 3341, Core Interpreter Project, Part 3 (Parser, Printer, Executor) Autumn 2019, Dr. Heyms DL 305 12:40 and 1:50 sections
Due: 11:59 P.M., Friday, November 8, 2019
Important notes: This is the third part of the Core interpreter project. In this part, you have to implement the parser, printer, and executor. This part of the project is worth 60 points.
Goal: The goal of this part is to complete the interpreter for the language Core. The complete grammar for the language is the same as the one we have been discussing in class, and appears in Carmen Content under the title BNF for Core, except for the changes specified in the second part of this project. Your parser should use the Tokenizer you have built in the second part of the project, with any appropriate modifications you wish to make to it, of course. (If you have not completed the second part of the project and dont expect to be able to complete it very soon, send me mail immediately so we can discuss your situation.) You should write this part of the interpreter in the same language that you used for part 1. If you want to do something different, first talk to me. If you find any problems with the project description below, please let me know by e-mail. Thanks.
Your interpreter should read its input from two files whose names will be specified as command line ar- guments, the first being the Core program to be interpreted, the second being the data file for that Core program. So if your executable is named Interpreter, the Core program is in the file coreProgram, and the data for that program is in the file inputData, you should be able to run the program by saying either:
> Interpreter coreProgram inputData print
or
> Interpreter coreProgram inputData doNotPrint
where > is the Unix prompt. Your program should output to the standard output stream. State in your README file, discussed below, the command line users should use. For example, where we said Interpreter above, two words could be substituted for it, e.g., java CoreInt could be substi- tuted for Interpreter if that would be appropriate in your case.
What To Submit And When: On or before 11:59 pm, November 8, you should submit the following:
1. AnASCIItextfilenamedREADMEthatspecifiesthenamesofalltheotherfilesyouaresubmittingand a brief (1-line) description of each saying what the file contains; instructions to the grader on how to compile your program and how to execute it; and any special points to remember during compilation or execution. If the grader has problems with compiling or executing your program, he will e-mail you; you must respond within 48 hours to resolve the problem. If you do not, the grader will assume that your program does not, in fact, compile/execute properly.
2. Your source files and makefiles (if any). Executable and object files are entirely optional. If it would not cause problems for the grader if they were eliminated and if, with reasonable effort, you can eliminate them, please do so. Otherwise, dont worry about it.
3. A text file called Runfile containing a single line of text that shows how to run your program from the command line, but without the required arguments stating the paths and names of the input files.
For example, if you are using Java and class CoreInterp contains main, file Runfile should con- tain the line of text java CoreInterp
Or, for example, if your makefile produces an executable file called myinterpreter, Runfile con- tains myinterpreter
1

4. A documentation file (also ASCII text file). This file should include at least the following: A descrip- tion of the overall design of the interpreter, including the ParseTree class; a brief user manual that explains how to use the interpreter; and a brief description of how you tested the interpreter and a list of known remaining bugs (if any). The documentation does not have to be as extensive as you did for the projects in CSE 3901, 3902, or 3903, but dont completely forget the lessons you learned in that class.
Submit your lab by creating a Compressed (zipped) Folder and placing this folder in the Lab 3 Carmen Dropbox. (In Windows, right-click on the folder and select Send To.) Be sure to click to the end of the process in Carmen and to double-check that your submission has occurred. Your most recent submission is your official submission.
Correct functioning of the interpreter is worth 50% (partial credit in case your interpreter works for some cases but not all, or parses but does not execute, etc.). The documentation is worth 20%. And the quality of your code (how readable it is, how well organized it is, etc.) is worth 30%.
The grading system imposes a heavy penalty on late assignments: up to 24 hours late 10% off the score received; up to 48 hours late 25% off; up to 72 hours late 50% off; more than 72 hours late forget it!
The lab you submit must be your own work. Minor consultation with your class mates is ok (ideally, any such consultation should take place on the course discussion forum so that other students can contribute to the discussion and benefit from the discussion) but the lab should essentially be your own work.
Output: When your interpreter is executed with a command such as > Interpreter coreProgram inputData print
it should produce two strings of output (to the standard output stream). The first should be a pretty print ver- sion of the Core program in the coreProgram file; for example, if there is an if-then-else statement in the Core program, that may be output as:
if ..cond.. then
..stmt seq1..
else
..stmt seq2..
end;
where..cond.., ..stmt seq1.., ..stmt seq2..are,respectively,the , in the then part, and in the else part, of the if-then-else statement. The second string of output is produced when write statements in the Core program are executed. If, for example, the statementwrite X, ABC;isexecutedwhenthevalueofXis10andthatofABCis20,yourinterpreter should produce two lines of output:
X = 10 ABC = 20
When your interpreter is executed with a command such as
> Interpreter coreProgram inputData doNotPrint
it should produce only the second string of output; it should not produce a pretty print version of the Core program.
When your interpreter is executed with a command that does not conform to either of the forms shown above, its behavior in that case is up to your discretion. (You may remind the grader of this fact if it appears that your interpreter has been penalized for unwanted behavior in response to a command that does not conform to either of the forms shown above.)
2

Approach: Use recursive descent for parsing, printing and executing the Core program. If you are tempted to do it any other way, dont! Recursive descent is the easiest way to make this work. If you are not convinced, try your alternate approach after finishing the project using the recursive descent approach.
You may use either the approach with a single, monolithic parseTree object, which is an instance of the ParseTree class; or the approach with a number of classes, one corresponding to each non-terminal. If you use the first approach, the ParseTree class should implement the parse tree abstraction so the rest of the interpreter doesnt know how parse trees are stored. If you ignore this issue and implement your interpreter so that parts like the executor are aware of the details of how parse trees are stored, you can expect a severe penalty in your grade. The ParseTree class should also maintain the table(s) containing the names of the identifiers and their current values. Recall also that a ParseTree has to keep track of the current node, and the class must provide operations to move (the current node) up and down the tree. Indeed, we always do things at the current node, rather than with the entire parse tree. If you use the second approach with classes such as Stmt, StmtSeq, etc., there wont, of course, be a ParseTree class. But again make sure that you dont violate data abstraction principles.
If you want to assume a pre-defined upper limit on the number of nodes in the (abstract) parse tree, 1000 would be more than enough; you can also assume that there will be no more than 20 distinct identifiers (each of size no more than 10 characters) in any given program that your interpreter has to interpret. Available on Carmen are a couple of sample Core programs that you can use as inputs to your interpreter.
If you use the ParseTree class approach, the two most complex parts of the project, I expect, will be the ParseTree class, and the parser. Dont start with the implementation of the ParseTree class, instead worry only about the operations it is going to provide. Start with the list of operations we saw in class, and add additional operations that you find the need for as you design the parser, printer, and executor. I doubt that you will find the need for too many new operations beyond the ones listed in the the class notes. One other point: you may find it convenient to wrap the tokenizer object into the ParseTree class; if you do this, the operations of getting the current token, etc., would have to be provided by the ParseTree class but they would be implemented by just calling the corresponding operations of the Tokenizer class. If you use the OO approach, use the Singleton pattern to ensure that there is only one Tokenizer object.
Some Comments:
The main function of your interpreter will do some initialization (perhaps just declare the ParseTree object), and then call the parseProg, printProg, and execProg procedures in that order. Or, if you are using the OO approach, it would create a Prog object and then call parseProg, etc., on that object. Note that negative integers cannot appear as literals in the Core program but negative integers may be in the data file (for the Core program). Additional information about the input format will be posted, as necessary, on the course discussion forum. So please make it a point to read that forum frequently.
3